Bur3302-1kg

I have been using this to paint my tiled stall shower. I had problems with the grout disintegrating and causing leaks. Grouted areas were prone to mould growth and hard to clean. Finally I had to repair an area with mismatched tile. Enter NADAMOO Refinishing Kit. This was exactly what I needed to finish off the repair and resolve the grout problem as well. This two-part paint was easy to apply with water clean-up despite the challenge of painting a small enclosed area like a shower. I tried to stretch a quart to cover the area I needed, but a second coat was necessary. I gave it the required five day dry time, but it seemed to be adequately dry well beforehand. The end result is a pleasant stall shower, which I elected to paint walls and floor the available beige color. It transformed my shower from a creepy questionable mould repository to a clean, bright and pleasant shower. There have been no problems since the application of the NADAMOO product. It is easy to keep clean with an after-shower spray. If you have plans for a similar project, beware any areas that have been sealed with silicone sealer. The paint will not adhere to these areas, and it is very difficult to get all the silicone sealer removed. If you have areas of your tile that need repair, be sure to use grout, not silicone.

I have refinished my bathtub in the past and then it was a toxic smell for several days so I couldn’t even be in the unit. This product was very easy to apply and did not have that toxic smell. My tub looks like new again.

I've painted my tub 3 times. The first 2 times I used Rustoleum (I had to "fix" the first attempt) and I'll never go back to it after using Nadamoo. My comparison are specifically for these 2 kits. 1. Finish - Nadamoo has a more satin finish compared to Rustoleum's gloss finish. I didn't realize how much more I prefer Nadamoo's finish simply because it hides imperfections. My tub is a 52 years old basic fiberglass surround tub/shower that they put in every raised ranch built in the 70s. It's beat up and the Rustoleum caught every last one. Nadamoo did not. It didn't hide everything but the satin finish is very forgiving. Also, Rustoleum can leave finish inconsistencies because of the gloss. Nadamoo avoids all of that with the satin-like finish and it's beautiful 2. The paint itself - this was the deciding factor for me. Rustoleum's kit requires you to work fast while using too many foam rollers. The Rustoleum paint would start to dry/harden as you were using it and the roller would get stuck to the tub and be ripped apart leaving little foam bits everywhere to pick out. Very annoying. I went through am entire package of foam rollers with Rustoleum. I could have used the same roller to do the entire tub. I didn't, but I could have. The Nadamoo paint, even with the harder added, stayed in liquid form in the container with the cover on. And there's no rush to paint as quickly as you can. I don't know about you, but any added stress when DIY-ing can lead to, well, having to re-DIY. Not my idea of a good time. Strategy is important when using Rustoleum but this isn't the case with Nadamoo. You still need a strategy but it's much less rigid since the paint doesn't start to dry immediately. 3. Cover - Rustoleum definitely has more cover than Nadamoo. But that's because Nadamoo is water based. It took 2+ coats since there was some patching needed before I painted and Bondo doesn't hide very well under white. I used the Nadamoo to "prime" the patches and it needed 2 priming coats. Then I put 2 coats on the tub. But you get more paint with Nadamoo than Rustoleum so there was more than enough paint for all of this. After seeing the finished product, I didn't care about needing more for coverage. It could still use another coat especially on the Bondo bits but with the curtain drawn, it's darker in the shower and I can't see it. And if I can't see it, it's not there. 😁 4. Odor - Nadamoo has no odor other than smelling like latex paint. Rustoleum? Windows are open, masks are on and headaches are had. 5. Affordability - Nadamoo sends you everything you need. Well, ish. I didn't use the included foam roller and roller handle. But the plastic edged masking tape, the sandpaper and spreader I did use. Could they leave these things out and charge less? Absolutely. I used them because they were there but could've gotten by with out them. But if someone doesn't have any painting supplies then the included items might be helpful even though we all know included accessories like that are usually garbage. Otherwise, I found Nadamoo to be more affordable than Rustoleum. End result? I'd repurchase Nadamoo over Rustoleum because the finish doesn't last, it's much more difficult to work with and I'm nauseated thinking about the odor right now. In all honesty, I really hope to never have to paint another tub ever again. But if I have to, I'll use Nadamoo.

I was a bit skeptical at first. Especially since we didn't realize the knuckleheads who sold us the house the house had painted it in the first place. About 1.5 years in and it started to chip and crack. Surprise!! So why pay the most conservative estimate of $700 to have it 'reglazed' when I'm a smart guy, let's try this myself. I purchased the 35oz kit. The sandpaper that came with it was OK. First I scraped as much as I could off (see the pic), and then I used my orbital sander and got it smooth as a baby bottom. Wiped it down with some regular water, let it dry then got to work. It took two coats to get it smooth and looks like new, but the 35oz kit did the job with some left over. Used the brush for the corners, and then the included roller to reglaze the entire shower. I've been letting it dry/harden for the past 5 days - so from a long-lasting and durability perspective is TBD. However, I can tell you that it looks 100% better than when we first moved in, so I have high hopes that it will be fine. Very easy to use. Minimal smell, and great results! Titan approved! $700 my a**!

BUY THE OTHER ONE!!!!!!!!!!!!!!!!! I have this huge, gorgeous farmhouse sink that I've been trying to refinish for like 8 months. I bought the rustoleum refinishing kit and did the sink last spring. it looked good! But then I got the idea to try pigmenting it so I bought another one of the same kit, pigmented it and pained the sink. It looked bad. I tried to sand the sink but that rustoleum kit doesn't play. I took the sink to a sandblaster, it got so much worse!!!!! I went over every square inch with a wire rotary brush on a drill. It took weeks and weeks. I filled the low spots with JB Weld steel stick, sanded and sanded, then painted with this nadamoo kit. OMFG it came out so bad. it's matte, not shiny AT ALL. The product is WATERBASED for sinks and tubs and tile?! 3 days later, if you brush against the sink, white paint dust gets all over you. I'm so sick of this project that I am just going to install the sink, but it seems so obvious it's going to fall apart. If you're reading this, BUY THE RUSTOLEUM KIT INSTEAD!!!!

The step process is easy and now my sink is brand new again!

Amazing! I have tried so many name Brand tub epoxy products, none compare to this one!

More then pleased with this product . Was surprised to see everything that could be needed was in the kit . Preformed better then expected . Will advise anyone painting tile with grout, to paint the grout first and then go back to finish the tile

I used this to resurface my bathtub almost a year ago. I use the bath daily and this product has held up well. Will definitely use it again if I need to resurface a bathtub. I chose this over the rust oleum due to this being acrylic and less toxic.

Wonderful product. Works amazing and easy to use. Used it on tiles in bathroom and kitchen. The grey looks great. I wish they Had smaller sizes so that you could touch ups. I missed a few spots and the regular size is to much.