Single-Stage HVAC Vacuum Pump, 4.5CFM - Ideal for AC Repair Tools, Car AC Vacuum Pump, AC Vacuum Pump Kit, and Recovery Machine HVAC - Also Known as Bomba de Vacio A/C (TA450)

I had no issues with the pump. It sucked my honda civic system down to-30 very quickly.Ran pump for almost 1 hour straight with no overheating or cutting out. I will say it was 50 degrees outside when I used it.Pump makes some strange sounds when running however it did a great job. After 10 minutes or so the pump was not putting out any mist. The way I understand the manual once mist stops them moisture should be out of the system.The oil that's included was a little more than needed to fill the pump so I have extra if ever needed.Good pump for the occasional users.

So I had to get a vacuum pump that can handle multiple jobs and not have to worry about it being able to handle the work load.So I have read a lot of reviews on this pump and said let’s give it a try, so I did and it worked great for me.Just one big problem with this pump is it just keeps leaking pump oil all over the place and I can’t find where it is coming from. I checked the drain plug and the mounting screws (pump housing to the motor) everything was tight.. so I have looked at the sight glass and had noticed that the level had dropped by about 1oz or so.I am going to send it back only because it just keeps leaking oil. I know that some oil blow by is normal but not after use and cleaning it up and putting on the shelf clean and dry only to pass it by on the shelf and noticed that it was leaking oil all over the place.Maybe the company should concentrate more on quality control and making sure that before the product leaves that everything is good to go and the company’s website is a bust!! No proper links to get help or to be able to get replacement parts it just says return to place of purchase..Likes.Great pump for the price.It’s quick and easy to use and can draw 30 in of vacuum on my manifold not connected to anything and get around 28-29in of vacuum when connected to the job.Starts quickly and runs pretty quite.The inlets 1/2 in acme and the 1/4 in flare on it make it easy to adapt it to your own needs.Dislikes..It keeps leaking oil all over the place where it is coming from I cannot see just where it is coming from.All and all the pump is a great pump for the price..

I've been using this pump for a few years primarily on vehicle AC systems. It has held up well with regular oil changes. HOWEVER, the best vacuum I can pull is 130 microns with a CPS VG200 connected directly to the pump. While anything under 500 microns is considered acceptable, the rating plate on the pump claims to be able to pull down to 37.5 micron (5pA).It does the job to get well below what is considered acceptable vacuum in the automotive and residential HVAC industry, however it would be nice to have a specification plate that is actually true. I'll ding a star for that, but have nothing else negative to say. Decent little pump for the money.

The pump arrived on time, and as usual was well packaged. It has only been able to pull my empty vacuum chamber down to -25.5 Hg, but that may be due to my lid seal. I plan to change out the lid seal and retest the vacuum pump. The pump looks good and quieter than I expected. When running, it does produce a very fine mist from the exhaust/oil fill port. I’m told this is completely normal.I’ll post a more in-depth review once I change the lid gasket on my chamber and do a few stabilizing batches.This will be the more in-depth review of the Kozyvacu TA350 after using it numerous times.I have been using it to pull vacuum in a 4”x12” clear PVC vacuum chamber that I built for wood stabilization. During my first runs, I thought this pump may not be able to do the job as effectively as I had hoped. I’m happy to report that is not the case. I’m not sure if it was the crazy Oklahoma weather conditions, the refinements I made to my chamber, or a combination of those, but I’m now able to pull vacuum down to -30 Hg, which is what I’m told is nearly perfect vacuum for the wood stabilization process.Not only does this little vacuum pump seem to be operating better with time, the fine mist I mentioned has stopped. All in all, I’m very pleased with this purchase, and would not hesitate to buy this same pump again. For less than 60 bucks, delivered to your door in a couple of days, this vacuum pump is the “Deal of the day” for anyone like myself who would rather build their stabilization system than buy a complete setup.

I bought this as a backup vacuum pump for my Harvest Right freeze dryer. The pump failed and I replace it with another Harvest Right pump. That pump failed after two runs and was returned. So, I put the Kozyvacu pump into service. It's worked like a champ ever since. I did have to run to Napa to get fittings to make it work with Harvest Right. The new fittings required removing the check valve which means you need to operator the Harvest Right the way you would if the HR vacuum pumps check valve fails (which is a very common occurrence).Pros:1) Price2) It works. It gets a small HR to 500mTorr in 4 minutes and a medium HR to 500mTorr in 8.5 minutes.3) It's much lighter than either the JB or HR vacuum pump.Cons:1) No check valve2) Draining the oil for filtering is messier than with either the JB or HR pump.3) It vents oil vapor on startup. Less than my JB ever did, but more than an HR pump4) You must buy additional fittings (Napa has them for $12)5) Works on both my small and medium HR freeze dryers.I don't know how long lived it will be but I'm about 6 months into owning a HR (a small from HR and a medium that was a derelict I found on Craigslist) and I’ve gone through 2 vacuum pumps. The JB with the Craigslist machine was a basket case to begin with, the new HR is still functioning but a backup HR I bought failed after 2 uses. I’m happy with how the Kozyvacu pump works, but it’s not perfect and requires a small amount of disassembly to add the correct fittings. But otherwise it’s a great value and seems robust so far.