eXtremeRate Firefly LED Tuning Kit for Nintendo Switch Joycons Dock NS Joycon SL SR Buttons Ribbon Flex Cable Indicate Power LED - Blue

I recently upgraded my joycons with the ExtremeRate Soft Black shells, along with their Scarlet Red Buttons. I came across the custom LEDs shortly after, and figured I’d give it a go. I am very happy with the final result and will be upgrading more stuff really soon. It was pretty straightforward and only took about 20 minutes to do the pair. This time I didn’t need to follow a tutorial, because I was already very familiar with the inside components from previously swapping out shells for 2 Joycon sets. I am very satisfied with ExtremeRate’s upgrades, and love the look and feel of everything I’ve upgraded thus far. Their products feel very premium and do not feel cheap at all considering how affordable their stuff is. If you’re like me, and love customizing your controllers and gadgets. This is a one stop shop for video came console and controller upgrades. I will say people who are not familiar with taking things apart but what to give it a try, take things very slow and pay close attention to what you are doing. Some of the upgrades take time and patience. I’ve been in I.T. for over 10 years, so it was much easier for me because of my profession and training. One note to ExtremeRate: Love that you include tools with your products, and I do appreciate you provide them. However, I’m hoping in the future there’s an option to not include the tools. I’ve ordered 2 sets of shells, 2 sets of buttons, and now the LED upgrade. I now have 5 extra sets of screwdrivers and a ton of bits now. I’m just saying it might be cost effective and less wasteful on your end if you give the option of tools or no tools. I love free stuff don’t get me wrong lol, but I hate to see things go to waste.

Arrived fast and on time. I ordered ice blue, they look great, it’s hard to show it on camera but you can see the color reflecting on the right joycon. The LEDs are brighter than the stock LED, that may be just due to color choice so there’s a bit more of a flare effect (totally fine), just mentioning it as the stock LEDs have a certain type of look with their brightness level. That said, super simple, if you’ve done anything inside a joycon you probably don’t need instructions, though recommended of course. I think in total it was 8 or 9 screws in each joycon. Just be sure to unplug the battery to avoid shorting it out accidentally. Also came with various screws that work at replacements for screws in the event that you strip one. Anyways, for this price I highly recommend it.

If you're patient, take your time, and have no trouble following instructions then you can do this!! 🫶🏻 It looks intimidating but is honestly really easy to do, don't let it fool you. I followed a couple of YouTube tutorials and everything went smoothly for me. You'll get more comfortable with it as you go. It's nice that you have tools provided in the package they work well, but if you have your own better quality tools use those instead. I wish that they sent tweezers, make sure you grab some before you get started because you will want them to hold on to the ribbon cables. I also recommend keeping some little bowls or containers where you work, one for new screws, old screws, old buttons, new buttons, etc. The more you keep things organized the less intimidated/stressed you will feel while working. Good quality, the purple lights fit great with my purple shell, I love it!!!

Couldn't be happier. Super easy to install. I haven't tried the dock light yet, but I use an aftermarket dock so... yeah.

I have purchased the set and this is my review on the LED kit. I went into the entire project blind and used my knowledge in electronics to carefully reverse engineer the console and perform this swap. Take your time (it took me 4 hours total) or find a shop or friend to do this for you. That being said, if you just plan to swap your LEDs and nothing else, there is an easier way to do it. When taking the Joycons apart, once you take the 4 main screws off and separate it, you can use your spudging tool to carefully lift the plastic piece holding the ribbon cable for the LEDs off and remove it, replacing it, just do it in reverse. If you're doing a shell replacement, you can do this step just about any time. Easiest when putting it back together and you have access to the circuit board under the battery compartment. When disassembling the joycons, do not under any circumstances take any other ribbon cable off. Transfer the guts as one piece carefully. See my matching Switch and Joycon Review for this kit for more tips. Dock is pretty easy, that was my first tackle in doing this job, if you see a screw, take out the screw and work your way in. When removing Y screws, use as much force as you can and use small movements when turning the screwdriver. This kit came with the nice gold multibit driver which was great to use, but you will need the small one to remove the screw on the bottom right after you take out the circuitboard. The LEDs are nice and bright but the diffuser of the Switch didn't make them annoyingly bright like if you put the Joycons into the comfort grip, they won't blind your face. Do the work for the entire project and you'll be satisfied with the results. I'll also have reviews for the Switch and Joycon set, and the Dock set, just look for the pictures above to find the review easily!

I purchased this to replace a broken LED strip in one of my original Joy-Cons. It fits and works perfectly. As others have mentioned, they are significantly brighter than the original LEDs, which bothers me a tad. I installed these using tools I already had from replacing my Joy-Cons' analog sticks, so I can't speak to the quality or comfort of the included tools. Additionally, I didn't install the dock LED, so I have nothing to say about it either.

Ho acquistato l'articolo circa un mese fa, arrivato in due giorni, la confezione contiene i pezzi di ricambio e i kit di cacciavite adatti per lo smontaggio dei joycon.Funziona tutto perfettamente oltretutto all'interno della descrizione dell'articolo c'è un link che rimanda ad un tutorial su youtube ottimamente spiegato nei dettagli sia per il joycon sinistro che destro, è stato tutto molto semplice, anche l'assemblaggio, basta solo un minimo di manualità

Era justo lo que buscaba para terminar el look de SNES de mis joycons, todo gracias a extremerate, simplemente perfecto, se ve y está genial.

Sono perfette

C'est parfait. En suivant la vidéo sur youtube, ça se démonte et remonte en 15 minutes en faisant bien attention, en étant méticuleux. Ça fonctionne parfaitement. J'ai récupéré mes boutons R, L, ZL et ZR qui ne fonctionnaient plus du jour au lendemain sans que je les utilise (c'est bizarre) Pas besoin de racheter des manettes à 80 balles ! :D Et les Led rose fushia sont du plus bel effet ;)

I've pimped out my joycons (2 sets) and pro controller with skin + buttons and the joycons with two different sets of LED's, loving it all from ExtremeRate so far