BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank

They work great!

Viene con todo lo necesario, fue muy fácil de instalar y sin problemas, muy recomendable.

Nice quality and very reasonably priced way to get started with a two keg system.REGULATOR is good quality and easily attaches to a CO2 tank. Good advice is to have some thin plumbers teflon tape to put on the threads to be sure there is no leaking. Bad advice would be to use a liquid thread compound, since that can be a mess to clean off properly when gas lines are taken off and put back on, making it more of a challenge to avoid leaks. CO2 is not terribly expensive, but it is not a nice surprise to find a keg at low pressure due to a small leak in a gas line. Have a spray bottle of soapy water handy to spray on new connections and see if bubbles are forming due to a small leak.COUPLERS/DISCONNECTS: Note that if you are home brewing and using "Corny" kegs with ball lock disconnects this is NOT the right kit. But if you are using the kegs most often offered by commercial breweries (sometimes called "Sankey kegs" with "D" couplers) then you are in business. The disconnects for those kegs have both gas and liquid lines on a single coupler/disconnect which goes on and off the keg quickly and easily. If you ARE using corny kegs, then you can set these couplers aside and easily add a ball lock disconnect to the end of the gas and liquid lines instead - with the bonus that you now also have the right coupler if you ever do want to get a keg from a brewery (which we eventually did).Also, FYI some directions have the rotation of this coupler reversed, so just pay a little more attention when you are putting it on a keg and it should be pretty clear which way to rotate it to tighten it down. Only needs about 1/4 turn.FAUCETS: The faucets/taps are decent quality, and could be used on a keezer or kegerator (our approach).GAS AND LIQUID LINES: the lines are good quality, but frankly we prefer a narrower diameter liquid line to moderate the beer flow slightly to avoid pouring at too high a flow with too much head. Also, FYI, since these faucets are not spring loaded you will want to pay attention as you tap a beer and not assume it will shut off on its own when you let go of the handle. This is actually pretty standard, but just be aware.

Items in kit were awesome but wrench was missing. Emailed customer service and they replied promptly. Compensated me for the wrench which was excellent on their part. As you see, I didn’t go through the door but the wall. All in all great kit!!

I purchased this kit a few months ago now., installed into my home keezer.The taps are nice and pour well. Everything is really solid.I have run several kegs through it, and cleans the lines after each keg, and everything is holding up wonderfully.The regulator works great, and having a built in release is really nice.I would definitely purchase another tap set from Bacoeng without hesitation.Would highly recommend this product.