Leak Saver Direct Inject Ultimate 3-Pack | 3-in-1 AC Refrigerant Leak Sealer | with UV Dye & Moisture Remover | for Most HVAC Systems Up to 5 Tons - Professional AC Leak Sealer - AC Stop Leak

This product saved my 2 heat pump units. I was looking at a 25k replacement cost and this product was able to stop both leaks I had and my unit has been running. Great the last 6 months.

Works as advertised. Not sure if it will require another treatment down the road. That’s why I bought the pack.

I think I did over 10 hours of pure, uninterrupted research to find out whether this would clog and destroy my AC system or magically repair it. Here's what I found. For context, I have a newer type of heat pump that uses R-410a (Bosch BOVA36HDN1M120G) paired with an old high-velocity duct system (Unico MC3642HX) *Will this destroy my AC system? What various sources report is that organosilane, polymer-free leak sealants (like this one) are generally safe for new model heat pumps and will not "slug" or otherwise destroy sensitive components in modern machines. Supposedly, this is because they will only react and harden when exposed to the pressure and oxygen variations associated with getting outside of the closed refrigerant loop of your system (i.e., when exposed to an actual hole). Leak sealants (generally) apparently got a very bad rap in the 2000s because they used to be polymer-based which, when introduced into systems like mine, immediately caused problems with sensitive (apparently "microscopic") valves and whatnot that modern heat pumps use to regulate the flow of refrigerant. They can also apparently cause problems when other contaminants like air or water have already entered the system, causing the leak sealant to trigger earlier within the refrigerant line instead of at the leak site, resulting in issues when the refrigerant flow constricts. I agonized about what to do because I had a leak in my system that took 2 years to allow enough refrigerant to escape to make my heat pump lock out (what most would describe as a micro leak). For reference, in my area (a HCOL suburb), multiple HVAC companies said that their go-to in my situation would be to pull all the refrigerant out, separate my system into indoor coil, piping and outdoor unit, and then do a nitrogen test to find the leak. It apparently would take about half a day to do this process, and I was quoted about $200/hr of labor during high-season (December). And that was to find the leak only. Additional costs would then be tacked on for repair which, by the way, if you have an R-410a system like mine, may not be viable if the leak is in your coil because R-410a is being phased out. And even more costs would come into play if the leak wasn't somewhere easily accessible, like inside walls or ceilings. There are some products that apparently can electronically detect leaks, but it was a chore to get HVAC techs (from multiple companies) to even mention this option. I imagine there's some self-interest at play there, but those leak detectors are also available online if you are inclined to try them. Putting all that together, I asked one of the HVAC workers visiting me to give his real thoughts on the sealant. Off the record, he said the official line is that it's not recommended (injecting anything into your refrigerant line will immediately void any warranties you might have on your unit), but that the end result would either a fix or nothing. He said he would advise just refilling periodically, and getting a can of R-410a somewhere (since these are being phased out, with the expectation that prices go up over time, like they did for R-22). I decided to trust in internet research and go for it, and had the tech add in the sealant for me (I saw some videos online claiming that this process was straightforward, but also multiple videos where people added this into the wrong pressure line, resulting in it exploding in their hands, or adding it with too much or too little air). I then ran the system in cold mode for 3 hours, and then ran it at a moderate heating mode constantly since then. The system is still working fine. I don't know if the leak sealant has worked or not, but the system itself has been fine for about a month now. If you decide to take the risk that I did, I suggest you check the SDS sheet for the product you choose. The one for this one is available here (https://www.leaksavers.com/apps/help-center) under the "Leak Saver Installation Help" category, and make sure you are also getting a "polymer-free" organosilane leak sealant as opposed to one of the older polymer-based sealants still floating around (especially at big box stores). Otherwise, good luck. Ultimately, I think this is one of those things that you just have to take a leap of faith on, because all reputable HVAC companies will give you the same party line about this not being an approved product, and all technicians will generally repeat that mantra. The only thing I can say is that it did not immediately kill my system (parts mentioned above).

