Prime-Line N 7302 Bi-Fold Top Mount Pivot and Guide, 3/8 In. Pivot Cap, 3/8 In.. Base (2 Pack)

Easy to install and worked perfectly.

I have four bi-fold closet doors. The original ones were installed 40+ years ago. I recently had to remove the bi-fold doors for wall and floor repairs. Before reinstalling, I needed to replace all the bi-fold door hardware sets. I thought all the hardware sets would be a “universal” fit so I didn't measure when ordering. I discovered that they are “universal” EXCEPT for the nylon top guide wheel which are almost 1-inch in diameter. That size is way too BIG and the plastic guide wheel is not removable. I thought I was going to have to replace the entire top guide rail, but luckily I found the Prime-Line N 7302 Bi-Fold Door Top Guide Wheel, 5/8 inch Wheel. This is the top guide wheel size that fits my 40+ year old bi-fold doors. I guess newer bi-fold doors have thicker, wider, and more durable top guide wheels. I guess I’m lucky that they still manufacture and sell the smaller diameter top guide wheel but I think they will soon be “dinosaurs”, i.e., extinct or no longer manufactured because of low consumer demand.

Fit perfectly

Exactly as described. White plastic roller sits loose on pin (didn’t matter for me). Was expecting it to click in possibly

Perfect

I either have a stupid door or this is about a 1/4" too short from standard. Jumps around a lot and the topper is very short compared to the original one. House was built in '94 so maybe that has something to do with it? Maybe my door can be raised up so the guide fits correctly. I'll search it out and conclude my review later.

The media could not be loaded. In connection with a recent remodel I had to trim the height of our bedroom closet bifold doors, and in the process I replaced all of the hardware on the doors. But the top guide for one of the doors wasn't optimal (too much metal on metal in the track) so I ordered these.They do work (as the video will show) and I'd say that they reduced the metal on metal contact by about 50% for me. So just for that the purchase was justified. I still get a little of the metal to metal sound, but at least it's less than it was. I'd much rather hear soft plastic gliding against the metal track than hear metal scraping along the track...

ok