Pop Filter,PEMOTech [Upgraded Three Layers] Metal Mesh & Foam & Etamine Layer Microphone Windscreen Cover Handheld Mic Shield Mask,Microphone Accessories for Vocal Recording,Youtube videos,Streaming

I picked this up originally because I was trying to deal with plosives, the P sounds, S hiss, all that stuff that can make recordings sound harsh or poppy. I didn’t expect a huge difference at first but it honestly helped a lot more than I thought it would. I’ve used this filter across multiple microphones over the years. Started on my Blue Yeti, then moved it over to my Audio M Nova, and now I’m using it on my Tonor 777. So it’s definitely been through a few setups and it’s held up the whole time. Build quality is solid. The mesh and inner layers have lasted years for me. The only thing that didn’t last forever were the rubber bands it came with. A couple of those broke and I lost the others, but that really wasn’t a deal breaker. I just use a small scrunchie band to hold it on now and it works perfectly fine. Sound wise it definitely cuts down on plosives and helps tame some of the high end hiss from S sounds. It’s not magic but it noticeably smooths things out, especially if you talk close to the mic. I also run mine with extra filtering, like a foam windscreen or sock over the mic itself, so I’m basically triple filtering. That plus software filters really helps isolate the voice and cut background noise. Obviously a full isolation booth is ideal but most people aren’t doing that, so little upgrades like this help. For around 10 bucks it’s honestly a solid buy. Cheap, durable, and it does what it’s supposed to do. If you’re recording vocals, streaming, or doing voiceovers it’s definitely worth having in your setup.

works

I purchased this pop filter to replace the windscreen of my Marantz Pro MPM1000, this fits like it was made for it and works as intended. I must admit that it gives my setup a more refined and professional look which definitely adds to its appeal. The pop filter is made out of cheap materials which is not a surprise at its price point, that being said, it's worth every penny and should last a long time with proper care. If I had one request, I would have liked to see the hooks for the bands at a horizontal axis, just so the bands are in parallel which gives a more uniform grip around the microphone, not a deal breaker by any means.

Great fit and Easy install on AKG P220 Large Diaphragm Condenser Microphone with the stock shock mount, using 45-61mm version. I love the minimalism, this is much cleaner looking than the ones with the big arm that attach to your mic stand. At $10 this is a cheap, easy upgrade that doesn't take up any extra space.

This pop filter is just the right size to cover the Blue Yeti microphone (see pictures). I like how small the form factor is, allowing you to see in front of you (and a camera/person can see you). It looks very professional. You need to use all 4 of the provided rubber bands to do this. There should be two already installed on the pop filter and two more in the box. Simply tie them together in pairs of 2 and reinstall them. There are two plastic half circle pieces behind the filter screen on which the rubber bands are stretched. You can actually clip one of these half circles onto a Yeti microphone right after the lip separating the body from the grill (metal mesh), which is also where one of the rubber bands will rest (see pictures). The tension is barely strong enough to hold the Yeti in place, but I still prefer to use the rubber bands for safety. This placement is just the right spot for it to stay forever, and I never have to worry about bumping my pop filter again. Since it is directly attached to the microphone, it goes wherever the microphone goes. Overall I recommend this to anyone looking for a smaller form factor pop filter that still covers the entire microphone, at least the parts you'll be speaking into. Note: if you clipped the pop filter on and it isn't covering the whole microphone grill, then turn it upside down and try again. The clips are not evenly spaced on the filter, and you want to have the one that is closer to the edge of the filter clipped onto the microphone.

I'll start with the good; the filter itself is phenomenal. Makes my voice sound crystal clear with my hyperx quadcast s. The mic itself already sounds great, but getting way too close or exceptionally loud will make it pop and distort. This takes almost all of that away entirely. Now the bad. The rubber bands are great bands alone, but they're way too small for how much space you need to get them around the mic. You have to drag/slide them down over bit by bit. Not just that, in conjuction with being too tight, and the plastic that surrounds the filter being too weak, one of the hooks that holds the band bent itself straight and doesn't hold the band anymore. So now it's hanging on by a single, way too tight band. If the bands were longer or the plastic was stronger, I'd give 5 stars and call it flawless. But they're not, and it's not, so I can't. ::EDIT:: Seller has contacted me and taken full responsibility for the defective item. No complaints.

Honestly, this mic shield works, but mostly by way of cutting sound and air from reaching the mic. The best feature is that it fits pretty close to the mic and doesn't make up a ton of space or cover your face. But I actually think a foam cover would be just as good if not a little better. The fitment is pretty hit or miss. An Audio Technica AT2020 would probably fit well. I had to make it fit my MXL 700 microphone, which is round instead of kind of oval shaped. I heated the body at a distance with a heat gun. Stretched it to be wider and let it cool in that position. I broke the rubber tie that it comes with so I used a longer elastic tie that I salvaged from an old shock mount for another microphone and retied it around my MXL. But.. You probably won't have that. So I got lucky. It's better for protecting against plosives than nothing at all, but I still have to use good Mic technique an aim the mic at my mouth and not my mouth at the mic to avoid plosives. At $13, it's not exactly a bunch of money lost but... I'd probably rather save the money and spend it toward Stedman or something similar if I had it to do over again.

Calling all fellow vocal enthusiasts! Prepare to unlock a new dimension of your voice with the PEMOTech Pop Filter—it is an essential tool that not only enhances your sound but also adds a touch of allure to your vocal performances. As someone who occasionally indulges in vocal endeavors, this pop filter has transformed my audio setup into a realm of sonic beauty. Its upgraded three-layer design is a masterstroke of audio engineering. Featuring a harmonious layer combination of metal mesh, foam, and etamine, this filter effortlessly captures those pesky pops and plosives, allowing your voice to shine with clarity and charisma. The magic doesn't stop there. This pop filter has an unexpected bonus—it seems to add a touch of seductive charm to your vocal tone. With every word uttered, your voice acquires a magnetic quality that demands attention. Whether you're recording podcasts, narrating stories, or serenading your audience, this filter becomes your secret weapon to crafting a truly captivating audio experience. Setup is easy. With a straightforward installation process, you can attach it to your microphone stand in seconds, ready to transform your vocal recordings. Additionally, the easy cleaning process ensures that maintaining the filter's performance is a breeze. Just like that, you're always ready to captivate with flawless audio quality.

faz o serviço

Satisfait.

Si se usa a una distancia adecuada (a una cuarta de la boca) cumple con su función, pero al acercarte aunque sea poquito al micrófono, empieza a popear. Por eso no puede tener las tres B; siempre es barato y bonito, pero no siempre es bueno.

Sipariş elime ulaşmadı.para iadesi talep ediyorum

It works great. There is a significant difference in popping being picked up by my mic (audiotechnica at2035). Only negative thing I can say is that the image makes it look like the front is shiny metal. It isn't, so don't be fooled by it. It looks more matt metal like other similar products on amazon. For me that was the deciding factor why I paid more for this one (the shiny metal), but it is just the same as other ones. It is still cheap and effective!