Combination Metric Bubble & 45 Degree Double Flare Tool with Deburring Tool
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8Thumbnail 9

Combination Metric Bubble & 45 Degree Double Flare Tool with Deburring Tool

4.2/5
Product ID: 30219847
Secure Transaction
Frequently Bought Together

Description

  • Unique Vise Clamp with removable single flare end to insert the bubble head adapters
  • 45 degree single, double or bubble flares on soft steel, brass, or aluminum tubing
  • Includes seven adapters, yoke assembly, bar assembly, and handle in a molded storage case.
  • Double flare and metric bubble flare
  • INLINE TUBE
  • ›See more product details

Combination Metric Bubble & 45 Degree Double Flare Tool with Deburring Tool

Reviews

4.2

All from verified purchases

B**R

All inclusive kit

My poor old Ford pickup blew a brake line at the end of my driveway. Ford doesn't sell replacement brake lines and almost no one does. They said they make them as needed. It would have cost me at least $80 to tow it to a shop and then the cost of the repair. I figured how hard could it be. Well leave it to Ford to crap things up like always. I did a google search for 2001 F150 brake lines and thank goodness a friendly fellow posted pictures and details of the job. Turns out in their infinite stupidity, Ford used standard 3/16" line with a standard double flare at one end but a metric bubble flare on the other. Imagine my frustration if I didn't know this ahead and only got a kit that did double flares. So fast forward and I got this all inclusive kit, the right fittings and some brake line. total cost around $65. I found the this tool to be very substantial. The fact that it has both metric and standard clamps and both types of flares allowed me to complete the brake line in about an hour. The clamp was super strong and held the 3/16" line with authority and only finger tight. Trick is to tighten the end closed to the line first and use the mechanical advantage of a distant second clamp and you have plenty of strength and still plenty of air between the vice bars. I made a practice flare, cut it off and made another just to check it out. It seemed good enough so I ran the line 80" or so along the frame and did the bubble flare in place under the truck. It all worked and held with no leaks. Good enough for me and what a savings of time and money on just the first use.

E**N

Great kit, instructional guide could be more user friendly.

I purchased this set due to the ability to form both metric and SAE sized line. The instruction sheet on the top cover is for "ISO Bubble flares". Although there are no instructions for any other type of flares one can perform with this set. There are two different types of bits (colored black and silver) in this kit but there are no instructions as to what they are for. I was uncertain as to which ones to use while performing a bubble flare for a metric system so I used the black bits. But I found the metric line holder marked for the 4.75mm line slipped while trying to form the bubble and realized the metal line I bought was a 3/16ths (SAE) type line. Once I utilized the correct forming block, the set worked great. It formed a perfect bubble flare that held brake fluid, under pressure, without any leaks.I have an Isuzu Amigo that developed a fluid leak in the old metal line due to rust over the years (1999 model). Since the original line was installed before the body was placed on the frame, I had to form a new line in three sections to be able to fish it through the space provided for said line. Using 10mm X 1.0mm fittings, I was able to restore the rear metal brake line to a working unit. I had to form/replace the entire metal line from the connection at the right front wheel, along the frame rail, bend it behind the rear support rail and connect it to the rear junction block for both rear calipers. With some careful measurements, patience and a tubing bender; I was able to complete the job that was both functional and aesthetically pleasing (for an unseen portion of a hydraulic system).I would absolutely recommend this kit although I only gave it 4 stars since their include instructional sheet seemed lacking for a shade-tree mechanic. If you already know what every part and bit is used for, I'm sure it is not a problem. Since I was unsure, I checked Youtube and did a couple of practice flares to make sure I was using the correct bit.In the photo of the bubble flare (2nd photo) you can see all the scratches/serrations on the line. That is from my use of the 4.75mm jig instead of using the 3/16ths (SAE) jig, which I should have used initially. The "Teeth" on the jig will imprint on the line slightly but a bit of emery cloth or a mild file will remove any rough edges to pass a fitting over the tooled area.The kit is well worth the money and I would have given it 5 stars if the included instructional sheet would pander to the novice better.

L**R

Only got one good flare on one end of the tubing before it ...

Instructions are lacking. 3/16 line slips thru the block no matter how tight you get it. I got the block so tight, it squished the washer on the top wing nut. 3/16 tube kept slipping thru the block so I kept tightening the wing nuts. The bottom wing nut pivot bolt sheared off. First time I used the tools and the block broke on the second flaring of the tube. Only got one good flare on one end of the tubing before it broke. Disappointing to say the least.

M**.

get familar with tool before making flare for installation

In order to make good bubble flair: I had to use back side (square) cut to form a good flare for mybrake fitting application & use vise grip pliers to keep tool surface smooth while forming the flare.Did great job with those changes in procedure. Made several test flares before final installation, tofind what worked best. Would recommend change in spacing for bolt to secure smooth surface ontool to make great flares on tube.

M**D

Chews up the brake line exterior

The serrations inside the tubing holder chewed up the exterior of Ni-Cu line pretty badly. I don't like it. I have a Rigid flaring tool that also has the serrations inside the holder but didn't do any damage like this tool does.

J**L

Product quality is poor.

Bubble end broke. Not over tightened. Asked for replacement and no help from seller. Told I could buy a new piece. Product quality is poor.

R**R

this is by far the best one I have used

I have used generic flaring kits sold by local auto parts stores in the past, this is by far the best one I have used. Very good quality, worked on both the steel and Nicop lines with ease. I expect this to last a long time, very happy with this purchase.

H**D

They do bubble flare as well

They do both style flares and work very nice

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
468 Lei

Duties & taxes incl.

Romaniastore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Combination Metric Bubble And 45 Degree Double Flare Tool Deburring | Desertcart Romania