Acrylic Panel and Case Joystick DIY Set Kits Replacement for Arcade Game Machine Cabinet Controller DIY Kit
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

Acrylic Panel and Case Joystick DIY Set Kits Replacement for Arcade Game Machine Cabinet Controller DIY Kit

4.2/5
Product ID: 140092839
Secure Transaction
💻PC Compatibility
📏Compact Size
🔩Complete Kit

Description

🎮 Build Your Arcade Dream - One Button at a Time!

  • EASY INSTALLATION - Includes all necessary screws for a hassle-free setup.
  • ROBUST AND RELIABLE - Crafted from durable acrylic and plastic for long-lasting fun.
  • CUSTOMIZABLE EXPERIENCE - 8 pre-drilled holes for buttons, allowing for personalized gameplay.
  • UNLEASH YOUR INNER GAMER - Transform your arcade experience with this DIY joystick kit!
  • PERFECT FIT FOR YOUR SETUP - Designed for seamless integration with PC systems (XP, W7, W8, W10).

The Acrylic Panel and Case Joystick DIY Set is a versatile replacement kit designed for arcade game machine cabinets. It supports various PC systems and features a compact size of 26 x 15 x 4.5 cm. The kit includes a robust plastic base box, an acrylic panel, and all necessary screws for easy assembly. With 8 pre-drilled holes for buttons, it allows for a customizable gaming experience.

Have a Question? See What Others Asked

Hello, do you sell a model for 2 players?
Fit a trackball ? Or spinner ?
Are you sure all 8 holes on the Black2 are 30mm? The picture shows differently
Can the faceplate be assembled in reverse? Meaning the joystick will be on the right and buttons on the left?

Reviews

4.2

All from verified purchases

J**E

Nice diy gamepad

Its made better then expected and really like this case the suction cups work extremely well my only negative thing is it collects fingerprints way to easily but easily solved with a graphics decal definitely planning on getting another one. Great buy

A**L

It's cheap, but works

It's cheap, and it's solidly built. Can't really complain. The three top holes are not 30 mm but rather 24 mm. If you don't have 24 mm buttons, you'll have to make some modifications. I used a 1 1/8th Forstner bit and increased the hole sizes to accommodate 30 mm buttons. Additionally, the text and outline around the Start button hole flake right off. So, if that matters to you, be warned it's not going to remain.

J**A

Perfect fit

I had built a cabinet and it became hard to move and work with... These replaced that and I just need to connect the two controllers to the RetroPie I was using before... it is not the same but it was a great approach to keeping everything neat without sacrificing the arcade experience.

A**R

great product

Durable and the price is right. Plenty of room inside for customization.

D**T

Misses the mark by a few feet...

Back a few years ago, these off-brand plastic housings were adequate, and more importantly, they came with the requisite hardware to assemble properly. The quality has taken a HUGE hit and quite frankly, this is garbage. It doesn't come with proper screws to mount the top to the base. For some reason they do not fit through the base holes. The holes seem smaller in the plastic base than the top and the screws are not self-tapping, so the diameter is important.Something to keep in mind when ordering these types of cases. If I had more skill i suppose I could make my own, but these do save time, provided you get the right hardware. :)

A**D

Shallow Case not for micro switch based buttons

I have two of these models, the one shown here with the three smaller buttons and the other six button configuration.I used micro switches with are too tall for this case. But I did find a solution that worked, by using a nut on the top side of the button, it gives the extra clearance needed to close up the case.This will require a 2nd set of buttons -SJ@JX 10 PCS Arcade Game Push Buttons with Microswitch Logo X Y Start Select for PC MAME Raspberry Pi Blue https://www.amazon.com/dp/B07X3K5N3R/ref=cm_sw_r_cp_api_i_ZU36EbVBSX1M0Unless you can find the nuts sold by themselves.Overall- it would be awesome for this company to just make a deeper case or alternatively- you can make a wooden box and just use the acrylic top.

M**L

Arcade style fighting joystick case

Great little project box. Saved me a significant amount of time. Built a Dreamcast arcade fighting joystick. Plenty of room in the boy for the controller and the rumble pack.

C**D

Great overall buy

Only 2 annoyances. 1st is that the main holes are 30mm while most button kits appear to be 28mm (at least the ones I found and purchased). This was a small deal that was easily remedied with a few 1mm width 30mm diameter rubber o-rings. 2nd bigger annoyance is the difficulty in finding 24mm buttons for the 3 top holes. I had to buy a large drillbit to drill the Start hole wider to use with my kit, and I currently have 2 unused 24mm button holes. Other than this, kit is great.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
288 Lei

Duties & taxes incl.

Romaniastore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Acrylic Panel And Case Joystick Diy Set Kits Replacement Arcade | Desertcart Romania