25pcs Compact Wire Conductor Connector- DIY Splicing into 2/3/4/6 Way Butt Terminal Connectors for 28-12 AWG
Description
- About this item
- ARBITRARY COMBINATION - Each wire connector is provided with 4 slots and 4 clasps on two sides, which can be flexibly assembled or disassembled into 2 , 3, 4, 6bit (way) butt connectors as needed. Don't worry about buying mismatched terminal connectors UNIVERSAL COMPATIBILITY - Connect any combination of solid, stranded, and flexible copper wires. Suit for 0.08-4 sqmm / 28-12 AWG. They work with most every gauge of normal household wiring: ceiling fans, sockets, switches, cars, speakers, lighting, electrical boxes, chandeliers, light switches, and and other wire connecting parts. EASY TO USE - Instead of traditional electrical tape and twist-type electrical butt connectors. Don't need more tools to connect wires, just using your hands. Push the orange levers to 90°and plug the wires (Strip off the housing of wires to 0.35-0.40inch and make sure that wires are plugged into the end) and then put the levers back. REUSABLE - These SPL-1 terminal connectors are reusable and creative wire nuts. when you need to change other wires, just flip the little lever up and pull out what you need and replace SAFE AND RELIABLE - BL wire connectors housing is made of nylon PA66 with high quality flame retardant insulation material, which has the advantages of long life, corrosion resistance, aging resistance, high pressure resistance, insulation and flame retardant.These butt connectors can effectively prevent electrical leakage. ›See more product details
Color:DIY Splicing connectors-25PCS These SPL-1 Butt Terminal Wire Connectors that can be flexibly assembled into 2/3/4/6 bit or any junction as needed. Each wire connector is provided with 4 slots and 4 clasps on two sides, which can be flexibly assembled or disassembled into 2 , 3, 4, 6 bit (way) butt connectors as needed. Don't worry about buying mismatched terminal connectors. Quick Splice Wire Connectors The tradition wires connection need to strip wire, entwist copper core wires, wrap the tape. This process is too tedious and time-consuming. The biggest hidden danger is unqualified operation, which leads to the problems of quality and security in the project. BUT, Use BL wire connectors to make it quick and simple, just need to flip the little lever up and plug the stripped cables into it , put the levers back. It can be achieved great connection. It have finished all the work in 3 seconds. Specification: Wire Cross section:0.08~4.0mm²(solid), 0.08~4mm²(stranded) wire size : 28-12 AWG Rated Voltage: 250V/600V Rated Current: 32A Shell Material: flame-retardant nylon PA66 Guide Strip: Electrolytic copper (Surface tin plating) Spring: Nickel chromium alloy steel Product Size: 39(L)*8(W)*14.5(H)mm How to use the wire nuts: 1.Push the orange levers to 90°. 2.Strip off the housing of wires to 0.35-0.40inch and make sure that wires are plugged into the end. 3. put the levers back. Package: 25pcs butt connectors (BL-SPL-1)
Reviews
B**U
Not for 12awg
Doesn't fit 12awg with The jacket. It fits the 12awg bare wire. So you have to strip the wires the entire insertable length of the connector and inevitably bare wire will be exposed on the outside of the connector. With the that being the case you'd assume those 12 gauge wires would fit very tight in there... Nope, the lever closes but with a small amount of pull the wires slip right out. Haven't tried 14awg.
S**H
Seem just as "snappy" as Wago Lever-Nuts but how well they snap together is hit or miss.
They're not an official product by the company that makes the similar product "Lever Nuts" (Wago) but the mechanism seems very comparable; however, sometimes they refuse to snap together properly. While snapping them together into segments of 5 pieces for storage I encountered this problem 3 times. I "fixed" it by changing the order of the pieces such that the issue was not apparent. Next time I might get the fixed 2/3-way versions.
B**.
They just didn’t work for me
They wouldn’t hold the wire well, and were difficult for me to use. They kept failing so it took twice as many pieces to connect four wires. Once I found pieces that would hold the wires, they would separate. When I turned on the power - no current to my lights.
M**E
Poor quality: six out of 25 defective.
The manufacturing quality is very poor and the product quality cannot be trusted. Out of a pack of 25, five missed a metal connection jaw and one had not entry hole for the wire on one of the sides.
J**S
Not suitable for 12 or 14 AWG
Slips right out. Incredibly unsafe. Tried with a handful of connectors in the batch and none held.
A**S
Dandy butt connectors
I bought these to use on a 3D printer upgrade for wiring up the nozzle heater, but I also decided to use them when I installed a new garage door opener. They're a bit large, but they hold securely and the bare part of the wire sits far inside the opening. Any number of the individual connectors can be ganged together into a single unit.
J**U
Things to improve
It has a circular access for the cable. Inside it changes its shape to square. This makes it extremely difficult to insert the cable, especially if its diameter is large.
R**N
will not hold wire in.
I don't know if this batch was defective or this is just crap? I tried different size wires. the hold on wires was loose and flimsy and comes out very easily.
Common Questions
Trustpilot
1 month ago
1 week ago
