T-AC03 Access Control Keypad, Door Access Keypad

This is a solid functional unit. Very robust and very clean when installed. I fitted this to replace an old Domino unit that was just old (at least 23 years) that failed. It had worked well but just looked old fashioned. The new unit rather than work of batteries needs a 12 VDC supply but is very low current so a piggy backed of an existing security camera power supply. For me the garage door control only needs a momentary contact and the unit provides a normally open and normally closed contacts for magnetic looks etc. It does provide a bell function and a Wigeand Output which is a more secure option but I did not use these. Also up to 2000 users and RFI key function. I have one user so only one number. The electronics are solidly cast so I believe will be water proof. My one criticism is that the multi coloured wire is only 100 mm long. This means that you cannot put the wire through a double brick wall into a JB. Single Brick may be OK. Luckily the unit I was replacing was fitted to the 75mm wooden door frame but I bought a very shallow jb that would fit sideways inside the door frame and clear of the door. You do only need 4 wires for what I was doing (+12VDC, 0VDC, Com and NO) but I like to bring everything to a terminal strip. The wire is very think so you should put ferrules on the end. In theory with the installation I have, someone could break the unit of the wall or unscrew the tamper resistant screw that holds the keypad to the cast box, and then connect the right wires together and open the door! Firstly you would have to have the right screw driver or you would need a crowbar to remove the whole box. In my case, with the short wires mentioned, any sort of removal of the key pad would probably put the wires out of the terminal block inside. Also the mentioned camera looks directly at the key pad area so I feel this is secure. However, for a more secure requirement, using a separate Wigeand controller would work well. It would be nice to be able to program the keypad to only light up when the first key is pushed as it does stand out in the dark. Overall a very nice unit and cheaper than replacing just the Domino Key Pad

No negatives, only positives... Setup and installed on outside gate with ease and programmed the key fobes no problem. I even managed to programme a credit card access keycard I use on my front door. So happy just to use one card for gate and door now.... HIGHLY RECOMMEND..!!!

Bad side is: Instructions are so small, that even with a magnifying glass its difficult. I could not program it for a few hours, even by following the instructions and videos. Thanks to my wife she did it in the end. The good side is: it is sealed in side to stop damage from water. It seems to be very solid metel. Once you get past the few problems, it is good, and works well, and I like the blue back light. My other one was a different make and stopped working after a few months, but thanks to the amazing service of Amazon, they gave me a full refund. So I hope this last's at least a year or two. I will be back to let you know if it stops working. If you don't hear from me, then you know its still working. 25/March 2023.

Arrived in good time and looks the part, heavy construction and seems like it’s built well Easy to program and worked like a dream Only installed so no longevity rating

This was added to the electric gate rams I bought, now I can give the code to the cleaner

Be careful when purchasing the unit. I purchased this because it was identical to the gate keypad I needed to replace, or so I thought. It looked and appeared identical it was only after fitting and connecting it up that it would not power up to the 24v supply. I then discovered the new keypad was designed soley for a12V supply hence why it would not power up on the 24V gate supply, the original was made for a 12-24V supply. 24v is needed to operate an electric gate, 12v is fine if the unit is used as keypad to operate an entry exit door. I cannot understand why the company that makes this in China would have changed the voltage from 12-24 to just 12v only supply. So check the back plate before fitting that is made for a 12-24V before it is to late to return, if using it on an electric gate.

New out of box but proximity doesn’t work and no way to contact the seller.

I like these. Seem to be well made and sealed (potted). Work with the fobs I already had and easy enough for those who need to use it and set it up - and that is quite something!!

Nackdelen led-en blinkar hela tiden !

Duidelijk handleiding, mooi om te zien, stevig gebouwd

Commande,payement,livraison,que demander de plus.

Kurulumu kolay ve elinize aldığınızda kaliteli hissi veriyor. Elektrik kesilip geldiğinde güvenlik için şifreyi üç defa girmeden kapı açılmıyor.Tavsiye ederim.

Funciona correctamente. Se ve muy bien aíslada la electrónica.