🔧 Connect, Configure, Conquer!
Applications: 1. Install the USB driver software. You can update or download this driver anytime from internet; 2. Plug the USB cable to your PC, the yellow 'POWER' LED will illuminate; 3. Slide-switch to select operating mode, and connect the test cable and HART device according to the following pictures: 11 * 24VDC/270Ω Mode: The red “24VDC” LED will illuminate. This mode can power all 2-wire HART device, internal loop resistor is available. Does not need external power and loop resistor. 22 * Normal Mode: The red '24VDC' LED will not illuminate. This mode is very typical for HART MODEM, need external power and loop resistor 250Ω~1000Ω. 33 * 270Ω Mode: 1. The red '24VDC' LED will not illuminate. This mode need external power, does not need loop resistor; 2. Run the HART application software to configure your HART device. The red and blue bi-color “Tx/Rx” LED will blink alternately when the communication is good between PC and HART device( Tx-RED, Rx-Blue). 3. If you finish your operating, Please close your HART software, then pull out the USB cable and disconnect the test cable. 44 Packing Lists: 1 x WS232UP Unit; 1 x USB Date Cable; 1 x Carry Pouch; 1 x CD Driver.
| Brand | Daphne's Headcovers |
| Manufacturer | KY hope |
| Model | WSUP |
| Package Dimensions | 14.48 x 11.43 x 6.1 cm; 227 g |
| Item model number | WSUP |
| Operating System | Windows |
| Compatible Devices | Personal Computer, Modem |
| Power Source | ac |
| Batteries Included | No |
| Batteries Required | No |
| Type of cable or wire | USB |
| Modem type | Cable |
| Number of Ports | 3 |
| Connector Type | USB |
| Material | Plastic |
| Manufacturer | KY hope |
| Item Weight | 227 g |
C**L
unable to download software
this product did not function as software could not download
Trustpilot
1 month ago
3 weeks ago
