KRYDEX IPSC USPSA IDPA Competition Shooting Multi-Angle Adjustment Speed Shooter's Pistol Magazine Pouch Mag Holster Holder

I ordered one of these to pouches to test it out. Loved it so much I ordered 4 more. These pouches are identical to the Black Scorpion pouches. Exactly the same. The only difference is the Black Scorpion emblem. They are fully adjustable. They have a swivel tension mount so you can rotate them and cant them towards or away from your body. You can also raise or lower them on the belt mount. The only negative I have is that it takes a bit to get them mounted on the belt so they don't lend well to a rig where you're swapping or moving the pouches often. Other than that, they are a great value. One recommendation is to use Loctite on the threads once you get them to where you want so they don't loosen and move Mainly the main screw that holds the swivel mount.

I like the adaptability of these mag holders. Fits Evey magazine size and shape. Very sturdy and sound construction. They hold the magazine just right with adjustable tension , even great for upside down carry if you need too. I have purchased another set. If you have magazines and need them attached to your body or bag, then these do the job and then some.

These mag pouches are a fantastic deal with a couple of caveats. I wasn't interested in dropping a ton of money on mag pouches when I first started shooting USPSA matches. So, I decided to give these a try. At such a low cost, I figured the risk was worth it. I have been impressed with their performance and they have never let me down. I do not consider them to be more or less effective than many other expensive brands. However, there are two issues worth considering before you purchase. Initial fitment isn't painless. Other styles you simply latch over your belt and you are ready to go. These guys must be disassembled and then screwed down again on top of your belt. You will also need to adjust the tilt of the mag pouch using an Allen wrench. The spaces and tolerances are a tight fit. It might be difficult for folks with large hands to get this chore done easily. Consider using Loctite to keep your hard work in place. The second issue will only impact smaller framed shooters. In USPSA, a shooter is allowed to carry a considerable number of mag pouches. These pouches are a bit wider than most. This results in the ability to effectively carry more than 3 mag pouches on a smaller sized person. The size and shape of my waist will restrict me to 3 mags instead of 4. If you are average or a larger than average waist size, this shouldn't be an issue. In conclusion, these mag pouches do involve some effort to set up before your first shoot. However, I believe the cost savings to be totally worth the time investment!

These are exactly the same as the BSG Precision Series for little as $10 each compared to $28.99. The only difference is that the BSG has an aluminum decorative panel where this item has a plastic one. They are very good pouches. You can adjust the ride height, pivot and angle for custom positioning.

The best bang for your buck, however, it's a real pain to attach to your belt. You've got the four tiny hex bolts that are somewhat blocked by the belt attachment - really frustrating to turn a standard allen key. And the bolts are super easy to lose if you're not careful - pro tip, use tape on the back side of the bolts to hold them in place while you're tightening them onto your belt. Retention is below average, I'm using Walther PDP double stack 9mm magazines, and I can't seem to torque down the retention bolt far enough to get a snug fit. The ability to set infinite angles of cant positions are outstanding though and easy to adjust. Overall, worth the price. I wouldn't trust my life to them or use them for any important USPSA matches, but perfect for a new shooter or weekend run and gunner.

Great alternative to the big name brands out there at a fraction of the price. Looks great and fits well on my competition belt. Excited to use it.

I'm running a G21 45acp magazine in these, they hold somewhat okay. The insert that is interchangeable to adjust for different magazines falls out easily. The small nuts don't lock on the back of the holder and fall out too easily. They don't offer any extra nuts in the package or any extra magazine inserts, so if you lose one, your out of luck. I've used these in two training sessions and in not sure that I keep using them going forward. Id suggest looking at another system, this one isn't user friendly enough.

I haven’t run them in a match yet, but they appear to be quite sturdy and easy to convert from a double stack to a single stack (to run with my 1911). These are very impressive for the price and I was just practicing dry reloads and was very happy. I would say worth every single penny. They were challenging to get into my belt, so now that they are on, they are staying on. So if you are someone who likes to swap around setups, I wouldn’t recommend these or I would recommend getting a second belt (that’s what I did). I do have two minor complaints, but again for the price, I can live with both of these: 1. I wish these came with instructions of some sort on swapping out the spacers and how many of the rubber washers you should leave in so that it makes your adjustments a little easier (again a very MINOR thing) 2. I wish the panel on the front that allows you to access the screw that adjusts cant of the mag was easier to get off (again, A very minor thing).

These work awesome. I’m no competition shooter but I’ve ran my mags through them a ton and they have held up perfectly. They showed up exactly as they were advertised. Fast shipping as well!

They work well with Glock mags

These mag holders are affordable knock-offs of high end, competition-oriented holders which can cost 3x+ more per unit. If you are patient and handy with small tools, they can provide a low cost entry into competitive practical shooting sports. They are highly adjustable to a range of magazines and fit most common belt systems (up to 1 1/2” width). Made of plastic, they will not have the lifespan of high end units made of aluminum etc., but until you get into high frequency, intense practice and competition sessions they do the job. You have to spend time adjusting them to fit your mags, dealing with many tiny nuts and screws as others have mentioned (would be nice if company included some spares as they do tend to go walkabout!). Getting them mounted on your belt is also a bit of a pain; once you get them setup you will want to leave them on. As shown in accompanying pictures, I made a couple of mods which improved holders a bit. As they come, mag retention is by friction alone, which changes with use, temperature, etc. You can tighten the top black knobbed bolt down for secure retention, but then mags may be sticky to pull out. I epoxied 3/4” by 1/8” thick rare earth magnets to the inside center of the outer panel of each holder, so the magnet was centered over the fortuitously positioned hole through the inner panel of each holder (silver disc visible in photo). The resulting clearance is perfect for effective mag retention, without any scraping or interference and allows one to reduce the friction screw pressure, giving a secure but slick action. Note some competitions disallow magnet-only holders; it’s not clear if they would rule this system out, but if that ever was an issue one can quickly undue 2 nuts and remove the outer panels with attached magnets and use friction retention alone. Also as seen in photos, I drilled a tiny pair of holes in lower rear corners of each side of holders, and pushed through a 4-40x1” screw, with a piece of black plastic tubing as a spacer (cut to fit my mag thickness), with a nyloc nut on inner end. This addition made the mag holders much more sturdy and stable. Finally, as others have suggested, once I had all the holders adjusted so mags fit well, and got them mounted on the belt at the correct angles (tilting slightly away from belt, and slightly forward works), I applied blue medium threadlock to every nut and bolt (except top friction knob) and retightened everything carefully. Several friends use these holders as well, without modification, and seem happy. They use the holders with Krydex belts which also seem fine. I had a similar but higher-end Black Scorpion belt, on which these customized holders also work well.

Seems well built. Easy to switch to lefty holds glock and smith&wesson mags supper tight but are easy to pull out and put back so There great for speed loading but these are my first mag holders like this so i have no other brands to compare too. I will repost. If they break

Received this 2 days ago, and they are great. Packaging was great. Only thing that I question is that to adjust the angle and/or tightness of mag holder you need an Allen key which was not included. I didn't take off a star because almost everyone has allen keys. These mag holders are a welcome addition to my range days.