Spigen iPhone 5s Screen Protector Tempered Glass / 2 Pack/Case Friendly for iPhone 5s/se/5c/5

SPIGEN SGP iPhone 5S / 5C / 5 Screen Protector Glass Slim [GLAS.tR SLIM] (0.4mm) Rounded Edges Glass Screen Protector Anti Chip for the NEW iPhone 5S and iPhone 5C and iPhone 5 (SGP10111) I bought this to go with my Spigen Tough Armor case, and tried to time it so my iPhone 5s, case, and screen protector would arrive on the same day. It was well worth it. The phone was sealed and I had every intent to keep it that way until the GLAS.tR SLIM was installed. I took my time wiping the screen down with a light source at an angle until I was satisfied there were no dust or dirt particles. Once the protector was set on the iPhone, at an angle, I let it settle on the screen under its own weight before applying any pressure with the squeegee. 2 bubbles on both sides of the home button were evident but with a little lifting to clear the bubbles and taking my time I managed to work them out. Surprisingly, the install was a lot easier and simpler than most the reviews I read (and I read quite a few). My 2 main concerns were bubbles, and trapped particulates, and surprisingly neither occurred. The end result is absolutely stunning. I actually take pride in wiping down my phone every now and then just to keep it looking sleek. I personally opted out of the home button stickers, and in all honesty, I don't even see the point why you would put on a home button sticker, wouldn't that interfere with the fingerprint recognition? I think it looks sexy without it. And as stated I also use the Spigen Tough Armor case with my GLAS.tR and the fit is not an issue at all. The case and GLASS.tR fit seemlessly and beautifully. *Update: Been using the Glas.tR on my iPhone 5s for a month now. Still no bubbles and surprisingly the oleophobic coating has held up. That's the thin layer coating on the surface that keeps oils from staining and smudging. I had expected it to wear off but it's been like this since day one. I wish they'd spray this stuff on my monitors and television screens lol. Couple things I wanted to mention. This glass in thick, I've seen some of the plastic screen covers my friends use on their Galaxy's and iPhones and this is definitely good quality. Also after doing some research if your debating the Glas.t or the Glas.tR my recommendation is pay the extra for the tR. I was initially confused about the rounded edges but it makes a difference. Not just aesthetics, but it keeps the glass from chipping on the edges. On top of that, without a phone cover or TPU case it feels nice running your fingers on a edge and even with a phone cover my case wraps around it very nicely. Well worth the extra $10.

Yes, it's expensive, but it's the last screen protector you will ever have to buy for your iPhone 5. And it works as advertised. No scratches, no blemishes, hard as rock, no greasy fingerprints, yet allows the full radiance of the iPhone display to shine through. I purchased this product along with the Spigen SGP SGP10365 Slim Armor S Case (also a 5-star recommendation) and the two go particularly well together. The glass protector sticks fast to the iPhone screen and rests slightly lower than the lip of the case. And I will admit to be absolutely the worst at installing plastic screen protectors and usually have gone through one or two before getting it right on my third try. So I was a little apprehensive about installing this. I spoke to customer support to ask about using the case as an alignment tool but they recommended removing the case first and then cleaning the screen thoroughly and washing hands. I live in Costa Rica so dust and gecko poop are always dropping through the air but I picked a calm day and did the job in my house at my desk under a bright light. Turn off the iPhone. I Used the supplied alcohol swab to thoroughly clean the screen and dried with the micro fiber cloth. Then just blew off any visible dust particles and tried to work fast. Started at the bottom and lined up the home button perfectly and then with fingers from both hands slowly lowered the protector lengthwise across the phone, making minor adjustments with my fingers to ensure the sides were aligned. To my delight, the screen lined up absolutely perfectly. Then I watched the adhesive spread across the screen. There were two large bubbles at either end that were easily worked out with the little card that is supplied (wrap the micro fiber cloth around it). Near the bottom, I used my thumbs to push out the remaining air bubbles. Don't press too hard. And don't forget that there is another protective piece on the top that you remove after you have squeezed out all the imperfections. You will be stunned when you remove it and turn on the phone. The clarity of the screen is superb. And the feel. So much better than plastic protectors. Like a clear coating of ice. Smooth on the fingers. No dragging or sticking. And forget the tacky home button covers they provide. You won't need them. Even pressing the home button, you are hard pressed to realize there is anything covering the screen. Then installing my Spigen case, I was happy to see that the case lip just met the edges of the screen protector forming an almost perfect seal to the screen. I might note that Amazon just dropped the price on this protector so it is a particularly good buy.

Reçu en un jour ouvré (merci Amazon qui tient ses délais comme d'habitude:)). La taille s'adapte parfaitement à mon iPhone 5s. Pas de problème pour mettre la protection en verre trempée puisqu'une petite lingette hydroalcoolique est fournie avec le produit pour enlever les poussières et les traces plus résistantes. Une seconde lingette est aussi fournie pour essuyer le tout. De cette façon, lorsque l'on pose la protection sur la vitre du portable, c'est niquel. En ce qui concerne la pose en elle-même, pas de problème non plus puisque il y a un système de languette à décoller l'une après l'autre. La vitre en elle-même, est très résistante, je l'ai depuis 1 semaine et pour l'instant ça protège aussi bien des micro rayures (quand on l'a dans la poche etc) que des chocs. J'avais un peu peur en voyant certains commentaires que la vitre retienne les traces de doigts ou que ça fasse un aspect "dégueulasse" avec plein de petites poussières qui s'incrustent. Mais pas du tout donc je valide ce produit pour son rapport qualité/prix.

