FJNATINH 30cc Needle Tip Glue Squeeze Bottle, Precision Tips Applicator Bottles, 5 Pack

Great little bottles. I use them for super glue and they are a game changer. The silicone caps keep them sealed so there is no issues with glue drying in the needle like it would happen with a standard glue bottle. The precision needle tip also makes glueing together parts much easier.

I needed a bottle with a small tip to apply grout sealer and the worked great. What is nice is the size of the bottle and the amount it holds. The clear color makes it easy to see how much you have on the bottle and the platic holds up well.

I got these to do some minor repairs on a guitar. I needed to get glue into some small crevices and these work very well. Some people have complained that you can use the tips once you used them because the glue dries inside. That's true, but it's hardly a fault of the product. It's what happens when you leave glue in a small needle applicator. It will dry and clog. This happened to me on the first use. I figured I'd just use a fresh tip every time I needed to use it, but on the second use I realized that when I was done, I could just take the tip off and put it on one of the other bottles and fill it with warm water and flush all the glue out. Then I could put that tip back on the bottle with the glue in it and use it again days later. Worked fine.

I really, really, really love the selection of bottles and caps in this listing. I haven't tried all the bottles and nozzles yet, so my tentative review is - skeptical. I purchased a 4-pack set of Darice Bottles with Needle Tip Applicator a while ago. I loved those bottles - perfect small size, but the needle tip cap on every one BROKE because it was made from some hard, but brittle plastic that if you dropped the bottle - it would crack. And you couldn't repair it, so I was on the hunt for some better bottles and came across this listing. I love the fact that there are so many needle tip sizes, too. So everything came as listed - the bottles look great, they feel amazing - nice and soft, and all the tips seem wonderful. I decided to test one - I filled one of the small bottles with Aileen's Quick Dry Tacky Glue - just like the Darice one I had was filled with. And I used the smallest steel needle on it. The Darice one worked perfectly. THIS ONE - no. it's a PAIN to try to get the glue through the nozzle. I have to squeeze the bottle so hard that it makes my fingers ache. So, maybe the smallest needle just can't handle the thickness of the tacky glue - maybe I'll have to thin the glue down or go up a size on the needle tip. In any case - I have to experiment. I didn't have to experiment with the Darice ones - just put the glue in and they worked and the needle tip was just as narrow as the one I used in this set. I wish Darice would just use different plastic - one that didn't crack so easy because their bottles and needles are great and they come with non rusting stainless steel pins. Sigh. I think these bottles will turn out to be ok, I really do - I just will have to find the right tip and the right glue. I think this is worth the purchase, but we'll see. These will get clogged and rusted because, really, you should put a pin in them. I just wish I could purchase non rusting stainless steel pins for them because the pins I bought from Amazon didn't work - they rusted in these. If anyone knows where on here we can find REAL non rusting stainless steel pins - please list them in the comments. That's the key to not really regretting these - even with the tiny caps - you still need the rustproof pins to keep the glue from drying/clogging up the needle.

I bought these to use for alcohol ink. Since I only use a drop or two at a time, I thought these would be useful. They leak terribly no matter how tight I screw the cap on. I would not recommend.

I used these bottles to apply CA glue to scale models. The biggest concern that I have is that while the cap screws on securely, the tip is merely a press on fit. Initial use offered no issues or resistance to applying CA glue. Unfortunately, as is the case with most metal nozzles, glue builds up blocking the application of new glue and you have to heat it with a lighter to get the tube to open.Two problems with this setup:1. The nozzles are very short so not a lot of room to work with2. After using the bottle on a scale model, I covered the tip with a protective plastic cover I had. Using it three days later the tip was clogged (normal on any glue bottle) but after clearing the nozzle, I did a test flow delivery on cardboard and the tip popped off, emptying a large amount of CA glue... ( Note to self... ALWAYS test glue flow on something you do not care about!)I bought this not knowing about the press on fit tip. In the future I will be more careful to more fully examine glue bottles prior to purchase.If you have these, just be really careful and ALWAYS test CA glue flow prior to applying to a model part.

PERFECT! These were exactly what I was looking for! I have so many different squeeze bottles but just couldn't find the right ones...UNTIL NOW! I saw the slanted tip and had a feeling it would work for what I was thinking and it sure did! I do a lot of resin art and wood art and just needed something to get into a project I was working on and I had some ideas for a few things where a brush and my other tips weren't cutting it so off to Amazon I went looking. I figured there just had to be something out there and if not I was going to have to come up with something! So happy this worked! Bottles are easy to squeeze, comes with lots of tips, they washed out perfectly. Lids fit nicely, no leaking. Highly recommend and definitely worth it for all you get. Thank you and have a magical day~