HAF 700 EVO

Everything in the case was up to spec. Lots of room for components with tons of versatility in mounting radiators and fans. Not too crazy about the LCD screen on the front panel but its a nice touch I guess. Would be better if it wasn't there to be entirely honest. Cooler Master's Master Plus software is kinda crappy and every once in a while the LCD screen goes black and requires you to launch master plus to sort of reset the LCD. Case is definitely on the heavy side and much bigger than my Cooler Master H500M that I had before this. So far I'm very happy with the aesthetics and cooling capabilities of this case. Worth every penny IMO

I have been a fan of Cooler Master cases for many years. Having built several personal PCs over the last couple of decades. So when I decided that it was time to build one last one (wife laughing in background) I chose the EVO 700. I was not disappointed. I has a huge capacity for any MB/cooler/graphics combo you wish to build and that's just the main compartment! A second compartment allows for your power Supply and storage drives. It supports a mix of 3.5, 2.5 HDDs or SSDs with a well designed tool less system that is sufficient for almost any use case from Gamer PC, Workstation or even as a server. My only personal con has to do with the mounting of the Power Supply. I chose an ASUS ROG Thor 1200W Power Supply which has an ARGB display area. Since the case is designed with a divider and the Power Supply fits in the lower rear right area of the case the display is not visible. There may be a mod to remedy this but I did see an easy solution for now and since I can monitor the Power Supply voltages and temps onscreen it is only a minor concern compared to all the advantages this case offers.

This is a great case with plenty of options and space for every size motherboard. If you are short on space then this case may not be for you. It is well constructed and compartment have removable panels as well as easy access for the filters. I purchased a Cooler Master case 11 years ago and replaced it with this one. There have been a lot of improvements and updates. I really like the way it is constructed and would recommend it to anyone looking for a full tower case. I would like a little better manual with this case, but it does work. Cables are easy to hide and connect, and it is compatible with just about any board.

I have always liked HAF cases and this one is by far my favorite amongst them. Tons of cooling options and an awesome front panel with some of the best RGB lights I have seen, the small round screen is great for showing all kind of PC related info and optionally gifs or still pictures, it does lag with gifs though, a 10 second animation might take twice the time to show. The case is roomy inside although it might still be unable to accommodate very thick GPU cards from previous generations. The HDD compartment behind the motherboard is nice but gets a bit hotter than the rest of the case, it could use some dedicated cooling.

Exceptional airflow keeps components cool, spacious interior fits any hardware, and the LCD screen is a unique touch. It is heavy : A top-tier choice for enthusiasts who want maximum performance and a striking visual design.

Built like a tank, spacious, premium. However, there are small things that add up to a disappointing experience. Normally, I wouldn't be so picky about such minor things. But I also don't normally spend $650 on a case. The fit for the seem on the glass panel near the top where the two metal plates meet at the front of the case form an "S" bend and don't join neatly together, causing them to overlap. This has an effect of making it look cheap and poorly manufactured. The grommets inside the case have a tendency to bunch up toward the center of the opening. Instead of them being firmly against the opening, they slide off. Everything in this case is tool-less. Except the main retention screw that you need to remove in order to take off the top panel. The top panel is the lynch pin, permitting access to the the rest of the case by allowing you to remove the side panels. You'd think it would be a retention screw on something this expensive. Not so. Hopefully you don't lose this one important screw that's effectively holding together your entire case. The glass inserts on the front panel of the case are exceptionally dirty, requiring me to use some window cleaner and microfiber cloth to get them to a satisfactory appearance. This is despite the many plastic peel films on each side of the glass inserts. In fact, it made the effect stand out more. Dirty and clean glass clashed, making the foggy glass apparent even from 5ft away, especially when lit. Even though this case is large enough to house an enitre smaller computer within its cavernous interior, it lacked enough width to let me use my noctua NH-D15 with both fans (one raised up due to ram) on the cpu cooler. I was honestly shocked since this case is all about airflow. How could you not let the premier air cooler fit in what is intended to be THE airflow case? All in all, I'm satisfied with my purchase. Sadly, Cooler Master decided to forgo the final 10% of effort required to polish this case to a masterful product and at this price point, it hurts a lot more. I've seen more attention to detail in cases 1/3rd the price. If it weren't the fact I had already purchased the case now armed with this knowledge, I would have likely gone with the lian li o11 dynamic and saved myself $400.

This case i used to build a workstation strictly for work. The primary thing the case needed to accommodate was radiators and you guessed it more radiators. This case delivered on that as well as a digital display smack dab in the front so your hardware monitoring can be done with ease. The biggest surprise of all had to be the master plus software that controls the lighting and iris display (which I personally use to monitor hardware temps). This is the only lighting software that I've come across that doesn't tax your CPU. Hats off to cooler master for this. Honestly all the other companies should come to them in this arena because it is damn near perfect software as far as I am concerned. The build quality and materials used to manufacture this case you will find are very high quality and justify its top tier pricing. There is not one area I can pick out and call flimsy or cheap. Now for the one major con I found with this case. There are absolutely zero knockouts for fill ports or drain ports. I don't know anyone who spends this much money on a case and doesn't plan on a water-cooled build. And I found even after stuffing 3-360mm radiators and 1-280mm radiator in this beast there was plenty of room at both ends of the case to implement this feature. So unfortunately for that reason I can't say this case is perfect. But if you don't mind drilling into a 650-dollar case then more power to you. But all in all, for throwing some scrap pumps I had laying around as well as some scrap pipe I am very happy with its ability to keep everything frosty and for that this case got 5 stars. if I could though I would have given it 4.5 due to the lack of knockouts for draining and filling ports.

item is as described except there was some screws missing two thumb screws for the power supply, one thumb screw for top cover, one motherboard stand off missing with scratches where man or machine errored during attempted install. customer service acted like i was being petty about wanting all the parts for my 500.00 case, not the best of attitudes. this is a awesome case shipped weight is 55 lbs. its a beast! software for lighting is an embarrassment to say a human wrote it. they should be ashamed. all that being said the case is the most solid case i have ever seen great construction material (re 55lbs!) i would suggest better quality control peroneal.

وماله مسكات تقدر ترفعه من الارض تقيييل بدون الاجزاء