Damoyar LED Light Glass with Temperature Sensor Hydroelectric Power Waterfall Bathroom Sink Faucet Basin Mixer Tap Brass Fitting

Installed in a cloakroom sink, looks good and the led’s work very well.The downsides are it’s quite chunky and when the flow of water is low then the water runs back underneath the spout and goes everywhere. I think the angle of the spout is too shallow. I’m going to try and modify to stop it or it will end up in the binEdit - I’ve added a 5mm triangular section of Perspex bar under the spout at the lowest end and it acts as a drip strip to stop the water running back under the spout.

This product did not work as described due to water pressure issues. Since installation I have researched the issue and I now doubt if any tank-fed system, no matter how large the head, will ever meet the pressure required to make any hydro-powered LED tap (including this one) operate correctly. Battery-powered units are available, and I have ordered such a replacement. Since posting this feedback I have had a positive response from the seller, who has agreed to make the product description clearer, hence the amendment to this feedback.

The colour effect is great but the design allows water to sit in the funnel when the tap is switched off and it does onto the basin edge. I wouldn't recommend this item if you have hard water because the lime scale really shows.

Product is good bit when water level is low in terms of pressure water falls back.I will speak to provider to address the issueThe inclined angel is not very good only 15-30degree as compare to stander base. Bottom is also flat not as in pic

It's very nice. Children love it and are excited about it. But I feel it's too tall and is more suitable for bath not for basin. Also we need to turn the water on full pressure otherwise water will run back down the tap and there is always some water gathered at the point where tap seats on the basin.

I’ve owned this for over a year now - had some difficulty trying to get hold of one from Amazon due to lack of stock but eventually got lucky and managed to bag one.The quality is good and it’s still going strong without any issues. If you have low pressure I wouldn’t recommend it as it’s the pressure/flow of water that runs the light. The water will also dribble if the pressure isn’t strong enough.The other benefit is that I don’t need to turn the light on at night if I need to quickly wash my hands, thus helping my electricity bill.All in all a good purchase for my first ever LED tap.

Nice Tap good quality, It arrived promptly and well packaged, I only got to install it yesterday, Installation was easy if you have basic Diy abilities, You just have to remember that the micro water pipes or at least 1 of them have to be fixed once the tap and fixings are part assembled through the basin, depending on your basin you may need a very short 11mm spanner and an extra pair of hands to keep the tap set while you fix the pipes and retaining nut.operation of the LED works well as described even with the water pressure turned down (shallow sink).happy with this product.

Quality tap and well worth the money. Easy to plumb in and looks very stylish LEDs work well and no squealing from the tap. It was easy to order and track and it arrived when the supplier said that it would. I would reccomend using both this supplier and this tap and will use the supplier again. Previously I ordered a cheaper battery operated Led tap from another supplier. BIG mistake. Tap squealed even after reducing the water pressure. Then the LEDs failed and had hastle with that supplier. It just shows that you get what you pay for.