Spigen Tough Armor [Extreme Protection Tech] Designed for Samsung Galaxy S20 Plus Case (2020) - Black

Like the case. Buttons work better than the otterbox I had on it previously. Good fit

If you're looking for a Durable case without a ton of extra weight,look no further.This is well made, durable, and WILL protect your phone from standard drops,HOWEVER with the slimmer build, this will likely not hold up as well to crazy high drops,Or repeated heavy drops, I'll explain more below, but all you need to know, is it will work fine for most people.It's tested for 26 drops at 48in, and I believe it! full height drops should be fine too.However I was a little disappointed by a few things, first the volume up and down buttons are pretty much flush with the side of the case, with only a very small divider, so it's VERY hard to tell what you have your finger on.Also the kickstand is really flimsy, they say you can pop it back in if it falls out, but it does not feel very solid, and need to be fully extended to support your phone.Also case is advertised to have 'raised edges' to keep the screen protected, but only two parts are raised the the top and bottom sides.Both the left and right sides are pretty much flush with the screen.Sure this will offer 'some' protection, as all all four coroners have a raised section, but they're only raised by about 1-2mm, so with heavy drops (may) compress that much, and cause impact to the screen)Also the very small lift, and no lift on side means it's much easier for your screen to get scratched form normal use.My screen protector got some noticeable scratches after a few days of use, and zero drops.And finally as cool as the foam lining is, it only covers a few spots on the back of the case, not the sides or front.So it would only really help with protect from impact when your phone falls flat.If your phone falls on a corner, of face first, the force would hit your screen long before it touches any foam.No reinforced edges either, they do have a little cutout 'air cushion' but the corners of the case still contact the corners of your phone, so I'm not sure how much that would help.Also while this design seems to use a multi-layer design, the plastic is extremely thin, and the rubber is pretty flexible, (again to keep the size down) and they both don't cover the full phone.The multiple layers may help disperse the shock a little, but I still think I prefer the design rugged cases use where they have a dedicated liner for your phone, and an outer shell.----Conclusion:----Yeah, I ragged on the design a lot, but again, for like 99% of the population this case will be MORE than enough,it will handle daily drops with ease, and will keep your phone safe.Is it a super-durable rugged case? no, but it's not trying to be,and for some people the the less lower bulk and lighter weight will be more than enough to make up for the fact that they can't throw their phone from the roof. :)* Disclaimer: I'm not a professional, and I don't do drop tests, this is all speculation.

Amazing case and the support in the back so much needed.

So I really love this case. I had it for the S8 for 3 years before getting the S20+ and instantly buying this case again. I have yet to drop my S20+ but I had dropped my S8 many times over the years from hip height onto solid, wood floring. The case protected it each time. I anticipate this case to do just as well on it's end. I do think that the S20 has notably handled drop tests worse than the S8. That is to say that I've seen a few people complain about this case not protecting their phone and I guess my comment is just that it's likely less of an issue with this case and more of an issue with the S20.Anyway, I really really enjoy the case and the kickstand. My one issue with the S20 version of this case is that the kickstand makes the phone face a way so that the volume buttons are positioned down against the surface the phone is on. So to change the volume I have to pick up the phone. I would've liked to see the kickstand moved to the other side so that volume could be changed while the kickstand was being used. That's how it worked with the S8 (since the volume buttons were on the opposite side). So kind of disappointed they copied the case without thinking about the functionality.Otherwise, I've had no issues with it and really like it.

Update 1 year and 6 months used.Case has held up well. The hard plastic has starting to crack. Cracking around the top of the kick stand that was pressed closed permanently (so playing with it stopped). The thin plastic in-between the top volume button and the camera cut out broke. Got light scratches on the back of the case but nothing to where you can't still use it.Used a cut off wheel on a dremel tool to cut a small slot in-between the volume up and volume down buttons on this case so you can feel which button you are on while not looking. Else it just feels smooth and there is no way to tell.This case has a raised bevel on the top and bottom so if your phone lands face down there is less of a chance the screen will take damage.Just ordered a 2nd so when and if this one fails for any reason I have another.Original Review:Do sheet metal fabrication and a lot of outside work. This case has held up well, it makes the phone wayyyy easier to hold on to, and you get the little kick stand thing to play with in your pocket whenever you feel like it.You can wirelessly charge through this case.Sometimes you might have to take the case off to clean around the camera.Power button and volume buttons work well. Took me a bit to get used to because the volume buttons are pretty hard to feel but the power button is easy to feel. Done some things to this case/phone that I thought it would have broken, as we all have, and it didn't break. Couldn't use my phone without this case tbh.

I've trusted and used this brand "SPIGEN" with all my previous phones I've owned, and this 360° case has been both superior in protection and performance. It's been highly rated and the multiple reviews speak for themselves. It has outperformed many other brands with It's design and quality materials used in it development. (even comparing it with the Otter box type..) The only problem I've ever encountered is when I'm securing it to my mobile magnetic suction mount in my vehicle. (Truck) I'm Currently exploring other options for mounting and securing my device. Other than that, I highly recommended as a first choice for phone case protection.