Junction Box, Zulkit Project Box IP65 Waterproof Outdoor Box ABS Plastic Electrical Boxes Electronic Enclosure Black 4.5 x 3.5 x 2.2 inch(115 x 90 x 55 mm)(Pack of 2)

I use these to build battery boxes for my trail cameras. Work great and they keep the batteries and wiring dry and secure.

Works well, seems to seal well

I'd take off 1/2 Star since you have to install the gasket and it isn't a continuous gasket, but the box is sturdy for being plastic, has stainless screws, and is offered at a decent price. I will buy more. I'm using one box to mount a buck converter, on/off switch, and 9vdc power jack with a battery converter mounted on top for a Milwaukee Fuel battery. It provides ample, clean power for guitar pedals. The batteries last many gigs before needing a recharge, it's easy to carry a spare battery and it eliminates searching for a 117vac outlet, ground loops and having another power cord on the stage. Use a daisy chain, plug and play, excellent clean power and far less expensive than the regulated, filtered power supplies they try to sell you. FYI, you can do the same with a DeWalt battery adapter, or any other. You'll need this box, the battery adapter (they come with on/off switches and fuses), a buck converter and a DC out jack. Tools; a drill and bits, screws to mount the battery adapter, a soldering iron with solder, and a multi-meter to set the buck converter voltage. Not difficult to do.

Good quality box, good price.

used this to house a small ESP-based microcontroller and relay for a lighting project. gasket fits well and makes a solid seal. i drilled a hole to accommodate some wiring though and it was easy enough to drill with a standard bit. be aware the inner dimensions are not perfectly rectangular due to the screw holes in each corner. sturdy, solid construction.

Worked great for a project I had.

I used this project box to enclose and mount a 3-3/8" digital GPS gauge on an older UTV. The exterior finish, quality and stainless hardware are perfect for the application. Highly recommend!

Nice little box, I used on to make a120 V AC Voltage monitor. I had a small 0-300 volt AC meter that fit on the the box. The only other thing needed was a line cord. The analog meter shows voltage and fluctuations on the circuit feeding my Ham station.