Best screen protector available for the 5S. I've had it installed on my phone for several months, and the quality of the protector has shown its worth. Fits great, looks great, great coverage. Good resistance to fingerprints. Screen looks just as good as without a screen protector on. May be more expensive than other options, but its worth it, in my opinion.

Ragazzi, una pellicola fantastica! Il vetro è rifinito in maniera eccellente, e la dotazione di accessori è veramente utilissima. Nella confezione troviamo: - due pellicole di vetro, imbustate singolarmente - due confezioni di salviette "wet & dry" - un set di adesivi - un panno pulizia Allora, prima di tutto un consiglio personale: pulite bene l'area di lavoro, per evitare che polvere o sporco finiscano sul telefono. Fatto questo, aprite la bustina contrassegnata con il numero 1 (wet - bagnata), e usatela per pulire a fondo lo schermo. Ora la bustina numero 2 (dry - asciutta) per rifinire e asciugare bene il tutto. Se necessario, infine, potete usare il panno grigio per dare un'ultima passata. Ora il passaggio più importante: staccate l'adesivo blu con scritto "dust-absorber" e usatelo per tamponare lo schermo. In pratica, attaccatelo e staccatelo più volte passando sull'intera area dello schermo, in questo modo catturerete anche i granelli di polvere più piccoli e difficili da individuare ad occhio nudo. Sfilate quindi il vetro dalla sua custodia e togliete la pellicola di protezione, ovvero quella a cui è attaccata un'apposita linguetta con scritto "Back - remove". In questo modo scoprirete la parte che andrà appoggiata sul telefono. Vi suggerisco di posizionare il telefono in orizzontale, in modo da avere un colpo d'occhio migliore. Ora usando le due linguette tonde ai lati della pellicola, centratela sullo schermo e adagiatela fino a farla aderire. Essendo rigida, non sarà necessario premere o spingere per eliminare l'aria, in quanto la pellicola aderirà perfettamente da sola. Se il risultato vi soddisfa, togliete la protezione superiore ed il gioco è fatto! Il risultato è eccellente, il display non perde di luminosità o resa nei colori, il touch è sensibile esattamente come prima e lo spessore aggiuntivo non infastidisce minimamente...anzi, se proprio devo dirla tutta, il "buco" intorno al tasto home crea un leggero bordino che aiuta (secondo me) a centrare meglio il dito sul lettore d'impronte. Anche la telecamera frontale, pur coperta dal vetro, non perde minimamente di risoluzione o altro. Che altro dire, prodotto straconsigliato!!!

2017年に購入。４年間使用し、先日、iphoneを画面下にして落下させてしまいました。ガラスフィルムにはまっすぐに線が入りましたが、触っても支障ないレベル。そのままでも問題ありませんでしたが、もう１枚残っていたので、早速貼り直ししました。貼った直後は、画面真ん中に大きな気泡が残って、すごくショックだったのですが、朝起きたら、綺麗に消えていました（説明書にも記載されていました）。画面保護としての性能、４年使っても問題ない耐久性、気泡の残らない貼りやすさ、全てにおいて大変優れたガラスフィルムです。

Ich habe die Schutzfolie mit dem Spigen Neo Hybrid Metal Slate Case für mein iPhone 5 SE bestellt. Ich habe noch nie eine Folie so einfach auf ein Smartphone befestigt. Das Auftragen der Folie war super simpel und dank der Hilfslaschen noch einfacher als ich es mir vorgestellt habe. Die Folie hält wie versprochen, sitzt bombenfest, und verrutscht nicht. Die Panzerglasfolie ist leicht an den Seiten abgerundet damit sich der Übergang besser anfühlt. Wenn sie richtig aufgetragen wird, bilden sich auch keine Blasen. Selbst wenn dies der Fall sein sollte (kleine Blasen) hält SPIGEN wie versprochen ihr Wort, denn diese sind nach ca. 24 Std. einfach weg!!! Die Stärke von 3mm ist optimal und es fällt kaum auf das sich eine Schutzfolie auf dem Handy befindet. Die Folie ist nun schon eine Weile auf meinem Handy (in Verbindung mit dem Spigen SGP10360 Neo Hybrid Metal Slate Case) und es sind keinerlei Kratzer oder Luftblasen zu erkennen. Ich bin SEHR zufrieden obwohl ich anfangs meine Bedenken hatte, da solche Panzerglasfolien das Display nicht immer richtig schützen sollen. Bei Bekannten von mir welche ihre Folie von irgendwelchen "No Name" - Herstellern gekauft haben, sind nach Stößen / Herunterfallen große Risse auf dem Display entstanden jedoch ihre Schutzfolie heil geblieben. Bei dieser Folie von SPIGEN bezweifle ich ähnliche Ärgernisse und kann sie beruhigt weiter empfehlen.