Digital Thermostat Plug Socket Temperature Controller Outlet 3m Probe 120V 15A 1800W C F Heating Cooling Control for Incubator Brewing Incubator Greenhouse Terrarium Heat Mat

Works great

I brought this so we could keep a bedroom temperature constant for a bed ridden elderly patient. The problem with a space heater is that the on and off temperature range of the built in thermostat is too broad. So the room is either too cold or too hot. Also the thermostat is on the heater, so it is measuring the temperature near the heater (which is at ground level) - not of the room in general. With this thermostat I was able to set the on and off temperature very close, and was able to place the sensor at bed height. This gives an accurate reading of what the patient is experiencing - remember heat rises so if the sensor is at floor level it is measuring a cooler area of the room, or if it is higher it is measuring a hotter part of the room. Also keep the sensor away from windows as it is cooler there and away from lamps as they give of heat and also affect the reading. I set the on temperature at 73.1 and off temperature at 74.3. This kept the room at a perfect temperature for the patient with no wide swings. The only down side is that it is hard to change the settings on the fly. So we put a second space heater in the room, so on the odd occasion the patient was cold, we could just turn on the second heater for a while to boost the room temperature. This was not often required but more convenient than trying to adjust the settings on the device

It remember the settings even when you unplug it and automatically resumes when plugged back in which is nice, but unfortunately it only can do one function at a time so I am using it plugged into a separate timer plug to control a heat lamp only during a set time everyday. Nice long cord on the thermocouple. Bright display

I use this thermometer controlled receptable/socket for my 1500 watt heater in my "she shed" to supplement the Mini Split. It works fantastic! I also have one in my well house to turn on the heater to prevent freezing. These are very accurate. I monitor the temperature with a WiFi thermometer. I no longer worry about freezing in the well house and I stay very comfortable in the she shed.

I use it to control a heater for a smaller space. The temperature range is set at 68°F to 69.8°F and has been working correctly and stably for over two months. worth.

A friend had one in their greenhouse and was happy with it. I ordered one for my greenhouse. So far it has worked perfectly and should save us some money when needing the heater. I would definitely recommend this product.

I'm using it to keep an unheated room from freezing and will use it in the summer to turn on a fan. Works well. I don't need some of the functions so can't comment on them. Would buy again.

I have two in different rooms turning heaters on and off. They work as they should.

I've been 3D printing for a few months now, with an enclosure and this was the perfect product to pair with a space heater to get those perfect temperatures for my 3d printing jobs. Very steady swing controls and even has 4 other set points configurable on the terminal. 5/5

We got this last fall to control a heater for our home built green house. It reliably turned the heater on and off as required to make sure nothing got too close to freezing. Now that the weather is warming up we are using it to control an exhaust fan in the green house - on at 85F or greater, off at 80F or less. Programming is dead simple: Off temp > On temp for heater, On temp > Off temp for fan. The temperature sensor has a long cord so that it can be located appropriately and the display is easy to read. If it lasts a couple of seasons I'll come back and give this rating a 5.