Dremel Flex Shaft Rotary Tool Attachment, Comfort Grip, 36” Cable (225-02)

I just started wood carving and was just holding the Dremel to carve with. A person I watch (Jordy Johnson) suggests the Dremel Flex Shaft so after a week of carving without one I ordered it. Fit right up to my real old Dremel (2100) My next order is the 4300. Anyway, fit my old Dremel perfectly, I broke it in as suggested and spent the day carving a lot of Aspen wood. It is so much nicer and easier holding the flex Shaft instead of t the entire Dremel. I do wish it was a bit longer like 42-48 inches long but I'm sure that would be a huge workout for a Dremel. This works and makes carving much nicer. I would say a must have if your going to start carving.

I’ve been using the Dremel Flex Shaft attachment for over a year now, and it has completely changed the way I use my rotary tool. If you do any kind of detailed work, this is a game-changer. Flexibility & Precision The biggest advantage of the flex shaft is how much easier it makes fine, detailed work. Instead of holding the full-weight rotary tool, you can use just the lightweight handpiece, which gives you much better control. This is especially useful for engraving, polishing, and intricate carving. I’ve used it on wood, metal, and resin, and it handles all of them well. Ease of Use & Comfort Attaching the flex shaft to my Dremel was straightforward. It screws onto the tool easily, and the inner cable rotates smoothly. The handpiece is much more comfortable to hold for long periods compared to gripping the bulky main tool. However, I’d recommend hanging your Dremel on a stand or hook to prevent strain on the cable. Durability & Maintenance So far, the build quality seems solid. The cable runs smoothly without any kinks or resistance. Just make sure to keep it properly lubricated as recommended in the manual to extend its lifespan. Some users have reported issues with the inner cable breaking over time, so I’ll update this review if I run into any problems. Things to Consider • The flex shaft does get warm after extended use, so take breaks if needed. • You’ll need to occasionally lubricate the inner cable for smooth operation. • Make sure your Dremel has a high enough RPM rating for optimal performance. Final Verdict If you do a lot of precision work with your Dremel, this attachment is absolutely worth it. It makes carving, engraving, sanding, and polishing so much easier and more comfortable. Just take care of it properly, and it should last a long time.

Made by Dremel and fits Dremel tools perfectly. Useful for demurring and smoothing where you have to move free-hand; using the tool without the attachment is awkward because of its size. This solves the problem perfectly. I continue to be amazed how the OEM brand is priced so competitively and because it's designed to fit, it works perfectly every time. A couple of dollars more than some off-brand and no fitment issues whatsoever, as well as having the OEM quality.

Works as expected but it gets very hot very quick and it makes a lot of noise just like any other flexible extension. I think they need to better justify their steep price

This is my first experience using a Dremel, and I am already excited about all the possibilities this little tool is going to open up for my woodworking and craft projects! I have a small woodworking shop and enjoy taking pieces of offal and turning them into something unique. I wanted a tool that would let me add more detail to my projects, shape and smooth those hard-to-reach areas, and give my finished pieces a more polished look. Being completely new to a Dremel, I was a little unsure about how difficult it would be to learn, but I have found it easy to use and I'm having fun experimenting with the different accessories and learning what each one can do. That's probably what excites me the most—there are so many different attachments and accessories available that I feel like I've only scratched the surface of what I'll eventually be able to create with it. I'm looking forward to learning new techniques and seeing where my creativity takes me. I have a feeling this is going to become one of my favorite and most-used tools in the shop!

My wife has a Dremel that's old enough to have stories to tell, so I wasn't entirely sure how well this attachment would work with it. As it turns out, it fit perfectly and worked right from the start. The biggest advantage is comfort and control. Instead of holding the weight of the entire tool, you're working with a much lighter handpiece, which makes detailed work feel more natural and less tiring. The difference was noticeable almost immediately. The flex shaft runs smoothly, installation was straightforward, and it has performed exactly as hoped. It's one of those accessories that doesn't just add a feature—it changes how you use the tool. If you have an older Dremel sitting in the shop, don't assume it's too old for this attachment. Ours wasn't, and the combination works beautifully.

