Creality Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

I recently upgraded my Ender 3 3D printer with the Creality Official Extruder, and I couldn't be happier with the results! This aluminum drive feed Bowden extruder has truly transformed my 3D printing experience, and I'm excited to share my positive experience with it. First and foremost, the build quality of this extruder is top-notch. The aluminum construction not only looks sleek but also feels incredibly sturdy. It's a significant improvement over the stock plastic extruder that comes with the Ender 3. The durability and precision of the Creality Official Extruder are immediately noticeable. One of the most significant benefits of this upgrade is the improved filament feeding mechanism. The extruder grips onto the filament with a firm yet gentle hold, eliminating the risk of slipping or grinding. This translates to smoother and more reliable 3D prints with fewer extrusion issues. I've noticed a significant reduction in under-extrusion problems, which were a common occurrence with the stock extruder. The installation process was a breeze, thanks to the clear and concise instructions provided by Creality. I was able to swap out the old extruder for this one in under 30 minutes, and I'm not particularly skilled in DIY projects. It's a direct fit for the Ender 3, which means no additional modifications are required. Another standout feature is the easy filament change mechanism. Loading and unloading filament has never been so hassle-free. This makes filament swaps quick and straightforward, minimizing downtime between prints. Overall, the Creality Official Extruder has significantly improved the performance and reliability of my Ender 3 3D printer. The build quality, ease of installation, and enhanced filament feeding system make it a must-have upgrade for any Ender 3 owner. I'm now enjoying more consistent and high-quality 3D prints with fewer headaches along the way. If you're looking to take your 3D printing to the next level, I highly recommend giving this extruder a try. It's a game-changer!

Sadly the horribly plasticky extruder that comes as standard with the Ender 3 V2 snapped after a few dozen hours of printing.The plastic cracked around the heat-inset, on the tensioning arm, that is used to hold the drive wheel in place, this meant there was inconsistent tension on the filament so kept getting random under-extrusion during printing. This all-metal (aluminium) extruder is an effective replacement. It is not going to snap,it was easy to fit and just works. It was also a reasonably price, there are other all-metal extruders out there (for the ender3 v2) but they cost more as they come with a bunch of pointless "extra" stuff (nozzles, springs, pneumatic connectors, etc). Basically Creality should have fitted this as standard equipment, it would have added a few pounds to the base cost of the printer but would have been worth it to avoid all the wasted filament and frustration. I am happy with this all-metal extruder.

This is a major improvement on the stock Ender extruder and has improved my prints noticeably. It's a bit tricky to install, it came with no instructions but there's plenty of YouTube tutorials to help you along. The problem I have with it is the connector to the bowden tube. Unlike other extruders that use a coupler which you screw into the baseplate, this one just has a snap in plastic sleeve that you slide the tube into. It's all neat whilst it's working, but having had a small blockage in my tube, I discovered that it's a nightmare to remove from the sleeve which I had to use a pair of pliers to yank it out, ruining the tube, and snapping part of the sleeve.

Amazon prompt Prime delivery as usual. Replacement for the failed idler arm (see pic) of my fairly aged Ender 3 Pro printer. Had to come as the stock arm is plastic and inevitably wears / cracks. This replacement Extruder set is all metal so should last a good while, and is nicely finished. Comes with an exploded diagram of the fitting, so extra easy to install. E-Steps would require re-calibration if your old extruder wheel was worn. But apart from that, a breeze to fit. Appears to be genuine Creality and comes with a length of Bowden tube, coupler for the new extruder, build plate levelling springs, and two silcone jackets for the hot-end. All of which will come in handy in the future!

If you're expecting one that's assembled, this isn't it. Annoyingly an assembled extruder would fit in the snug bag that it arrives in. The item arrives with a small tube in the bottom of the extruder which you will have to remove in order to fit on a v3 se.

The plastic tension arm on the stock extruder on my Ender 3 started to break. I noticed because my prints were suddenly really bad quality and I was seeing massive under extrusion. After removing the arm it basically fell apart (see photo) so I needed to replace the extruder. This one is red - colour is mostly irrelevant and is an official Creality accessory. It is also made of metal so should not break up through frequent use. Fitting was relatively straightforward and only the existing tools that came with the printer were needed. One thing was that my Ender 3 had a pressed on gear on the extruder stepper. This looked difficult to remove so I left it on rather that using the new one supplied with the kit (which is secured with a couple of grub screws). This works but does mean the filament is clamped a bit firmer than I'd like, even on its 'loosest' setting as it looks like the original gear is a little bit fatter than the new one would be. I also took the opportunity to replace the Boden tube at the same time as the extruder but that's a different review... So it's on, and it works. No problems other then the tightness of the grip on the filament. It doesn't seem to affect anything though and printing works fine now. Definitely recommended.

Un complemento ideal, una mejora muy significativa para la maquina, que al final acaba con el plástico roto de la presión del muelle. Este es metálico y parece muy duradero. El resto del kit, muy bien. Buen precio. No hay que configurar los pasos, para Ender 3 Pro va fenomenal.

This is a great item and improved my printing quality significantly for the CR-10 V1! Very easy to replace.

I was having feeding and printing issues for months and could not resolve it with leveling, slicing, or changing my hot-end tips. I decided to finally upgrade my OEM extruder assembly… and now it runs like-new again. My extruder wheel was so worn out it had a indent right down the middle. This upgrade was quick to install (watch the Youtube video so you know the sequencing) and just looks great overall. All my feed issues were resolved. An amazing value!

Calidad y precio

Bought it as a replacement for the plastic gearset. This works fine, removed my knocking issue. Be sure you E-step calibrate etc before you print. Afterwards i swapped to direct drive.