HSEAMALL 15 PCS Router Bits 1/4 shank for Palm Router Tool 6.35mm Tungsten Carbide Tipped Router Bit Set Wood Milling Saw Cutter

Ideal to go with the router I bought for my son works a treat. Good value

These are not top quality bits but they are OK and they will get you started. There are many ways to use a router and it is usually impossible to predict all of the uses you will put it to when you first get one. With that in mind a cheap set of bits like this is a good buy as it is varied and capable, allowing you to explore the things you can do with your own router. Two of these bits I wore out pretty quickly, but I replaced them with bits that each cost more than this entire set. The remainder of the bits in the set have mostly been used once or twice. That's what I expected to happen and because this is a cheap set I don't consider it a waste — I bought this set to help me learn and they worked very well for that and allowed me to make some fine things out of wood as I learned.Recommended if you're new to using a router — once you find out which ones you actually use you can buy better quality.

Great value and a clean cut.Buy these in preference to other cheaper versions and you won't be disappointed.The box is acceptable and mention this as some have moaned.I did not buy this for the box.For a half inch set these can't be beaten and look forward to seeing how long they last.

This small set of commonly used router bits are perfect for my new Katsu router, which I bought as a complimentary router to go with my large one. The bits are well made and well selected too. I admit I quite enjoy routing and have to say that using my new router and these bits is a lot easier (and less stressful) than using my main one.The bits come in the red case, as per photos, are very well made and finished and should last for years. Normally I would be looking at more expensive bits, but to be perfectly honest, these have proved their worth already. I am happy to recommend these to you.

For the price I thought these cutters would be rubbish. They aren’t they work well. I have only used 3 of them but one the 6mm straight cutter extensively (for a DIYer!) I find it to be just as sharp a it was on the first cut. I only take off half the dia. of the bit on each pass so 3mm each time, it coped easily,on the one occasion I forgot and took 9mm out in one go it also coped without damage to the timber or bit. I am pleased with these and would buy again

A good selection of bits, ideal for getting started. I didn't know which bits I'd end up using more so got this set, which will allow me to experiment and later upgrade/replace as needed.First impressions weren't great as the paint blistered and peeled off the first one I tried - the chamfer bit, on some scrap 18mm ply. I've adapted by taking multiple shallower passes, and the other bits haven't suffered the same fate.One word of warning and a reminder to always wear eye protection was that the bearing on the flush trim bit disintegrated while trimming a 5mm overhang of 3mm hardboard, sending shards of sharp metal flying, fortunately only embedding them in my garage wall!

Firstly, as others have commented, the wooden case supplied is very flimsy to the point that it arrived in pieces (see photo) Normally I would have returned it for a replacement but I'd ordered an alternative set from a different supplier which, despite being ordered on the Thursday still hadn't been dispatched the following Monday (Prime) As I was keen to get on with my project I elected to keep this set and managed to repair the box using copious amounts of glue. Now, about the bits. I only used three of the bits and they did the job admirably on a piece of pine. Obviously I can't comment on how they'll perform with continued use but if you want a set for the odd project I would say at the price these are an excellent buy. Probably worth 5 stars but lose a star for the woeful quality of the case.

Brilliant product

Me parecen unas brocas acorde a su precio, están bastante bien las uso en carpintería profesional y todavía aguantan sus rodamientos y la capacidad de sus fresas.

Habe die Nutfräser zum Schubladenbau gebraucht,Material:beschichtete Spanplatte.Nach dem ersten Meter merkte man schon deutlich die Abnutzung.Fräslänge pro Schublade ca.4Meter.Nach der zweiten Schublade war der Fräser tot.Nicht nur das er stumpf wird und heiß läuft ,an der Stelle wo er an der Materialkante läuft hatte die Schneide sich durch Temperatur und Belastung regelrecht verformt.Mit dem zweiten Fräser und zwei weiteren Schubladen das gleiche Spiel.Habe mir dann weil ich keine Lust mehr auf Experimente hatte und fertig werden wollte Fräser von ENT bestellt.Mit nur einem Fräser konnte ich 22 Schubladen fertigstellen und der Bursche schneidet immer noch gut.

Finition de menuiserie

Bom

Spedizione ed imballaggio, ottime.L'articolo corrisponde perfettamente alle aspettative.Prodotto ottimo sia per la qualità che per il prezzo.