Nicpro 1.5 Gallon Deep Pour Epoxy Resin Kit, 2 to 4 Inch Depth High Gloss & Clear, Bubble Free Epoxy Resin for Craft River Table,Wood Filler, Bar Top, Coating Casting, Self Level 2:1

It works great!!

I have used this product many times and it's a great kit with everything you need. It says not to use in temperatures over 80F and I used it once at 85F and it cracked when it hardened.. Other than that I have had excellent results. In a recent purchase of two kits one bottle of hardener was yellow indicating it was defective. By the time I found this out (on the day I intended to use it) it was too late to return it or get a replacement. Open the box and check to see if the resin and hardener are clear when you receive it.

Easy to use

This resin works okay but I think it bubbles more that the other low viscosity resin I've used. Worse it takes two days for it to harden whereas the other hardens in less than half the time, This one is however cheaper. Also I found it harder to maintain color separation even when mixing after exothermic reaction has started. and by the time done curing a lot of blending has occurred

Great resin. Thin, easy to mix and pour, comes out crystal clear, had no bubbles, very very little detectable odor, and it a great quality resin

My favorite epoxy brand to work on my projects with. Always exceptional quality! Crystal clear, mixes very well, with minimal bubbles. I've been using it for a while now and it never disappoints.

This was my first time using deep pour resin. I did spray the mold with mold release first. I did demold after 24 hours. It was still a little bendy but after sitting for another 24 hours it was fine. I followed the directions and stirred slowly for the recommended amount of time. Yes, there were some bubbles but not many. I did let the resin rest for a few minutes, the bubbles came up to the top so I was able to pop them. I also poured slowly into the mold and my project turned out great. The stir sticks were nice to work with. I am very pleased with this purchase.

This is a deep pour epoxy so it says BUT it has more bubbles then any epoxy I've ever seen and I've tried a LOT of epoxy resin. It's brittle when cured and takes 3-4 days just for demold. Day 2 it was still liquid form and left bubbles on surfaces and sides of the piece and of course throughout the entire piece. Such a waste of money. It breaks once cured very easily if I was to hit it with a hammer it would fully crumble.. I've had many issues with this brand on other items but was hopeful that the epoxy since it's labeled EXPERT but it's not a good brand. If you want the worst epoxy resin on the market this would be it.