BOSCH 50011266 QuietCast Premium Disc Brake Rotor - Compatible with Select Lexus RX330, RX350, RX400h; Toyota Highlander; REAR - Single

Lots reviews indicate parts sent was incorrect to the application. I was nervous about that, as I am a shade tree mechanic. I’m so shade tree I don’t even have a tree. Did my rear rotors and pads in the parking lot of my condo complex. For me both the rotors and pads fit perfectly. Great as it was 22deg at the time. Everything went on perfectly. You got the parts correct for my application on the first order, as it should be. Thank you

I did bosch quiet cast pads and rotors on the front of my '07 Acura MDX in an afternoon. It was only my second time doing brakes, but it was super simple. maybe, like 3 hours including jacking and tool prep. I had warped rotors from towing my boat around a couple summers, which manifested as pulsating braking at extreme stops. i didn't have any low pad noise alerts, but why risk any issues with your brakes. I researched and bought the best premium brand and oem setup. I didn't want to experiment with ceramics or slotted/drilled sporting setups, since i wanted longevity and reliability. after 2 weeks I can say these are so smooth and quiet, couldn't be happier. I wish the kit had come with the springs/pad spreaders, but i just reused the originals. i like that it came with the grease. well worth it for only being $50 more than no name amazon parts or similar parts store rebrand rotors.

26010768 shows correct fit for 2006 Honda Pilot EX-L however this rotor did not fit. (This is incorrect on Amazon and Bosch’s site - however this part is for Acura TL 04-08For 2006 Honda Pilot EX-L, use part 26010733

These were too small for my vehicle. Amazon had this as compatible with the info that I provided for my vehicle. 2010 toyota matrix s 2.4l. Perhaps this fits a 1.8l. Can't say for sure. I ended up getting my rotors turned for $25 a piece since they still had some life left in them and were not warped. Go with turning your rotors if possible. Big savings.

These rotors are professional grade and dealer quality. Top notch. Just make sure you have the right part number when you order them. You can’t go wrong as long as you break them in properly. Go for it.

Bosch 26010750 front brake rotors measure 10.25" in diameter. 26010731 measure 11" in diameter. This info is not in Amazon's listing or on Bosch website. My 06 Civic EX 4dr automatic grocery getter takes the smaller ones. Of course I ordered the wrong ones first time. You're welcome.

My CRV doesn’t get to the track - so quality, undrilled, unslotted discs are fine. You want them to run true, run quietly, and stay unwarped as long as possible. The first two are checked, the third, I’ll have to wait and see… but I went for Bosch because of their name. Good discs so far.

Excellent work

These QuietCast premium brake rotors are great. They were easy to install. They are a lot quieter then the old rotors I was replacing. Every time I do maintenance, they would still be in a fantastic condition so the quality and durability is very good.

I had previously bought Bosch's QuietCast line for my 2010 Honda Civic and they were perfect. They were quiet and my brakes worked better than before. With this experience, I bought these for my cousin to replace the rear rotors for his 2006 Toyota Avalon. These fit them exactly. They are quiet when braking. Would recommend these premium brake rotors.

I installed these rotors with the Bosch application for pads (Bosch BC1044 QuietCast Brake Pad Set) for my car (a Mazda 3 with the 2.0L non-skyactive engine). The braking performance is top notch. At least as good as OE, if not better. Dust and wear rate better than most aftermarket stuff like Certified, Wagner, Monroe, etc). However, the one and only issue I have is, often when cold and/or wet, and the car has sat for at least a few hours (over night), upon first brake application, particularly a light brake application, there is a bit of squeal. This goes away after the first brake application or two, but it is quite predictable based on the conditions described. And yes high-temp anti-squeal brake lube supplied with the pad kit was applied to the back of the pads.

These rotors are excellent. You can tell the quality when you pick them up and handle them. They fit my 2012 Honda Civic LX perfectly.I have installed these rotors for 4,000 km now and they are performing excellently. I am very happy with them. I recommend them to others.UPDATE:I have now driven with these rotors for 40,000 kilometers. They don't rust as quickly along the vented portion as did my OE Honda rotors. They are really great rotors. The only thing I wanted to mention is that I had to bend the dust shield back 1/4" away from these rotors upon installation. That's because after I installed these rotors, they were making contact with my dust shields on both sides. It was no issue to fix the problem. I just took a pair of pliers and bent the dust shields back and there is no more contact being made between the rotor and dust shield. Other than that, these rotors have been 100% awesome.

The rustproof coating really seems to make a difference. I feel that these will outlast many other non coated rotors, as this will prevent corossion around the vents of the rotor. My previous non coated rotors ended up being badly rusted at this location and that contributed to shorten the life of the rotors and, of course, the pads aswell. I paired them with Bosch Quiestcast pads (please, dont buy cheap pads with premium rotors!). It works flawlessly. Smooth and efficient. Now my car feel safer and more predictable. Good fit for Honda Civic 98 (front). You always get your money's worth with Bosch. They never dissapoint and always meet expectations.