Tamiya German Panther Medium Tank - 1:35 Plastic Model Kit 35065

I'll say more about the decals below but firstly: 1 A GREAT VALUE KIT: 1/35 tank with two figures for less than £15! 2 This is a fantastic kit to learn on, try out weathering techniques, learn to make zimmerit, or to upgrade your other modelling skills without breaking the bank 3 THIS KIT IS OLD (1969 stamped on lower hull) so don't expect slide molded barrels or photoetch, 4 It's the later Ausf A version of the Panther, so has the hull mounted MG34, modified Turret etc. appeared in summer of 1943 and saw service from ten till end of war with over 2000 made. I yu want the earlier D or final G, you will need to look elsewhere. 5 Figures are a little soft on face detail it also has elastic band type tracks (meh!) These can be replaced if you want to spend more money! 6 The model could be motorised with the right after market parts, as it has holes in the base of the hull for switches etc. and the upper part of the hull is designed to be removable. (Again, this is more money) Finally: 7 THE DECALS issue: I noticed that quite a few reviewers have complained about missing items from the Decal sheet, 3 items to be precise. My copy shipped from Germany and I would expect any unit markings or SS/Nazi symbols to be either missing or inked out. It is illegal to sell and display these types of symbols in Germany (ad a lot of other countries) and can lead to fines or even a prison sentence. All the other decals are there with options for 3 tanks. So, if that tiny yellow icon missing from the sheet is bugging you that much, just splash a bit of "mud" on the hull where the missing item would be placed and no one is going to know! Alternatively, buy some aftermarket decals! (More money) I highly recommend this kit, great fun and easy to build P.S. glue and paint sold separately ;)

I've been a 72nd scale plane builder for decades on and off, but 72nd armour always seemed to lack detail. Then i was bought a Tamya 35th Panzer 1. not the best tank but well detailed and a crew commander, yep I got hooked, 1:72 or 1:48 for planes but 1:35 for armour. I bought tanks, crew artillery and accessories for my stash for my intended massed diorama both German and British, should keep me busy a long time and all Tamiya, but Why? this kit explains as first to be built. Tamiya 1:35 Panther. Open the box, Instruction booklet in black and white is simple to follow . Decals are good with the only quible being as this kit came from germany all swastika markings were cut from the sheet, but few if any vehicles used them anyway. the kit itself comes as a one piece tub lower hull (this is an old kit originating pre 2000 and was originaly supplied with a battery motor to run the model on the floor, shame thats been removed. the hole in the hull floor is still present for the on /off switch and buying a new motor means the kit is relatively easy to motorize.). the parts for the upper hull are fairly detaile and buuilding was straight forward and I was suprised at the lack of flash considering the mold age. building the 2 part gun barrel required some sanding to remove the seam line and unlike some reports there was no noticable warp to the barrel, like wise for the crewman. the finish and paint is down to the modeller, yes you can buy after market resin and metal parts, but out of the box its a good enough kit. But what about those rubber tracks, yes you can replace them with single link plastic tracks BUT if you intend motorising, you need the rubber tracks, if not then the strething, painting and weathering of the rubber to look right is part and parcel of the fun of moddeling, make the best model you can out of the box ( if you need the aircraft recognition circle and swastika, a multi use stencil set is available seperately. If all the other kits go together like this I am going to be a busy but happy chappy.

In my experience, Tamiya make some of the best models around, and they have not been the cheapest, however, this Panther was very good value for money. At 35 scale, its a sizable model with plenty of detail for the money, so I'm really pleased I bought it have now just about finished it. Be warned however, it has a few reasonably serious problems that make it tricky to build in places, compared to some other kits. The main problem is the the instructions are not great, leading to the spare tracks not being right, and worse by far, the assembly of the wheels was a nightmare, the way they have been made with identical looking parts being slightly different was a disaster, without any enriching of the model. The rubbery tracks were too short and cannot be stretched because they snap, fixed by welding with a hot screw. The ropes snapped when heated and bent in hot water as instructed, infact the whole model was made from an unusual plastic, not the normal Tamiya material, quite soft yet brittle. The barrel was slightly bent and the top deck doesn't fit too well onto the hull. Nevertheless it's good enough unless you look closely. There's not much painting pattern info, i just did what i liked in the end, not to Bovington standard of accuracy, I need to re-paint the faces and that'll do for me.

One dislike here is that sometimes the assembly instructions are a little unclear in places. The other is with the tracks. The method in the instruction sheet for joining the tracks is to use a hot screwdriver blade to make a "mushroom" head of the 4 pins that you press through the end of the tracks to make the join. This is very unsatisfactory and the end result is that when you start to fit the tracks to the road wheels, the head on the "mushroom" easily pulls out. I resorted to joining the ends of the tracks using a needle and thread, simply looping the thread through the holes in the tracks and tying off. A dab of polystyrene cement on the threads stops them from unravelling. Otherwise this is a fabulous kit to build, with any number of moveable items, which shows that is is sourced from a Tamiya motorised kit originally. A nice feature is that the top and bottom halves of the hull do not need to be cemented together. There is a neat clip which allows the parts to be slid together and locked. This means that they can be separated, if required, at some point in the future. Great value for money and once finished and painted I expect my Grandson will be delighted. The first picture is partially finished. The second, completed and painted.

Easy build , typical tamiya good quality model

This is definately a good model project, and not just building, but painting it too, it is fairly complicated to build, and if you have some model experience that will help, parts are very detailed, and there is more to the kit that a simple plastic model, the wheels and tracks roll, and can be taken off, overall the quality is very good, and plenty of guides/videos online to help if you get stuck, this does NOT come with glue, I am using Humbrol precision glue, but I guess other glues of the same type would work, paints andf brushes would also need to be bought seperately, overall this is great value for money.

Old tooling... I think its from 1969. But a great price.

I brought this recently to alleviate lockdown boredom. I used to make models as a kid (many Moons ago) but haven't made one for a long time so was unsure how this would turn out. The kit is relatively simple and all of the pieces fit together fairly well until you get to the tracks which ended up being a bit of a nightmare, as they are one piece molded flexible rubber - they're hard to join together & mine came with one way too short to fit around the wheels (I ended up having to heat them both up in warm water to get them to the correct length). They also don't 'sag' correctly as a actual tank's heavy tracks would, so I ran a needle & cotton through the centre of the track above the second wheel back & tied it off around the wheel after pulling the track down to get it to sag (top tip, plus you can't see the cotton). I did this on a budget and don't have an airbrush to get that slick camo pattern, so went old Skool and brought some Humbrol Enamel paint - I guessed the shades so purists will probably scoff (ended up buying 63 Sand Matt for the base colour, 84 Mid Stone Matt & 160 German Camo Red Matt and some Humbrol thinners - all of which came from sellers on Amazon). Initial base coat went on in two thinned down coats & dried really well. Cammo was a disaster at first, but after working my mojo with a small brush & thinners I managed to feather out the edges of the cammo, and finished off with some very thinned washes of enamel paint, and drybushed weathering with some artists acrylics that I had hanging around (Pictures attached, I don't think it's turned out too bad). In a nutshell: Easy to build so not too scary for a novice (although tracks are frustrating). Basic, but nicely molded so responds well to weathering techniques. Good size, so not too fiddly. Arrived on time & well packaged.

El envio fue en el tiempo indicado. La maqueta tiene muy buena calidad como es lo normal en los productos de Tamiya, aunque los moldes sean antiguos.

Excelente, es lo que pedi

Very Good!

Conforme à la description.

Excelente