Elite Blaster Rack - Storage for up to Six Blasters, Including Shelving and Drawers Accessories, Orange and Black - Amazon Exclusive

I absolutely love these blaster storage racks. I've put several together in the past and they've all been wonderful. I haven't really been a fan of the pegboard look, so these are very unique and easy for me personally, and I feel like they look much better. They are very sturdy, but it can be a little difficult putting together admittedly. But once you do, it is well worth it. You ABSOLUTELY have to make sure the parts are snapping into place properly, and it does take some effort sometimes, and pay very careful attention to the instructions, otherwise you are going to get a loose and wobbly storage rack. But when it's done right, it's absolutely wonderful. It can hold a ton of blasters without feeling like it is going to fall apart or feeling rickety. I additionally love the fact that it's got the hangers on the sides as well, so you can store even more blasters on there, as well as the bin on the bottom for accessories or darts or whatever. All in all, it's very modular, looks awesome, sturdy, and a trustworthy product, but it has to be put together properly, and it can take some oomph to do so. Highly recommended!

First of all, you’re paying 70 dollars for 14 cents of plastic. Next, most pieces don’t fit together nicely during assembly. It requires way more force than it should. Surprisingly, only one tab snapped off during assembly. Finally, quality control and customer service are complete failures. Mine was missing the long bar that goes across the front, but had an extra smaller piece included (see photo). Clearly a mess up from the factory. I took a photo and completed assembly, naively thinking Hasbro would simply send me a replacement. I was wrong. After navigating their archaic website I used the chat bot to contact the company. First attempt went nowhere because the webpage crashed when I hit send. Second attempt resulted in a response asking me for ridiculous amounts of information, including numbers from the box that had already been thrown out. I provided as much info as I could, only to be told that I needed to contact a different company. After repeating the first steps on an equally garbage website, I was told that the only resolution is Amazon issuing a refund or replacement. Well, it’s already assembled, and disassembly would definitely result in most ill-fitting pieces snapping off, which opens the door for Amazon to feel I was trying to scam them. On my way to the local witch doctor right now, to have her cast a spell that gives every person involved with the making of this product incurable athlete’s foot.

I was skeptical about getting this for my 7 year old after reading a lot of reviews about how it doesn't stay together and falls apart. It's because they didn't assemble it correctly. The pieces snap into place, with A LOT of force I might add, and do not budge. This has been great for his giant nerf collection including a ton of HUGE guns. I even asked if he was able to take it upstairs to his room while I grabbed a bunch of other stuff for him. He hit every stair on his way up with the rack and nothing came undone. If you don't push the pieces in all the way, yes it will fall apart continuously. I used something to hammer the pieces into place while holding the part sturdy so it didn't snap. I had no issues getting everything into place after I realized it took some gentle brute force.

This is a decent rack and functionally, I think it will suit our needs fine. As far as design and assembly are concerned, this was a giant mess. I have a background in engineering (although not materials or structural in nature), and so I normally approach self assembly items with bad reviews with a grain of salt. I can usually find my way around some of the issues and concerns people encounter. As for this item, all the complaints are warranted. I didn't have much in the way of problems with directions. They were mostly clear. But the design itself was bad and the materials were concerning. Tolerances were bad. Fitting the tabs in the slots was a painfully frustrating process. The tabs were mostly angled with a lip on one side that would catch and lock when fully inserted into the slot. But many of them were hard to get all the way in. I feel it was a miracle I did not break the material trying. Some of them had lips facing the wrong way, so they did not effectively lock in place. The worst was connecting the base plate to the vertical frame piece that separates the rack from the shelves / drawer. The base plate had longer tabs with longer lips that would rest in a grove on the bottom of the divider frame piece. This design was ok, but the lip was too long to fit through the slot that you have to slide it into to connect them. And you could not effectively angle the pieces to get the tab in that way. Ultimately you have to modify the materials and either make the slot bigger or shave the lips of the tabs down. I ended up doing the latter and then the design worked fine. But the consumer shouldn't have to perform that step. Just design it better! The unit was littered with little to no good places to grab and / or brace when trying to lock the tabs of the pieces in place. The drawer was the worst. Attaching the sides to the base was awful. When you get one side in place, applying pressure to connect the other side would almost invariably make the attached side pop back off. There were times assembling it where I wanted to scream or throw the whole thing away in frustration. I think it will hold up and serve its purpose well. The price seemed reasonable, albeit a little expensive for what you're getting. But the assembly may make it not worth it overall for most. BUYER BEWARE!

Once I finally got this put together and my blood pressure came back down, it’s actually pretty nice. It’s currently holding 22 nerf guns of various sizes and the little nerf bullet drawer is awesome. It’s a nice spot to keep all my sons nerf guns and I won’t have them laying everywhere in the house. Just keep in mind, assembly is a huge pain. It feels flimsy, the snaps fight you to snap in, you will feel like all hope is lost, but if you manage to push through, it’s worth it.

This Nerf blaster rack is perfect for keeping everything organized. It holds multiple blasters, accessories, and ammo, and keeps the playroom neat and easy to manage.

Looks good on paper but a complete pia to put together. Cheap, won’t stay connected, basically worthless.

Bought this for my son for Christmas, sitting here currently and it’s taken me and my husband an HOUR to put this together. Problems I have with it: 1. Made of horribly cheap plastic so whilst trying to connect, the pieces kept bending feeling as if they would snap at any given moment. 2. The price point of this item is abysmal for the quality of the item. The pictures look like a much higher quality item and I decided to go with the nerf brand thinking it would be better quality but it’s HORRIBLE! 3. The pieces are IMPOSSIBLE to attach. They do not easily connect to each other, I would rather spend more money and have to screw things together than pay a high price for pieces that don’t snap together or fit flush with each other. The instructions are semi simple to follow but they do not have the pieces properly labeled for example. They had parts in the instruction booklet labeled at E1 and E2 but on the parts they were just labeled E, funny thing is they were supposed to be put on a specific way. 4. I would have had to buy multiple because it really isn’t as functional as we thought, we couldn’t put all of his nerf into it because I was afraid it would fall apart or break.

El producto llego bien en tiempo y forma, es lo que esperaba y me dio una solución para todas las pistolas que tienen mis pequeños, ahora están ordenadas y eso también hace que jueguen mas con ellas.

My son loves this! I see lots of reviews saying it’s flimsy but I strongly disagree. It’s light but sturdy and it was very easy to assemble with lots of options to customize the storage. It holds a ton of guns and ammo and my 9yo picks it up to move it around all the time, it’s never come apart. It’s exactly as advertised! I’m thinking of getting a second one for the backyard.

Eigentlich habe mir gute Qualität erwartet und bin enttäuscht. Ist recht unstabil und meines erschtens das Geld nicht wert.

Bought this for my nephews who have recently gotten very into nerf guns. The bullets were constantly everywhere and we had nowhere to put their guns and other gear that had been bought for them, but this is really helpful and it helps us to teach them that clean up time is important because then they can find things later on. Also helped us realise just how many bullets they had, the drawer is almost filled!

Components can flex and bend under pressure, but after assembly, the rack is sufficiently rigid. Don’t pay more than USD $50 for this.