Pachmayr

I have tried several grips for my guns and this is by far my favorite yet. So with the SD9 VE I found that the grip on the stock frame is just not very good. I hated the really sharp textured front and rear of the grip. I tried Talon Grips and they just have a hard time sticking and staying on the rear of the grips due to again that really odd sharp texturing they did so I took them off. Next I tried the Hogue grip which is a nice grip but it takes a good 20 minutes of slowly getting that thing on and after I finally did I found that it added a lot more width to the handle than I really liked and the rubber is a lot harder than I thought. So that brings me to these grips which really did the trick for me. These added only a small amount of extra profile while providing a soft rubber feel that really improves handling and will take a little shock out of the recoil. I liked it a lot so I tried it on one of my other guns just for fun and it actually fits even better on my Canik TP9sf which has the same frame as the TP9v2 and probably very similar to the TP9sa. So if you have one of the Canik TP9 series guns this grip fit mine great but note I am using the larger backstrap on it but I would imagine the smaller backstrap would still fit the grip.

This was easy to put onto the SD40VE's existing grip, I unloaded and safety checked it more than one time, before using my knees to hold it in place (I'd read a table-vice would work, and better plus more safely, but I didn't have one available) and used both hands to slide it on. This is a great, comfortable grip, and not expensive at all. Also, I have large hands and fingers that don't always fit things, however with some minor adjustments to this grip's positioning -- my fingers still fit the grip nicely. 5 ☆'s!!! Also, please check out my video to see it after being perfectly fit onto a SD40VE, it would also fit the SD9VE perfectly as well! Enjoy with your firearm responsibly!! 😀 😁

I installed this grip on my Smith & Wesson pistol and immediately noticed a difference in my shooting. The textured surface provides excellent control, and my groupings tightened up significantly during my last range session. Recoil management is noticeably better—my follow-up shots are faster and more accurate thanks to the improved ergonomics. For the price, this is an incredible upgrade. The installation was straightforward, and the grip feels solid without adding unnecessary bulk. It’s comfortable for extended use but aggressive enough to prevent slipping, even with sweaty hands. Whether you're a beginner looking to improve control or an experienced shooter wanting better performance, this grip delivers. Highly recommended—it’s one of those rare upgrades that actually makes a measurable difference.

Nice grip, I only wish it stayed in place better. I've considered gluing it but I'm not sure if the glue would permanently damage the plastic frame of the gun. It stays in place pretty well but tends to rotate around the the grip. Their is no danger of it coming off the gun's frame. But it doesn't stay in one place very well. This was to be expected of course since it is a friction only fit. I might try some water soluble glue and see if that helps. As to the grip itself, it's a Pachmayr, about all you need to say. I have used their grips on almost every gun I own. I'm not displeased with this grip just removed one star for what I pointed out above. It's more annoying than in anyway interfering with the operation of the gun. And I'm not blaming Pachmayr. They did what they could with what they had to work with. Since my guns grip is molded right into the frame there is no attachment point to use. It is a huge improvement over the stock grips. Though be warned these guns have large grips to start with so this does increase the girth of the grip surface. I have very large hands (X Large Glove Size) so it fits my hand well. Those with smaller hands may find this to be too big. Update: I'd like to point out the reason for removing one star. Despite what some people may think this isn't a target gun. This is a self defense weapon. The trigger is designed as such. And when your in a life or death situation you don't want to be thinking about anything but the problem at hand. Any kind of a distraction can mean the difference between living and dying. This is the reason I carried revolvers for years. They are the simplest weapon to use. No safety to think about, no mode to wonder what it is in (IE. cocked and locked, Safety On, etc.). I bought this gun because it is almost as simple as a revolver and it is faster to reload given the need to be completely concealed. With the right setup, speed loaders in the right place on your belt, you can actually reload pretty darn fast with a revolver. But in my state everything has to be out of site at all times. given those restrictions a revolver becomes a much slower reloading option. And of course the auto gives you more ammo before reloading is needed. Handy I suppose if your planning to miss a lot. The grip not being in perfect alignment is just such a distraction. Which is why I'll either find a solution or remove it. I'm sure there will be those that disagree with me, so be it. In my mind this is the perfect self defense automatic. Or as close as your likely to get. Assuming I find a solution to the grip movement, this will be a great addition to the weapon.

Easy instal on my s&w sdve. Looks decent and really increases grip

Encaja perfecto, envío rapido. Buen precio

マルイ製PX4でハンドストラップSにして使用。 正に吸い付くような、という表現がピッタリだと思います。エセロゴ隠しにも使えてグリップ力も増して文句なし！1度つけたらもうつけてない状態には戻れなくなります。 安定した価格で在庫いっぱいあったらなぁ…

モデルガンなので，フィッティングは全く重要ではありませんが，流石パックマイヤー素晴らしいフィッティングです．グリップ部がテカらないように保護するには良いと思い，購入しましたが，見た目もpracticalな感じでgoodです．

グリップ界の雄、パックマイヤーのグリップグローブシリーズです。 米国だと10～13ドルでお手軽に試す事が出来るとあって中々に好評な様子。 英文レビューを見る限り、特にPX4につけた人は絶賛してる感じがします。 やっぱりあのグリップ、実銃でも手の内が悪いようでして、 金はかけずになんとかしたい、という層のハートをガシッと掴んでいるようです。 私の場合、M92用に購入しました。 ちょうどリフレッシュしたばかりのWA・HWが転がってまして。 コイツときたら実銃用のグリップはすんなりと着かないんですよね。 シコシコ加工するのも悪くはなかったんですが、 オフシーズンの常で４丁の銃を同時進行で手掛けてると中々重い腰があがらん訳です。 その点コイツは被せるだけ、ですから「ま、物は試しで」と装着してみました。 まず装着後の見た目ですが、個人的にはガレージ感がでて好みです。 肝心の握りなんですが、なるほど、と思いました。 グリップとグローブの段差が親指を自然に誘導してくれます。 フィンガーレストとあいまって、良くも悪くも握りの形に誤差がでない。 おそらくミリ単位で毎回同じ。 固定箇所が毎回同じなら道具の習熟度は格段に進むのは道理な訳で、 10ドルそこらでこのメリットを享受できるなら、と思うのも自然な流れでしょう。 HOGUEとの違いをあえて言うなら若干ではありますが調整が出来ます。 伸ばしたり縮めたりベスポジを自分で探れる訳です。 でも、これ使用頻度が高い人達にはどーなんでしょうか。 実銃だと何らかの方法で固定しないとベスポジから絶対ズレるような気がします。 価格を考えると10ドル前後ならアリでしょう。 ノーマル信奉派から顧客を獲得するための呼び水としても悪くないと思います。 ただですねぇ… 92にはやっぱ太いんですわ、グローブっての。 私、手が小さいんで上記のメリットは理解できるんですが、 この太さなら黙ってHOGUEにします。 個人的にですが付けた現物を見てると凄く良いんですよ、美的に。 ケツがデカい女、いや、下半身がしっかりしている感じで。 この感じなんだろうなぁと思ってたらアレですね、ミロのヴィーナス。 モチロン、92に付けた比率が黄金比なのかは計測してませんが。