Silent Quartz Clock Movement, Long and Short Shaft with Hands Battery Powered, Wall Clock Mechanism Motor Replacement DIY Repair Parts

I bought this to repair a carriage clock which had stopped. I liked the option of short and long shaft motors and in the end used the short shaft with numerous shims to hold it back from the face. The hands supplied were far to long for acarriage clock so ended up cutting the big hands down to stubs so I could use the fixings onto the shaft and then gluing the original hands to them. Clock is now working and keeping good time. A cheap way to repair an old clock. Plenty of options with multiple hands.

These are very thin. I ve had paper thicker! They bend very easily which isn't good as you have to press very firmly to get the hands on the mechanism. I had a set of hands missing. I was expecting a little better quality for the price. I ve brought very cheap ones before and these are of the same quality. I thought they would at least be strong enough to withstand the force needed to set them up. Its a shame. They do seem to work OK for now. The battery was quite a tight fit. There were no instructions but after studying the pictures I figured it out and whilst the pressure needed made it difficult. The setup was very simple. OK product but perhaps not worth the price and missing parts. Edit: I have since spoken to the seller regarding the missing part and a whole new set was sent to me as compensation for the trouble. This was dealt with and sent very easily and quickly so therefore I will be changing my review to 4 stars.

Good bit of kit and looks great, easy to install

This is perfect for any elec clock repair. Well made movements and the hands are super light and will work in any orientation. And you get two movements. Bonus.

I bought this mechanism to replace the motor in my 30-inch wall clock, but it turned out to be too small and under-powered for that size. The product itself seems well made and runs quietly, so I believe it would work perfectly for small or medium clocks (around 10–14 inches). I probably should have checked the measurements more carefully before ordering. I returned it, but I would still recommend it for smaller DIY clock repair projects.

Item arrived well packed. It was just what I needed to replace the mechanism in my broken outside wall clock. It was also considerably less than purchasing a new clock, which was still in very good condition.

I finally changed the mechanism on an outdoor clock that stopped working. This took quite a while as I had never changed a clock mechanism before now. The item does not come with instructions of any kind. I watched a few YouTube videos and managed to get a general idea of what should be done, but of course none where specific for this particular product. The item comes with several washers and I had no idea where they should be placed. I ended up trying to follow the old mechanism setup. Despite this it seems to be working fine so far and it definitely is silent! Please be aware that this item does not come with a weather proof back cover if intended for an outdoor clock. I was able to reuse the old cover although not an exact fit. Apart from the lack of instructions the item seems quite good so far.

Very pleased with these, good selection of hands, simpled to fit and yes, they are silent movement

die Uhr läuft zufriedenstellend und ziemlich genau. Zeiger sind sehr dünn und vebiegen sich bei der Montage sehr schnell. als Montagehilfe eignet sich ein Kugelschreiber sehr gut. Miene entfernen und dann erst testen ob der Durchmesser ausreicht. Wenn Ja, mit dem kleinen runden Loch die Zeiger vorsichtig hineindrücken.

It went like clockwork, no pun intended. It replaced my broken clock mechanism easily, and the whole process took about 10 minutes. It works better than my previous one. I’m very happy with it, and it saved me from having to buy a new wall clock.

Sostituito meccanismo a un orologio, vecchio, ma per me bello, con l altro meccanismo, (la confezione è doppia) , ne costruiro' uno anch'io......

It worked with a small kind of ambitious tweeking. Needed to space the mechanism back a tad more with spacers so hands wouldn't hit the glass on the clock. So far it's accurate and been running 3 months so I give it a tumbs up. It came with two mechanisms of two sizes in depth which were both different that the one I had and I made it fit. There are a few types of hands also if you want more charm on your clock. I will use the 2nd mechanism on another clock when I have nothing to do. This kit is good and has keep perfect time better than any clocks I have had. I took a chance with this kit and it worked. I bought like 4 clocks the past few years and most keep losing a few minutes a week or like 5 min a month so I'm very pleased with these.

The mechanism is quiet but installation needs some techniques. My clock has a concave glass cover and a Second hand. After a few of failed attempts (the hands won’t move and stopped working after half a circle), I had to compare the height the shaft between the new and old box, and add two washers between the box and the back of the clock to decrease the shaft in front of the clock. I ended up reusing my old hands to avoid having more variables to my success. Also had to make sure that the shaft is perpendicular to the face of the clock. Aside from missing instruction sheet, my other complaint of the product is the battery slot is extremely tight. If I had to do over, I won’t undertake this project as now I am not sure if my clock will ever be accurate again after all the fussing like bended the hands slightly regardless of all the care I took.