Electronics-Salon D-1188 24/20-Pin ATX DC Power Supply Breakout Board Module

Great build quality. Everything is labeled nicely. High quality terminal strips. Really fat traces on the bottom of the PCB. Also silkscreened. Really well thought-out. Would definitely buy again if I needed another.

I have used several of these little breakout boards and they really get the job done well. I was in a hurry, so just grabbed whatever cheap material I had laying around and did a quick assembly using wood and plexiglass for the case. Amazing how a simple breakout board can transform an older ATX power supply into a powerful 12 volt bench power supply. I only use 12 volts, but you can also hook up the 5 volt and the 3 volt lines too if that is what you need. Never had a problem with any of these breakout boards and several are still in use to this day after 3+ years. I have used these breakout boards in various applications: CB radio Amateur radio Linear amplifier RV 12 inverter RV electric jack power supply And the list goes on and on and on! BTW, depending upon which ATX power supply you are using, the power coming out of these units is exceptionally clean. No splatter or harmonics, etc. I have had a linear amplifier pulling 30 amps at 12 volts through this breakout board and it had no problems at all even after hours and hours of use. Disclaimer: Do NOT attempt to assemble or create a bench power supply using an ATX computer power supply unless you have lots of experience and know what you are doing. And NEVER open the cover an ATX power supply unless you have lots of experience and are at an expert level. High voltage can kill you!

I'm using one of these boards to power a Peltier thermoelectric cooler, and so far it's worked great and is very simple to use. I look forward to utilizing this for a number of future projects. Pros: They weren't kidding about 24amp rating, both the screw terminals and the connecting solder on the bottom appear more than adequate to handle 24amp loads. Overall the board is very well constructed and easy to use. Cons: It doesn't come with any standoffs and the connections on the bottom of the unit consist mainly of thick, exposed lines of solder that could be prone to short out if left directly on a conductive surface. This isn't so much a criticism of the product itself (there probably isn't a better way to make this that would avoid this issue), but anyone looking to buy should know that you need to have some way to support the board so the contacts on the bottom don't come into contact with a conductive surface (in my case, I just 3D printed a simple cover for it which solved the problem). Suggestions for the manufacturer: It would be nice if there was a version of this (or perhaps a separate, standalone product) available that also had connections for PCI-E power and/or Molex/SATA power. For my uses I need mostly 12v connections, but a standard 24pin ATX connector only has two. Overall great product, and would definitely recommend for anyone who needs an easy to use breakout for an ATX power adapter.

Provides Breakout of ATX Power Supply. I used this to turn a 600 watt power supply into a bench top power supply for tinkering and testing electronics. For the price, it makes it simple. It will prevent you from having to cut and trace wires. It is labeled and provides screw terminals.. Works great providing 12, 5, or 3.3v DC power. The possibilities are endless.

I've used this a few times to verify power supplies, and to power ESP based devices(ESP8266 & ESP32) for testing. All the breakouts are clearly labeled, the power button works perfectly with a satisfying click, the LED lights up when the PSU is energized. It would be nice if it came with a case but for the price I can't complain.

This ATX breakout board provides all the outputs I need in a nice, easy-to-use package. It works flawlessly each and every time. I'll be getting another, but this one is going into permanent use in a power supply project. I combined like voltages (12v, 5v, .3.3v) into respective terminal blocks (with a ground block of course so I can have a 3 output, metered supply. I installed 8-amp fuses on each block. And yes, I checked to verify that my power supply (and nearly every other one made) has common rails. It's always good to have a spare which is why I'm ordering again. Fantastic product!

Makes use of all atx pins and pluggable for replacement power supply in future. Keep in mind it is a soldered exposed board so don't mount directly on metal or other electrically conductive surfaces

Needed it for a project, no complaints.

Works as advertised

Used for a virtual pinball machine

Ça marche pour moi!

Love the fact thats its just plug and go.

Exactly as described