Silicone Snowflake Mold: Non-Stick Baking, Chocolate, Ice, Muffins & Soap⎟Oven-Microwave-Freezer-Dishwasher Safe⎟6 Cavity Mold⎟Ships from USA

I really like the way this mold turned out. I used it for cold process (cp) soap. My first impression of the mold was that the sides seemed thin and maybe flimsy. But there were no issues with the structural integrity when I poured my batter in. The only problem I had was that my soap batter was a little thick (I had some issues and had to let it sit for a few minutes in the bowl before pouring and it thickened) and this caused some bubbles and you'll notice in the picture where the batter didn't quite fill in the pattern.I think if you made sure it was light to less than light trace, it would work best. Also, after I cured it for three days, I froze it overnight before unfolding it.

Love this. I wanted to make snowflakes to decorate my daughters birthday cake and cupcakes. These were perfect. I bought a few bag of candy melts to melt and pour in them. Popped them in the freezer for 10-15 and they came out great. Ps only pour a little in to cover the bottom bc these are deep cups!! I made the first batch way to thick and re did them.Disclaimer: I did not receive any sort of discount for this review although i wish i had lol. But this product is definitely worth it!

These snowflake molds are absolutely wonderful! I used them to make soaps for Christmas presents and I had to make approx 50 soaps for my friends and family members. This mold was extremely easy to use and when it came time to take the soap out, they came out easily with a very crisp/distinguished design. I've used generic hard plastic soap molds in the past and those were a nightmare (had to wait forever for the soap to set enough to remove, soaps came out crumbly or in pieces, the mold was extremely hard to clean, etc) and made me regret ever attempting this hobby. This mold changed all that. I made a ton of soaps in a short period of time, clean up was exceedingly easy, the mold is still in perfect condition after that big job and the finished product was absolutely lovely. I would buy this mold again in a heartbeat.

This mold worked better than I expected it too. I like to make handmade soaps and I poured some cold-processed white soap batter into these and let them sit in the freezer for a couple of hours. They un-molded nicely with a lot of snowflake detail. I was kind of expecting them to stick or break or not have much design but I was wrong on all counts. I will be buying a couple more of these to make soaps to give away this Christmas. The bars (soap snowflakes) after removal weigh approximately 3.23 ounces each so they make a good sized bar. I won't be using this mold for hot processed since the mold is very flimsy and will collapse if I press thicker batter into it. But for a light trace CP soap batter it molds very pretty and detailed snowflakes!I paid $5.99 (including shipping). I see they are now priced at $12.99. I think that is asking too much for them.

Very happy with this mold. I've never used a silicone mold before so was a little hesitant to try it. I got this specifically to make chocolate peppermint snowflakes that I saw on Pinterest. It was so easy that I couldn't stop! The mold is quIte thin, but it held the chocolate well. I was really surprised at how easy it was to get the snowflakes out of the mold. None of them broke or chipped at all.

These are awesome. I made a trial run of the chocolate snowflakes and they turned out beautiflly. I let the mold cool as directed in the fridge. I noticed that one was slightly less chilled and it wasnt ready to unmold (too soft). I put the mold into the freezer for a few minutes and that did the trick. So professional looking! I used crushed butterfingers instead of candy canes because that's what I had around. Delish!

I purchased this mold to make peppermint bark for the holidays. They turned out so beautifully!!! Since I was using chocolate in the molds it was so easy to get the chocolate out. Since the silicone is so flexible, I basically just stretched and peeled it away from the chocolate. The molds came out pretty much perfect. If they weren't perfect, it was something I did!The only thing that was tricky was pushing the chocolate into the pointy corners. I would first pour in the chocolate and use a spoon or pick it up and tilt the tray to get it in the corners. But, the chocolate was too thick/cool to work that way. So, I would just pour in the chocolate, and it created this little chocolaty mound. I then picked up the silicone tray a few inches off the counter, and would let physics take over.. by dropping it a few times to let the chocolate spread flat.Also, a pretty obvious note, the snowflake design is beautiful on the mold!

This mold worked exactly like it was supposed to. It went beyond my expectations. I bought this to make decorative snowflakes for my daughter's 4th birthday and it was a good decision. Used it to make perfect decorations for the birthday cake. Melt 3 jolly ranchers in each mold in the microwave and when it cools there are perfectly formed snowflakes. The quality of the mold is perfect and I would recommend it to anyone wishing to make decorations for any occasion.

I post this review from my mom's account. She Offered me this mold for Christmas (I love making and making all sorts of crafts) and I love it! They are such high quality and what you place in it comes out perfectly. The molds also wash very well. I plan on making a lot in those molds, and the soaps i made for Christmas gifts, in a Frozen theme (sparkles and two shades of blue), came out perfectly and were a success. I look forward experiencing more with this brand. Heidi Lee really pleased me! Thanks!

Great mold! I used this to make chocolate "bark" for the holidays. The mold is very soft and flexible so it was really easy to push the chocolate up from the bottom and basically invert the mold to get it out. The size of the cavities is perfect for what I was looking for - I was worried they would be too large but they are just right! I wish I had bought 2 of these - I just might pick up another one soon.

It's fantastic! Great! I used it for my CP soap making. And, WOW!! It has the correct silicone thickness whereas (on the thin side), the soap comes out very easily. unlike many other molds that are thick and when one tries to take soap out pieces break off or get dented from the pressure one must exert to get soap out of mold. This mold is really great. would like to see and buy more molds from this company.There is no breakage of soap upon taking it out of the mold. My only regret is that I went back to Amazon to see if you have more molds like this but of a different design and I did not find any. I am ready to make another batch of soap using this mold just because it is so fantastic!!!!was trying to download pic but was unsuccessful. sorry!

Absolutely love this mold!! I am all about easy and fun. This mold is so easy to use and lead to almost no work except banging on the counter to get the air bubbles out!! I can't wait until after Christmas when I can make more!! I already made 18. Easy Peasy!!

This lovely snowflake mold is incredibly detailed and versatile; from oven to freezer, it withstands hot or chilled liquids, and (conveniently) is dishwasher safe, although it is easily cleansed by hand.I used this as a Panna Cotta mold; after lightly coating the cup insides with vegetable spray, I evenly covered every interior feature with a pastry brush, then blotted them with a paper towel to absorb any excess. Each snowflake unmolded perfectly with ease, beautifully displaying their intricate details.Creme Brûlée is on deck...

These worked out great for me as I was making peppermint chocolate bark this Christmas. Not once did the chocolate stick to the mold and ruin the shape and each piece came out with a high amount of detail. The chocolates looked great thanks to this mold. I have not tried baking with these so cannot comment on their performance in that way, however for my purposes these were excellent.

I love this mold. Sturdy, sides don't bow out. I'm very pleased with this mold. I used this mold for my Cold Process soap, preparing for winter gifts. The soap came out beautiful. The detail in the soap is amazing. I'm so impressed, every detail of the snowflake's edging came out of mold so easy. Will probably order another one, before Oct. in time to make more soap for Winter gifts. Would differently recommend to other CP soap makers