HDMI to Component Converter with Scaler Function, Aluminum 1080P HDMI to YPbPr Converter

Wanted a YPbPr+L/R converter to connect my Sony UPB-X800M2 DVD/Blu-Ray HDMI output to my old Sony FD Trinitron KV-27FS12 CRT color TV. To do that, I needed a converter that could downscale to 480i. I saw a YouTube demo of the EASYCEL and wasn't too impressed, but looked like it might work. I plugged everything in, turned on my TV and DVD, and started clicking the resolution button, until after about 5 or 6 clicks, a home screen finally appeared on my TV. At that point I put in a disk and hoped for the best. It was AMAZING!!! Incredibly crystal clear image and audio! The EASYCEL is well-made, easy to use, high quality, at a great price. Comes with power supply but needed to purchase the audio/video cables separately. If you have a similar need to connect and convert your high tech video player to a low tech TV, you might try the EASYCEL. I couldn't be more satisfied with the results, performance, and quality, and highly recommend this product!

I'm using this converter to connect my Raspberry Pi 400 to my CRT and for that purpose it works great. I'm pleased with the range of input resolutions and frame rates it supports, which is more than advertised. I'm using it with an input resolution of 800x600/60p to get a bit more screen real estate. It scales it to my TV's native 480i with no issues. Picture quality is excellent; no complaints there. Only thing I wish it had was an aspect ratio/zoom control for use with HD sources on an SD set or vice versa. If you have a 16:9 source on a 4:3 TV, the picture will be stretched vertically to fit the screen. If you wanted that, you would have to get a GBS-C or something similar. There is another adapter going for the same price that does have zoom capability but half the reviews were for a completely different product. I wish Amazon would crack down on that. Other reviewers have complained about latency, but since my use case is SD media consumption, I've not had an issue. It is worth noting that most modern TVs have a couple frames worth of input lag anyway. I have seen some concerns about reliability in other reviews; will update the review if/when it fails.

I purchased this converter after discovering that Verizon's upgraded Fios set top box was not going to work with our existing TV setup. The new Fios box only has an HDMI output cable but our existing setup uses component video and RCA cables for surround sound and a whole house music system. The converter is self-explanatory in terms of setup. The HDMI comes in and the component and RCA cables go out to whatever equipment is hooked up using these cables. There is also a short power cord to plug in. I was thrilled to find out that the converter works, which allows us to migrate to the latest Fios box (Verizon tech suggested this solution though in general the company has been a nightmare to work with on this upgrade). Make sure you buy the right product: this converts from HDMI to component, not vice versa. Given that this converter allows us to use Fios STB with our existing AV setup , I think the price is reasonable. We'll see how long it lasts.

I bought this because it advertised 480p and I wanted a cable to connect a PC to a Trinitron TV. I am unable to get my GPU to output 480p (640x480), the lowest is 600p (800x600). However, the converter reads the input signal as 1080p (1920x1080), no matter what. And outputs only 16:9 resolutions. So, 480p is 720x480. But… my TV reads this signal as a 4:3 signal and compresses the image horizontally. Fortunately, I was able to correct this in my GPU drivers (AMD) by enabling GPU scaling and setting it to not maintain aspect ration. I’m not positive, but I think this means my GPU outputs a stretched 800x600 output over a1080p signal. It ends up looking pretty good on the TV. The best resolution is 800x600. I thought maybe higher resolutions might benefit from downsampling, but 1024p and up has a lot of artifacts. But, you will need to manipulate the signal to get 4:3 to display properly. There is one final criticism: the unit has poor electrical shielding from its own power supply. It has a light snow that other inputs do not carry. Even worse, this interference is great enough that it affects other signals. If I am using the adjacent component input, it picks up the electric noise from this converter. This means I have to unplug it when using other connections. For the price, I can live with a slightly dirty signal. However, it would be nice to have a power switch, so it would be more convenient to disable it. Otherwise it works well for $30-ish. I haven’t tested any delay. I don’t specifically intend to use this connection for gaming, mostly watching older 4x3 content. But, I will test it in a couple days. My TV is a HighScan variant, which means it does super sampling which can add14-31ms of latency. There is a lot of conflicting information about when this is enabled in my TV. From my own testing, it does not apply HighScan to 480p signals over component and there is practically no latency. All my 6th generation consoles are snappy and responsive, noticeably when compared to newer LCD and OLED TVs; button presses are instantaneous. If there is any delay over this connection, it won’t be from the TV. I will update when I try. For what you pay, you can’t be disappointed, but you need to be aware of its draw-backs before you decide to use this particular unit.

