E12 Candelabra LED Bulb, 9W(60 Watt Light Bulbs Equivalent), Non-immable, Soft White 3000K, Metal Shell, 360 Degree Angle for Chandelier Home Lighting, 6 Pack, Chener

The pins are a little thin, so these bulbs are a little loose in their sockets. I imagine if it wasn't for the glass covers and the tight quarters inside the puck lights, with a little banging around of the cabinet doors, one of these bulbs could actually fall out. Also, as some others have mentioned, the touch dimmer I had/have my puck lights connected to doesn't really care for a full contingent of these bulbs so to make it work properly I've had to leave one xenon bulb in one of the fixtures. This is a failing of the dimmer, not these bulbs. I'm looking for a replacement touch dimmer that is suitable for LEDs, so far without any luck. Other than the thin pins, I really like these bulbs. They are brighter and whiter than the 20W xenon bulbs these replaced. These also run very cool, whereas the xenons were hot enough to literally scorch the finish on the bottom of the cabinets. When you add up the positives and consider that the xenons aren't cheap, burn out quite regularly and run hotter than heck, I'd say replacing them with these was a great idea. Now if I could just find another touch dimmer...

They sit nicely into undercounter puck lighting BUT the wire 'legs' are way too thin. About 1/2 the diameter of a standard bulbs legs.I had to bend the leg slightly at 1/2 length for then to make contact, then they worked well.My lights have a 3 step dimmer to them, these bulbs do not flicker but the output is higher than the standard bulbs in the dimming states.I do like that they are one sided replacements so all the LED output is focused downward.

- These fit well into 120V AC undercabinet puck light fixtures.- They run considerably cooler than the halogen bulbs they are replacing.- The light color emitted is whiter than the halogen.

I bought these for some undercounter lights that have a 3-way switch (off and 2 levels of brightness) because some other non-dimmable kind I had were fine on max brightness but flickered on the low brightness. These, unfortunately, despite being dimmable still flicker on the low brightness. The packaging also left much to be desired as they arrived in a thin cardboard mailer and when I opened it, several bulbs were falling out. The boxes they are packed in are very minimal offering almost no protection and don't stay sealed inside the mailer; even a small piece of tape would've been sufficient.

Not working on regular candelabra lamp, the center contact is too short and don't make contact with the lamp. waste of time. Sometime cheap don't work

They work. Note that the pins are very thin diameter - they may not fight snugly into a socket.

..

working great.