ECCPP 2X 20mm HubCentric Wheel Spacer 5x112 for Mercedes Benz SLK250 12-14

Fit my 190e great and have had no issue out of them since installed. 200 miles driven at least.

Little snug but they are supposed to be. Sand the hub hole on wheels and a little wd 40 on spacer and wheel hub hole and fit perfect on my mercedes. Lug bolts seem cheap but you get what you pay for.

Included extended lug bolts snapped off into the hub while driving after being torqued to manufacture specifications. Shattered my wheel, cracked my rotor and caliper, bent a rear toe arm and damaged my quarter panel. Lucky this happened at slow speeds on a side street and not the highway or I might’ve not been able to write this review. Not impressed.

These were almost what I needed...... Spacers were high quality, well made and fitted my 1990 Mercedes Benz 500SL perfectly. They also shipped Same day in my area so was great to receive day of order. My only complaint was that although they are listed as "Seat Type: Ball Seat". They are actually Conical Seat Lug Bolts and not compatable with my (and most) MBs from this era. I ordered 20 actual ball seat bolts on Amazon and swapped them out after installation. Nota big deal for cost of the spacers but should be corrected IMO. DO NOT USE conical lugs hen you need ball seat lugs. There will not be much contact with surface of wheel and will cause issues or possibly loosen later.

Will fit a 1995 w202 c220 on the rear. Just make sure to get longer lug bolts. I got 60mm and it worked perfectly.

Works great on the rear wheels. Will not work at all on the front wheels of a 2005 CLK500. The fitment guide makes it look like only the AMG vehicles have an issue with the front wheels. The problem is the hub shaft on the front wheels is too deep. The lip on the spacer will not fit over the hub shaft which is about 35mm deep. On the rear wheel the hub is maybe 10mm so there is no interference with the spacer lip. You can see the problem in the pictures. I would give this 5 stars for the rear and 0 for the front - hence the 3 star rating. The lugs where longer than the 40mm lugs that I had and were chrome. I had no problems with them. The seller needs to make it more obvious that these will not fit the front of many (probably) all cars. I am guessing here but all the cars I have owned have had a substantial hub shaft on the front wheels. Look at the pictures and you will know what to look for. I'll add a picture of the rear hub later so you can see what that one looks like.

Lugs and spacers worked perfect on the rear of a 2003 C240. Stock, the rear wheels are inset vs the front and these spacers bring the rears out to the perfect stagger. Totally transformed the car and it looks amazing.

Item worked great but make sure you know the exact size you need. Quality is not the best but for the price it’s decent.

It fits onto the hub, but its not flush against the wheel hub. I have a chrysler crossfire which is the same car as A SLK320 in every mechanical way (suspension, wheel hub assembly, etc) It wobbles one side to the other. So I have to get machined now or buy a different one now.

Bolts were a little long but remedied that.