XZN Triple Square Spline Bit Socket Set, Metric, 10-Piece

Capri makes very good quality tools and these are no different. Well worth the price

Update: I have been using this set for years now. I have done multiple head jobs with them. When I strip and Allen or torex bolt I hammer in one of these and it pulls it right out. I have even used them as broken bolt extractors. I cannot recommend enough. I work as a professional mechanic for over ten years my tool set is all snap on and mac so you can understand what I look for in quality tools. I bought these to change the water pump on my 03 VW gli. I would like to start with saying that before I decided to buy these I tried to get buy with using an Allen bit to pull these spline bolts out and although I got 2 of 3 out I pretty much stripped the third bolt and forced myself to buy these. Once they arrived I took the bit that fit and hammer it into the bolt and to my surprise it grabbed what was left of the bolt head and pulled it out after I pulled the bolt out I looked at the socket and bit and again to my surprise it showed no sign of being beat on at all all the points of the spline looked like it just came out of the box so I continued on and after I reinstall the pump I looked at the bit again expecting to see some twist to the bit or some signs of wear that you would expect for a tool of this price but I didn't see anything it still looks unused. My conclusion on this product is it is well worth the money for the DIY weekend worrier or for the new mechanic building their tool set you can use these till you break a bit and than replace it with a snap on or mac or whoever you prefer than use the lifetime replacement to replace the original broken bit that way you'll have high quality tools and backups for the bits you use most often. That is what i plan on doing.

I bought these bits to work on my friend’s 2017 VW Beetle. If you’re looking for the specialty bit to remove the skid plate so you can change the oil, this is what you need. As a general rule, I determine what grade of tool I buy based on how often I need it, and how critical it is to work. Tools for infrequent use are generally cheaper ones. “Mission critical” and frequent use tools are typically higher end. I bought these bits thinking that I would rarely use them, so I wasn’t going to spend a small fortune on Snap On or other higher end bits. I have to say, I never had heard of Capri before buying these. I expected cheap bits that would “do the job”, but might not fit perfectly or have a quality feel to them. To say that I was pleasantly surprised with the Capri brand bits is an understatement. They appear to be well built, and fit the fasteners on the VW perfectly. They’re just as good as the “name brand” bits without the “name brand” pricing. I was quite impressed with them.

A word of warning, the larger bits are hollow center, so you may or may not want to attempt using them on a high-torque application. For example, the rear caliper bolts of many Audis, VWs and Porsches use a 16mm XZN, and from the factory, they have been known to be torqued on at or above 200 ft lbs. There are already reviews of this product shearing off, albeit the 14mm, but I'm not sure I'd trust my brake calipers to them given the cost of fixing the situation if you were to create an issue with a stripped or sheared bit. If you are in the same predicament I was, Audi sells a part number T10198 via their dealer service departments, about $30, solid core 16mm XZN 1/2" drive bit, $30, made by Snap-on. Other than that, they seem like reasonable quality bits, for reasonable duties.

Bout it BRAND they are tough and work perfectly at a Great price

Feels good in the hand. Bought for the elusive 9mm Triple Square but wanted matching sockets. Time will tell how it holds up. They’re a little on the long/large side.

Great selection, good quality tools, in a really nice & durable fitted blow-molded case with clasps that are going to last a long time

These bits worked as expected where tight space was not an issue. The only downside that I encountered using these bits is that they are too big for many tight spots under the hood. I tried to use them remove one of the transmission bolts and cooler lines on a 2009 VW, these bits were way too long--I had to use the OTC "Super Short" socket bits. UPDATE (11/2015): I have used the bits several times since my first review where space limitations were not an issue. These bits are some of the strongest and toughest I have ever used (at least compared to Craftsman and Snap-on). For example, I used a 3/8" bit with to a 1/2" adapter and turned it with a 24" long 1/2" drive breaker bar to break loose rusted bolts. The Capri Tools bit held up and didn't even bend any of the triple square splines on the bit! The 1/2" drive breaker bar and extension visibly twisted (slightly) during removal, but the bit still held up to this load. Worth every penny.

耐久性はわかりませんがとても仕上げは綺麗でしっかりしてそうです ケースも綺麗でかっこいいです

Good value set. Well made and reliable. Comes in a sturdy case.

Acheté pour démonter un étrier arrière de VW Passat B6, je m'attendais à un produit à usage unique. Le genre d'embouts que si ta clé est de travers, on flingue la tête de vis. Or il n'en est rien ! à la clé à chocs (pourtant pas fait pour ce type de torture), les embouts ont fait leur office sans broncher. Pas d'usure anormale, pas de torsion et pas de tête de vis flinguée ! Pour le prix, ce petit coffret est digne des marques de milieu de gamme pro. une bonne surprise donc pour cet achat.

Excellent product, good finish and quality exceeds expectation.

Very good quality product used on Audi Q5 without any issues.