I gave this device a '5-star' rating due to its feature set vs. price especially when compared to other available options at > $200. It's not perfect but it does work as advertised. Setup is very straightforward and can be completed in 10-15 minutes. My application was to connect a 1080p HDMI output from Roku Express to 2004 vintage rear-projection television that supports only coaxial, s-video, and component input. To get resolution greater than 480i, I had to use the component input that supports supports 480i/720i/1080i. I used the HDMI cable that came with the Roku Express and connected it to the EASYCEL converter input. I then connected component outputs to the corresponding RGB video and R/L audio inputs on the television. Plugged into AC power strip, turned on TV, and the pressed the 'Resolution' pushbutton. When my television supported the output resolution from the converter, the Roku output and current resolution mode being generated by the converter was displayed on the TV screen. I kept pressing the 'Resolution' button (at 3-4 second intervals) until the TV screen displayed maximum resolution supported by my television (1080p-to-1080i). It's only been running for 3 days, but overall I am very pleased. The picture quality is good (not great) but better than expected for this price point. The video output is very comparable to the DirecTV converter I previously used with this TV. The converter package is small and easily tucked into any small area near the television. It generates very little heat, and my only negative in regards to the packaging is the converter has a very bright red "power' when active. That means you must hide hide the converter from line of sight while watching television.

Garbage, only outputs 16:9 even when the input is 4:3, output signal randomly cuts out at times, tons of latency, screen tearing, and flickering. Totally worthless.

I have an old Sony 38' Trinitron with a 4:3 aspect ratio. Since I cut my ties with cable, I went with an Amazon Firestick. Of course there is no HDMI input on the TV, only DVI, Component, and Composite, so I needed a converter to convert the Firestick HDMI output to Component. I chose this one because it seemed to have the best reviews out of all of them ... none of them are really good. The first one lasted a year, the second one I had to return because the on-screen-display wouldn't turn off after a few seconds, and this one seems to be working so far, although it's only a few days old. It works fine ... we'll see for how long. I can get a 4:3 aspect ratio by toggling the resolution button, a good picture and it was easy to setup. The only problem, which is unavoidable, is that all of these converters are made in China and you get the unreliability that you've come to expect. Isn't anything made in America anymore??? I've given it a 5 star review, but that may change depending on how long this one lasts.

This has worked passably for me. I have an old CRT and use it to play emulated console games(mostly games I couldn't feasibly obtain, like English fan translations). This device works well for this purpose in some ways: the color is good, it sends a good signal, and is extremely simple to operate. My biggest complaint is that it doesn't take in a 4:3 image and output a 4:3 image. If I set my laptop to 800:600, the image will be badly cropped by the time it gets to the CRT. Similarly for other resolutions. The only way around this I've found is to go into the Nvidia control panel and set the resolution to exactly 712x558. Works every time. As you can imagine, this impacts the picture clarity. I also have some issues with small text flickering, which are probably a separate issue from the resolution. Overall, it works, and I haven't seen a better solution yet, just be aware that it has some issues.

Tenía duda que pudiera escalar a señal 480i (interlazado) para TV CRT. Estoy utilizando un Google ChromeCast Full HD y me entrega una señal de salida de 1440x480i en un CRT Sony Trinitron 29", y es excepcional la calidad eb brillo, contraste y principalmente en color. Hice algunos ajustes en las configuraciones de servicio de mi televisor, y he logrado casi un aspect ratio 4:3 nativo.

Funcionó perfecto para NES mini que era el objetivo, aunque también se probó con una ps3 con sus juegos de ps2, eso sí , el monitor o crt que usen debe aceptar 480i que es lo menos que tiene de salida este dispositivo