Pressure Washer Pump KIT Replace Pump DEVILBISS VR2300- VR2522 All Front Pipe Connections Vertical Models Including EXCELL DEVILBISS Models VR2300-VR2500-VR2525 VR2400 VR2200 EXVRB2321 EXVRB2325

I got an old DEVILBISS VR2300 pressure washer that had been sitting unused for many years in the back of a barn. The engine cranked right up the first time I tried it, but the water pressure was almost non-existant. I went looking online for replacement parts and found that they aren't redily available since it's been over 10 years since these machines were built. Then I stumbled across this listing. The reviews were good, so I figured I'd give it try. The hardest part about installing this pump is getting the old OEM pump off of the machine. Once that was done this went on very easily. As soon as I cranked it up and squeezed the nozzle handle I couldn't believe the power of the water blast coming out of this now! This is a huge upgrade over the original pump that came on this. If you've got one of these old pressure washers sitting around and the engine still runs good, this pump upgrade will make your old pressure washer better than it was when it was new!

My >10 year old DeVilbiss pressure washer finally refused to give me high pressure, no matter what I did. It had been temperamental for years, but this time, it was done. After a little online research, I learned that the "unloader valve" in these machines is prone to failure (it gets stuck and prevents high pressure operation). I thought, no biggie, I'll just order a new valve. After a good amount of searching online, I discovered that the valve is no longer available. I was up for buying a whole new pressure washer - or so I thought.Enter World Wide Parts USA and this pressure washer pump kit! You get a new, oil-bath pump with its own oil reservoir, plus the fasteners needed to retrofit the pump to your old pressure washer. You'll need some basic mechanical ability to remove the old pump and swap in this new one, but if you're comfortable with turning wrenches, you should have no trouble. In my case, I found that I had to trim the plastic spacers provided so that I had enough bolt threads sticking through the engine flange for the nuts to grab on to. I also had to cut away some of the plastic belly pan on the pressure washer so that the inlet, outlet, and soap fittings were easily accessible. Once I finished the installation, I fired up the engine and was instantly treated to some kick-a** high pressure. I then used the pressure washer to clean my extra crusty/moldy/mossy deck (approx. 500 sq. ft., 6-9 hours of cleaning time), and the pump never missed a beat! In fact, my pressure washer now generates better high pressure than it did when it was brand new!If you have an old pressure washer that runs well but isn't making pressure, and it's one of the models this kit is compatible with, then I highly recommend you give this a try!

Pump works but hardware included does not fit vr2500 with 6.5 Briggs & Stratton engine. I had to go buy three 2 inch long 3/8 bolts and use three regular and one lock washer. Also, I did not receive the NEW AND IMPROVED VERSION with the hole to drain the oil. I guess I have to tilt the motor upside down to drain it in the future.

The lower plastic pan on my pressure washer needed to be seriously trimmed for fit and my replacement pressure hose is non-removable due to interference with the sheet metal lower engine mount/frame (a fitting may correct this). The pump is very powerful and really gets the job done. I ran it for about 18 hours so far, no issues once it was mounted.

I have a Delta DT2400CS pressure washer and the pump bearing went out. I like the Honda motor on this washer so I decided to replace the pump. This is the only pump I could find, that was actually in stock that said it was a replacement. It was packaged very well but upon opening it I had concerns since it looked nothing like the original. It literary is a perfect fit! came with all the bolts, nuts, washers, and lock washers. No instructions to speak of just a diagram of the motor, probably because it is that simple to "bolt" on. It works amazing! Thank you for saving my pressure washer!

Works great. Assembly very easy - only took about 20 minutes (not counting removal of old pump). All required parts (except for chemical siphon, which I took from the old pump) were in the package. Replaced the pump on Excell EXVRB2321 which had the bypass valve fail. Part no longer available.

Had to make small modification to the shroud for the water inlet,no big deal.The pump arrived earlier than expected.

I wanted to use this a lot before I reviewed it. Works great! Have had no trouble at all with it!. Installation not bad at all.