Octopus nozzle cleaner, print head cleaner compatible for Epson print heads with hose adapters (100 ml)

I used this to clean my Epson ET 7700, which had severely reduced print quality and was leaving black blobs of ink all over the printouts. I followed the instruction video and cleaned the inside of the printer with paper towels, and then ran the print head back and forth over paper towels drenched in the solution. I also cleaned the pad where the printer head normally rests with the solution. I repeated c. 10 times with fresh paper towels, as A LOT of black ink came out. When no more ink was absorbed by the paper towels, I tried a few printouts, and the quality was perfect. No need to disconnect the tubes and run the fluid through the print head.

But killed my printer the Epson workforce refuse to come back on so I had to bin it the stuff was strong.I cant blame the fluid I never got to see if it worked I smelt it was strong, it put the printer to sleep forever lol 😆 thats life it could I put the fluid in aa directed next day poof it was dead you gotta laugh if not cry forever.plus my first time trying to clean a printer too you win some you lose some I trying with a second hand printer now it might need the cleaning fluid who nows

Blocked black ink nozzle - Very straight forward to use (video on U Tube is great - do watch it first). Initially a bit worried as ALL colours stopped working after I used it (put several try prints through) and all checks showed everything correctly back in place .Cleaning print head (as suggested in another review) did not work for me SO then I just took out all ink cartridges ,ordered a print "cartridges not correctly installed" comes up because they are not there - reinstalled them switched power off/on -printer then primed itself (took longer than usual) then set going-perfect nozzle check and prints. Very happy have just purchased spare ink and didn't want it to go to waste.

The product was received promptly. Unblocking the printer nozzles is a fiddly and messy job and requires a bit of patience. The cleaning kit enabled me to restore my Epson ET-2750 to perfect working order.

Ok

I read the instructions, watched the video, and flushed my black ink print head (which was printing and missing some black ink here and there)…I ran a head clean test and the page of paper came through blank… I repeated and had no luck… I decided that maybe the head needed to have ink pumped back through, so queued 10 pages of pure black… at this point I noticed that none of the inks were coming through. Odd because I hadn’t touched the colours. Then the printer shut itself off and refused to power back on… so… I guess it’s dead, Jim.In all the product looked like it’d do the job, but whatever it did ruined my printer…

Have had my Epson WF3540 for over 6yrs in a recording studio printing thousands of pages of lyrics, sheet music and images. It has never missed a beat until recently the print quality across all colours deteriorated considerably. So, thought it was time to by a new printer until I saw Octopus Epson print head cleaner as I was browsing on Amazon. As my 3540 had been so reliable over the past years I decided to give it a go. To cut to the point, I followed the well explained instructions to clean the printer heads and without exaggeration my 3540 is printing as good as when it was first initially purchased across the whole range of documentation, media and photos. This great product (for the measly price of £15) has saved me literally hundreds of pounds. Very highly recommended.

I purchased this to clean the printhead on an Epson WF7610 which I use with sublimation inks on a CIS. The black, magenta and yellow were completely blocked but I decided to clean all four since I had the cartridges out and the machine set up to clean the other three.The instructions were easy to follow and everything I needed, except a couple of paper towels, was in the pack. I pushed just under 10ml through each head then replaced the cartridges. I printed a 5 page colour document to clear any residue before doing a nozzle check. The result was perfect and I've since printed about 20 mugs and some t-shirts with spotless colours.A great result and I probably have enough fluid left to do two more similar cleans.I'm delighted with the result and would buy this product again.

Ça marche!

Ce produit à rendu mon imprimante EPSON XP 700 inutilisable nutilisable nutilisable INUTILISABLE

Der Octopus Düsenreiniger ist eine hervorragende Wahl für alle, die nach einer effektiven Lösung zur Reinigung ihrer Epson-Druckköpfe suchen.Die Qualität dieses Reinigers ist beeindruckend. Er wurde speziell entwickelt, um hartnäckige Verstopfungen und Verunreinigungen in den Druckköpfen zu lösen, was zu sauberen und klaren Druckergebnissen führt. Die Formulierung ist schonend für die Druckköpfe, sodass sie nicht beschädigt werden.Die Anwendung des Düsenreinigers ist einfach und unkompliziert. Er lässt sich problemlos in den Druckkopf einsetzen und wirkt schnell, um Verschmutzungen zu lösen und zu entfernen. Die beiliegenden Anweisungen sind klar und leicht verständlich, was selbst ungeübten Benutzern eine problemlose Reinigung ermöglicht.Die Kompatibilität mit Epson-Druckköpfen macht diesen Reiniger besonders vielseitig und praktisch. Er eignet sich für eine Vielzahl von Epson-Druckermodellen und gewährleistet eine effektive Reinigung, unabhängig vom Gerätetyp.Ein kleiner Hinweis: Es ist ratsam, den Reiniger regelmäßig zu verwenden, um Verstopfungen vorzubeugen und die Lebensdauer der Druckköpfe zu verlängern. Es wird auch empfohlen, den Reiniger kühl und trocken zu lagern, um seine Wirksamkeit zu erhalten.Insgesamt ist der Octopus Düsenreiniger eine ausgezeichnete Wahl für alle, die ihre Epson-Druckköpfe effektiv reinigen möchten. Seine Qualität, Benutzerfreundlichkeit und Kompatibilität machen ihn zu einem unverzichtbaren Zubehör für jeden Epson-Druckerbesitzer.

Ha funcionado a la perfección, dejandome el cabezal limpio y desatascado, como nueva. Lo mas complicado fue el desmontaje de la impresora

Tout est OK