Quick update - this seller did a great job from a customer service perspective. They made the situation right. It is great to know that there are still products and manufacturers that guarantee your satisfaction with their products! What a bummer! I've been a big fan of Leak Saver products until this one. I've used the Leak Savor Direct Inject UV Dye and Leak Sealer on 4 heat pumps over the past 5 years had had 50/50 mixed results. Now that I've used this product on another older heat pump at a second home, I have to say that I'm no longer sold this stuff works. I also have to say that I have "suffered" silently as I have had several issues with the product including a multipack that had broken "pipes" of the leak sealant in the bag to now this "Ultimate 3-in-1" actually making my leak much worse. The problem with the multipacks are that the contents are hidden until you open them. Unless you are going to do that before the return period you don't know if you have a damaged and/or defective product. In the latter case, this Ultimate formulation took me from having a leak that lasted a month before dropping out the pressure switch to a leak that was significantly bad enough that it only took 3 days for that to happen. I cannot tell if it gummed up the TXV to make it worse or what but suffice to say my hail mary didn't work and I'm now having to replace a heat pump.

This product was easy to use. I also ordered the hose used to inject the Leak Saver and it was simple to use which made it easy for me. My system has/had a very small leak. It usually takes two summers to need refrigerant. I won’t know until 2028 if the small leak was repaired by Leak Saver. I have faith that it has already worked though because the unit seems to be working so much better. It’s cooler in the house and it’s been very very hot and humid here lately.

UPDATE: this week the fridge stopped working again, loss of freon. So this product did not fix the very slow leak as I was hoping it would, so have to give it one star now. For the price, this is not a good value. The expensive brass fittings on each end are not reusable, and obviously jack the price up. The leak I’m trying to fix is in a fridge, and is very slow (2 to 3 months), and I’d expect this product would work, yet it doesn’t. And have not been able to find the actual leak using a black light to reveal the UV dye… frustrating!! Original, initial review: I just put this in today for my Samsung side by side. I did get the leakstop into the fridge today, I’ll come back in a few weeks to report on efficacy. 1) package came with no instructions whatsoever… just the stop leak tube in a sealed package, in a branded slightly larger package… I went online for the instructions. 2) Installing was challenging. There’s a valve at both ends, and neither activated. The input from the manifold has Schrader valve, but my hose/gauge does not have the fitting to activate it. 3) The valve on the other end would not activate when screwed into a bullet piercing valve. I had to unscrew the first Schrader valve completely, connecting the gauge, the contents ended up in the hose, so the hose was the intermediate step… I ended up not using the supplied fancy brass fittings on a mini hose, though not intentionally, simply the valves were not working for me. 4) at $46 I wonder how much was due to the nice knurled brass fittings? Is the compound available to refill the tube? Is there a recycling program? 5) the fluid tube is very stiff… this became a problem as I had installed the bullet valve pointing straight up last week when I was doing the initial refill with r134a…. So there was not enough clearance between valve and chassis, making attaching challenging due to the stiffness… Wondering what I can do with these nice fittings, LOL…

My home's A/C had a leak that I eventually found in the evaporator. Over a two day period the system would lose about 4 pounds of freon. I added the leak saver then recharged the system. This was 2 weeks ago and the leak appears to be sealed. I have an electronic freon detector that originally detected the leak location. After adding leak seal the detector did not detect a leak even on the highest sensitivity setting.

Been in my wife’s jeep for 3 weeks. No issues yet an no Uv dye found. So I will definitely be purchasing more of this in the future. 👍

This dealer is very easy to use and hook up. You do not need any special tools.

Did the job, been 4 months and the AC is still working great after it was added with the freon. Normally the freon would leak out after just a few weeks. This is at our condo in Punta Cana where it’s 26 to 34 Celsius during our winter months there.

Facile à utiliser

Easy to use , straight forward application

I would suggest that if you’re considering paying this much for a product, you have a more serious issue and need to replace some parts. Did not seal the leak in my vehicle, wound up finding and repairing the leaking part so this was a waste of time and money.