Pyle Car Mid Bass Speaker System, 5" 200W 4 Ohm Auto Mid-Bass Component Poly Woofer Audio Sound Speakers for Car Stereo, 30 Oz Magnet, 2.32” Mount Depth, Cone, High Temp Aluminum Voice Coil (Yellow)

I have a pair of AR-570 Powered Partner speakers that I've owned since new for almost 30 years. When one of the woofers developed a buzz, I spent weeks scouring the web for replacements, or looking for refoaming components. I stumbled across a very detailed post from, I believe, a Mr. Williams, who had the same problem, and he recommended these speakers as an easy-to-install replacement, and he included pictures and instructions. I bought two of them, replaced the failed AR woofer, and did the side-by-side AB tests, including running the input signal as mono. While I find the Pyle slightly brighter than the AR original, it was very close and I went ahead and installed the second one. The result, for the sum of $30 for the two speakers, is the resurrection to almost as-new condition of these powerful and friendly speakers. What a treat! I recommend without hesitation the use of these speakers as a replacement for the AR-570. Mr. Williams knew what he was talking about...

Ended up giving this to a buddy who had accidentally gotten a 10" sub to replace the factory one in his older Toyota. Turns out it was an 8". Sometimes you can't tell ppl anything 🤷🏼‍♂️. But we were both pleasantly surprised at how great it sounded! Built with a lot better quality than I expected. 🤘🤘🤘

Really nice, strong construction, sound good and are attractively priced. These are good value at the listed price but the listing which shows " $26.39 ($13.20 / Item)" is misleading because the price is actually $26.39 per item. The listing suggests a wildly attractive price or can cause you to under-order based on Amazon's automated deception. The level of penetration of AI into Amazon's systems should be tempered by allowing some means for legitimate complaints that is not itself mediated by the same flawed system. I would stop short of calling this false advertising because the printed price is actually unreasonable, but Amazon should do something about this (I see it on many products now that I look closely).

Clear sound

The Pyle speaker doesn't quite deserve 4 stars. It isn't quite as bad as 3 stars though, but that's what I have to give it after overcoming a manufacturing defect. My Logitech X540 5.1 surround system had a sub speaker on which the surround material deteriorated, making the bass sound horrible. I needed a replacement. The measurement between the screws was right at 5 inches, so I determined that I needed a 5 inch speaker. However, the box says it is a 5 1/4 inch speaker. Also, the original speaker is a 4 ohm speaker. Another speaker manufacturer claims their 5 1/4 speakers need a 120mm hole, and the hole in the Logitech subwoofer box is 116.87mm, so obviously a 5 1/4 inch speaker wouldn't fit without making the hole bigger. I ordered the Pyle 5", 4ohm speaker, to replace my original Logitech 4ohm speaker. The 4 holes on the Pyle speaker are actually narrower than the 8 holes on the original Logitech speaker, so I had to angle the screws to get it to work. Testing the Pyle speaker I had a buzzing sound, which I discovered to be one of the wires (tinsel leads) making contact with the spider (the tan coil in the picture). Pyle should have made the wire shorter, so it wouldn't be in constant contact with the spider. I had to unscrew the plastic piece mounting the connector terminals, and move it to the other side of the mount, to give the wires more distance from the spider. This 100% keeps the wire from contacting the spider, and also keeps it from contacting the cone. However, the speaker still sounds, I want to say, muddy. For the price of the speaker, I would say you get what you pay for. If I didn't need to fix the manufacturing defect, I would easily give it 4 stars, particularly since I can't hear the "muddy" any longer with the speaker on the floor behind the computer.

Ive been doing car audio installs for over a year and never have recommend this brand due to build and sound quality but i was really wanting to build a 3d printed box and this was the only midbass (woofer) i could find for a good price and fit nicely in the 3d printed box. And i most say after i hooked this up to a class T amp and ran some songs and movies through it for about a week to let the spider loosen up , this woofer has provided some shocking results! Its only running on a max of 50watts and it can move some air. Ive had it running for 3 hours straight on 50watts all the way turned up and the dust cap wasnt even warm, still wouldnt put this brand in any car audio installs but its for sure a great toy to have.

I purchased this speaker as a replacement in my 2014 Audi a6 for a mid range driver. This was the only speaker I could find that I could reuse the factory mount to secure the speaker to the in-door ported box. Upon opening the box, I noticed that the woofer had glue all over the woofer material. The bolting holes were between the ballast and the top cone. I knew than that this was a cheap speaker. Upon installing, the speaker started to distort and rip apart in two (2) days time. See pictures below. I’m really disappointed and will contact Pyle directly.

I got these to finish off my wife's system in her mini van. It has 3.5 pyle in console ,4 12" pyle and now I replaced the factory dash speakers with these 5" pyles and it came to life . Real crystal clear sound you won't be disappointed.

Mon fils a un projet de bricolage avec une enceinte, celle ci est très bien il en est satisfait le son est correct

جوده وسعر وسرعه في التوصيل 👍🏻

Super bien el sonido! Buena construcción! Me soprende la profundidad del bass para ser tan pequeña

Fitted 2 of these in car front door, really good sound quality.more bass in music now. Really happy with purchase and price. Will recommend a buy.

Buen producto buen sonido