---
product_id: 224331410
title: "PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube)"
brand: "primochill"
price: "176 Lei"
currency: RON
in_stock: true
reviews_count: 9
url: https://www.desertcart.ro/products/224331410-primochill-11-5mm-od-rigid-tubing-bending-cord-12mm-od
store_origin: RO
region: Romania
---

# PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube)

**Brand:** primochill
**Price:** 176 Lei
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube) by primochill
- **How much does it cost?** 176 Lei with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.ro](https://www.desertcart.ro/products/224331410-primochill-11-5mm-od-rigid-tubing-bending-cord-12mm-od)

## Best For

- primochill enthusiasts

## Why This Product

- Trusted primochill brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

The PrimoChill 11.5mm OD Rigid Tubing Bending Cord is used for bending any acrylic/PETG Rigid Tubing that is 12mm ID. It allows the rigid tube to be heated and bent with less likelihood of the rigid tube collapsing and creating little cavities along the surface of the bent rigid tube. This insert cord is solid and is recommended for more complex bends. The solid cord is a little harder to remove vs a tubed version bending insert and cannot be stretched as much.FeaturesDurable Silicon MaterialSpecificationsCompatibilityTube: 12mm ID Acrylic/PETG Tube onlyParts IncludedSingle 3 Foot Piece of Solid CordWarningsNot responsible for any damage caused by or when using this product. Please use at your own risk.InstallationPLEASE NOTE:A bending insert is meant to have a tight fit. Otherwise, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience and practice.The bending insert requires some stretching and lubricating to get it in the rigid tube. 1. Stretch the bending insert. Remove any excess that isn’t stretched.2. Ream the rigid tube with the RFB or reamer to ensure a clean opening for easier insertion.3. Apply several drops of Tube Lube on the bending insert itself and then place several more drops into the rigid tube.4. Work the bending insert into the rigid tube.

## Product Details

- **Brand:** PrimoChill
- **Power Connector Type:** 3-Pin
- **Cooling Method:** Air
- **Compatible Devices:** Desktop
- **Noise Level:** 14 Decibels
- **Material:** acrylic
- **Manufacturer:** PrimoChill
- **Number of Items:** 1

## Images

![PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube) - Image 1](https://m.media-amazon.com/images/I/61isMUMSxQL.jpg)
![PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube) - Image 2](https://m.media-amazon.com/images/I/51KG9ZnRkfL.jpg)
![PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube) - Image 3](https://m.media-amazon.com/images/I/41WKop2poHL.jpg)
![PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube) - Image 4](https://m.media-amazon.com/images/I/61M0tNwGipL.jpg)
![PrimoChill 11.5mm OD Rigid Tubing Bending Cord - 12mm OD (for 12mm ID Tube) - Image 5](https://m.media-amazon.com/images/I/517kp8VUZ0L.jpg)

## Available Options

This product comes in different **Size** options.

## Customer Reviews

### ⭐⭐⭐⭐⭐ 







  
  
    Fits perfectly/Steps to insert with ease of effort
  

*by C***P on Reviewed in the United States on January 30, 2018*

Boyfriend speaking here:This particular silicone insert fits PERFECTLY with PrimoChill PETG tubes, not with anything else unless tested (Tried Monsoon PETG, ID seems to be slightly smaller than PrimoChill)Please follow these steps (will add photos later) to be able to slide silicone insert in without elbow grease:1.) Make sure you use de-burring/reaming tool to shave ID edge to be able to have a nice fit for the insert.2.) Mix some soapy water inside any cup container. (Any hand soap (yellow/orange)Seems at best than dishwashing liquid) just experiment which is the best ratio for you depending on the soap (I used the brand: Dial, original gold for my application)3.) Use those plastic “oral dispenser” or syringe to suck up the liquid and squeeze a bit of the SOAP in the tube WHILE inserting the Silicone Insert.4.) Easily twist the insert Anti/Clock-wise and should insert easily unless you forgot to clean out the tubes with the residue from reaming/de-burring the inside that would end up damaging the insert.- Make sure you squeeze some soapy water after every couple of inches inside the PETG tube if you seem to struggle. The slant created by the de-burring/reaming should help slide the soap inside.. could help if you push against the silicone insert as well if you have any trouble sliding the insert.I’d be glad to post a quick video as well if anybody needs a better clarification. Hope this helps anyone :)

### ⭐⭐⭐⭐ 







  
  
    Good length.
  

*by E***T on Reviewed in the United States on September 1, 2017*

In order to make a spiral out of PETG tubing, I needed 3 feet of Silicone insert.  This product did fit the bill.  Nevertheless, for me soapy water did not help with getting the silicone insert into the PETG tubing.  I ended up having to use olive oil, which I washed out with soapy water when I was done.  The technique I used to get the insert into the PETG tubing was twisting or turning in one direction.  I hope this helps someone out there trying it for the first time.

### ⭐⭐⭐⭐⭐ 







  
  
    Tube bending made easy with the PrimoChill Silicone Bending Insert
  

*by J***E on Reviewed in the United States on July 29, 2019*

The PrimoChill Bending insert makes bending your PC Water Loop easy by keeping the inside uniform and smooth. Works on all the hard  tubes and easily comes back out with some pre inserted lube before bending. Can be reused many times, we have actually used this one on about 15 PC builds. Makes you custom water loop look and feel better with this great tool.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.ro/products/224331410-primochill-11-5mm-od-rigid-tubing-bending-cord-12mm-od](https://www.desertcart.ro/products/224331410-primochill-11-5mm-od-rigid-tubing-bending-cord-12mm-od)

---

*Product available on Desertcart Romania*
*Store origin: RO*
*Last updated: 2026-03-01*