I own the Dremel 8000-03 Cordless which is only 14oz. I partly bought it because I wanted a relatively light tool for small work. Most of the usefulness of the flex shaft attachment is in reducing the weight of what you have to hold in your hand for detail work, so this attachment isn't quite as useful to me as it would be if I had one of the corded models that weights twice as much. I bought it anyway, along with the Dremel 575 Right Angle Attachment just so I'd have it around in case I needed to get in to tighter spaces or needed further "weight reduction" over holding the tool itself in one hand. If I were using a corded model it would be absolutely essential for me for what I do. Because it isn't something that I normally need, I haven't used it that much and probably won't use it routinely, so I can't properly speak to its durability. (I usually go back and update these reviews after a while though to update people on that.) But in my testing it feels very sturdy and solid and so I feel confident in its ability to hold up when maintained properly. (Not stored so that it bends at sharp angles, greased at intervals as specified in the manual, etc.) It seems to have no problem working with the Dremel 4486 Keyless Chuck . Attaching and removing the flex drive from the tool itself it is similar to attaching and removing the right angle attachment (you need to replace the collet nut or chuck on the rotary tool with a "drive" adapter that the cable slots into) both of which are pretty easy. I am not entirely sure if it's OK to attach the right angle adapter to the handheld part of the flex shaft as it seems like together they may create too much friction on the drive and thus possibly too much additional load on the motor. (Remember these rotary tools power accessories based on speed, not on torque. High speed low torque often does not deal with too much continuous load very well.) Anyone who knows if this is considered OK or who has long term experience using both together please post a comment. A couple of things that you must keep in mind when using this: 1) You really do want to hang the tool up above where you're working when you're using this flex thing. I can't say exactly why, but most likely it has to do with keeping the amount of friction low (increased when more of the shaft is curved vs straight) and keeping the shaft from bending at too sharp of an angle. If you have the Dremel 220-01 Work Station drill press type thing then that comes with an extendable hanger but I can't see any good reason to buy that thing just to get a hanger. In fact almost anyone could come up with something much less expensive and more secure than using the hanger on that. Screw an eye screw into the ceiling and hang it from a rope or run a "clothesline" across your work area and hang it on a couple of "S" hooks, or something. If you don't hang the tool I doubt the shaft is going to shred itself immediately but I'm sure it won't last as long, will be more likely to get damaged by an accidental sharp bend, and won't be able to run at as high of a speed due to the increased friction. 2) NOTE! In case you miss the little note in the box, you really do want to run this thing at high speed for a couple of minutes with it hung straight down and no accessory attached. It'll make some disconcerting little ticking sounds at first but those will stop after several seconds. I suspect the point of this is that you want to evenly distribute the grease inside the shaft before running it while bent or otherwise doing any real work. Again, I doubt you'll shred the thing if you don't do this, but at the very least you might have a little trouble with your grinding, etc, for a minute if you try to use it immediately since it's going to distribute grease or otherwise break itself in when first used no matter what. It really will run at 35,000RPM and it really is OK to run it like this for two minutes straight without doing anything. It won't whip around or anything so this is pretty safe. (My cats weren't even that afraid of it while it was doing this.) 3) You will need to grease the thing at periodic intervals as the manual says or you will eventually shred the flexible cable inside the jacket. The grease you use for this is as common as dirt at auto parts stores though. So in short, this attachment is pretty important if you want to use a heavier model of a dremel in one hand. The other option in this case is to buy an additional smaller rotary tool for one-handed use but you'll probably end up with less power for more money if you take that option. If you already have a light tool that you can hold in one hand for a sufficient time without much trouble then you might want to hold off on buying this until the need arises. But in any case, this is a solid quality attachment that you'll likely be very happy with if and when you do have a use for it.

Works really good to use when carving in wood or metal. I have made Alot of stuff with it.

Não usei ainda, mas o produto veio solto dentro de uma caixa muito maior que ele. Embalagem muito ruim

This thing is fantastic! Absolutely took my carving to another level. So much easier to use than the bulky original Dremel. I would recommend having a space to work where you can hang the Dremel from as I tend to move around a lot with my work. It's small lightweight and ergonomic design make it so you can work for longer stretches without fatigue. Won't go back and would highly recommend.

Es un excelente producto, funciona bien con un dremel 200 y hasta la fecha después de años

alles ok

2本目です。1本目はかなりの頻度で使っていましたが、無理な負荷をかけてしまったため、ワイヤーが中で切れてしまいました。 使いやすく、頑丈なので再購入です。