WPW10314173 W10314173 Dryer Drum Support Roller Kit Dryer Drum Rollers Replaces W10314171 8536973 8536974 AP6019303 PS11752609 Suitable for maytag kenmore whirlpool kitchenaid Dryers-4PCS

Received them on time. Rollers were an exact fit. Installation of the rollers were very easy. Taking apart an 25 year old dryer was a little challenging, but once apart the rest was easy. I just installed them about a week ago. So, l don’t know about the longevity. The dryer sounds great and is working beautifully.

I have an older dryer. About 24 years old. Always worked great. I like it so much better than the newer less durable options.Suddenly it start squealing and rattling and behaving very poorly.I found that the wheels had seized and were not spinning at all. I cleaned them off and could see that the wheels that had been on there for more than 20 years had worn and were rattling on the metal rods.I bought these to replace them with. I am super glad that I did.I really like these and they fixed the problem.I found a video on YouTube about how to dismantle the dryer. I did so carefully so as not to loose screws. Takes all of 5 minutes. I the old wheels out and the new wheels in and the whole things re-assembled. It is once again quiet and smooth.If you are reasonably handy, meaning can use a screw driver and can lift about 20 pounds, then I would recommend the fix in general and these wheels in specific.I was looking at the "real ones" from the OEM vender. And I got all 4 of these wheels for less than 1 OEM one. I figure the fix was so easy that even if it is needs to be done every 2 or 3 years I would buy these again and again.

Ordered for MEDB400VQ and works fine and quite. Easy to install. I only needed these but I ordered full set from another seller but it didn’t work for me. Belt was shorter so I ended up spending more time to fix this. My suggestion is only order what you need do not order sets because you are not going to be able to use all of those parts that comes with the sets anyway…

Tldr... rollers look good. Hardware included could be better.I've seen several reviews from many different brands about rollers breaking. These appear to be identical replacements. Top is new in photo, bottom two are the old. New is unmarked (no part number). I'm sure ill update this review should they fail sooner than anticipated. Most reviews of failures seemed to be in kits (belt, pulley and rollers). I noticed the kit that says it's for my dryer doesn't always have compatible parts. Belt would be right but the pulley and rollers would be different part numbers (or a mixture). Check the individual part numbers for each part in the diagrams you can find online. I chose to buy each part individually since I couldn't find a kit that had matching part numbers. With a mixture of good and severely bad reviews in my search, I am making the assumption the kits don't have exactly compatible parts. They may go in but I'd guess there is something not right and leads to failure. I'm no expert, just an assumption.Went on easy except for the push nut. I had to use a Philips bit and a socket to expand it a bit. Slots appear to be punched and not enough to expand without some force. I figured it wasn't a great idea to hammer the push nut in the dryer assembly and risk damaging something else. Lay the push nut in the socket and gently tap the bit in until it gives a little. Not too much otherwise you'll defeat it's purpose. Short bit and long socket would be best to be able to knock it out if it gets stuck (just flip over in the socket and tap the bit). I stressed tested the bracket supporting the roller shaft and it was a snug fit.Triangle washers appear to be cheaper, more flexible than the originals. I destroyed the old taking them off so couldn't reuse those. The ones included look like they will do fine. I stress tested each of those and they stayed in the grooves of the shalf as well.Lastly you could hear the new roller on it's initial run but that sound died down after running for a bit (less than 1 dry cycle). I didn't add any grease. No guides I've found mentioned it so I didn't. Also it may not be a great combo with what builds up in the cabinet over time.This was my first time working on a dryer and the disassembly and installation was easier than expected. Didn't time it but wasn't a long process.Used a shop vac and some paper towels to clean out and wipe off components. All around dryer is working (and sounding) good as new.

It Works great

Fit my Whirlpool Cabrio WGD7600. A little snug on the wheel shaft so I used a touch of white grease. My dryer is super quiet now.

Along with new belt and tensioner pulley these completed repairs of Whirlpool Dryer.

We replaced all four rollers because one was worn out and all were old so we changed them.

La calidad y el tiempo de entrega son sencillamente excelentes

Repairing a noisy dryer. Parts ordered did the job successfully.

These wheels have an aweful odour like burnt rubber.I cleaned the original wheels' sleeve bearing with alcohol and reused them instead.

Me gusto mucho y funciona muy bien en mi secadora de ropa