SABRENT Hard Drive Docking Station, SSD HDD 2.5 3.5 Inch SATA to USB Adapter, External SSD Enclosure Hard Drive Reader, Fast Data Transfer Hard Drive Enclosure, Tool-Free (EC-DFLT)

This works with all of the hard drives that I have floating about from various computers that I have had. This only works with 3.5” hard drives. Luckily I was able to access the data from my last computer. My previous Sabrent 2 drive version seemed to have given up the ghost. This item is a very good replacement to that item. Would recommend. Data recovery is fast with the use of USB3 connectivity. The hard drives don’t seem to get hot. The item is silent in use I suspect the flap that covers the hard drive deadens the sound. Good value for money. A compact and well designed item.

The docking station worked seamlessly with both my computer and the old drive I was externally connecting. It was very straightforward to install the hard drive in the dock, and I was easily able to fully back up 2 TB of data. The enclosure is sturdy, and I like the transparent cover as it allows me to easily see the drive that's inserted. Overall I am very pleased with this product as it performs as advertised and at a reasonable price point.

No issues with delivery as arrived in good condition and on time. On opening the box the item looked good, but the lid felt plastic when using and this I felt should of been metal or hard plastic. The item worked well when drives were inserted and used, with the speed being good, however the smaller drives were a bit tricky to release from holder but this could be down to my large fingers. I would still recommend this drives as made life easier swopping my drives except took a bit longer with small ones. Other than that this is an excellent product and well worth getting if you have extra drives you need files from but don't need sitting in your computer and as you do not need to use screws, just open lid insert drive into it then plug into a Usb port on you computer which makes it easy to setup, install and use. Recommended.

Well made and does the job.

I was so glad I'd backed up hundreds of totally irreplaceable photos when my old pc packed up. I could just connect the external hard drive they were backed up on to my new computer. What I then DIDN'T think to do (muppetry of the highest order) was back them up again! Subsequently the Iomega external drive they were on failed. My wife & I were devastated - photos of our grandchildren's earliest years, weddings, holidays, Christmases just gone. So much so that we contemplated sending the broken drive to one of those data recovery companies - although we know the cost is often enormous. I read up on the problem & wondered if the drive really was done for or maybe it was the power supply to it. An electrical tester showed the supply cable was fine. I'd discovered that the sealed (they are sealed - no screws - no easy way to open them) cabinet would just contain an interface & a standard SATA 3.5" hard drive. I thought maybe if I could get it out of the cabinet without damaging it, I could fit it in my pc but was told you can't. I didn't know about docks like this. As a last resort before shelling out hundreds of pounds for professional help, I bought this dock. After very carefully breaking open the cabinet on my "broken" hard drive I detached it from the interface card & (praying) slotted it into this dock. The dock powered up the drive immediately & within minutes had rescued all those precious memories. A wonderful simple device it connected to my Windows 11 pc faultlessly just as it purports to do. The best £28 I've ever spent. The drive itself is solid & well made of decent materials. Furthermore, not only has it got me out of an awful situation, it was obviously only the interface that had failed so the dock has given the 1TB Samsung drive a new lease of life for just £27.99. Suffice it to say I have created multiple back ups of my important things now! Whatever you need this quality product for, I'm sure it's simplicity of use & great results will impress you.

I have two of these - they don't look any different on the outside, but the main difference is on the board inside it. I'll get to that in a second. It's made of plastic which is to be expected, but actually looks quite nice. There's a cosmetic cover that lifts up so you can insert either a 3.5-inch or 2.5-inch drive, and said cover is translucent black in colour so you can still somewhat see what's plugged in. There's a small air gap but that's really just not enough for 3.5-inch hard drives, specifically models that spin at 7200 RPM. They get hot and fast, though whether that's a problem is up to you. You get a nice looking barrel jack DC power supply in the box along with a chunky looking USB 3.0 A to B cable, custom made with the Sabrent branding on each end. The PSU can deliver 2 amps, which is enough for a single 3.5-inch 7200 RPM hard drive. In the time that has passed between my first purchase and the second (about two years) Sabrent have switched suppliers for the SATA bridge that converts the SATA interface on the drive to USB 3.0. They went from a Micron chip to one supplied by VIA Technologies. No matter your thoughts on VIA, this is a good thing, as advanced power management now actually functions correctly and allows you to set the desired power consumption and spindown time. If you're into making these chunky storage devices consume less power when you're not using them, this is a godsend and possibly even a reason to replace a Micron-equipped model (if you have one of these) with a new one. Just to warn you, don't get too aggressive with the spindown time as constantly spinning up and down can significantly decrease a drive's life expectancy - WD Greens were known to die really quickly because of their default settings of about 3 seconds delay before going into standby. Overall, Sabrent have smashed it, this is the drive dock to buy. It lays flat so it doesn't put strain on the SATA connector when you have a heavy drive connected (and they ARE heavy, a 4TB Toshiba of mine weighs about 700g) and now supports APM. Well done.

システムのバックアップには最適です。排熱も問題ないと思いますが、最近は気温が高いのでそのへんは各自調整していくのが良いでしょう。なにより、引っ越しソフトウェアがダウンロード可能なのが良好。使いながらレビュー追加していきます。

Si vous retrouvez des vieux disques et les utiliser, vous devez les placer dans un ordinateur, avec cet appareil vous pouvez directement les utiliser , sans montage, il suffit de soulever le couvercle et de placer le disque et allumer. Les transferts de données sont rapides, il fonctionne à la perfection sous Linux.

Excellent drive bay

Ho acquistato questa docking station Sabrent per recuperare alcuni dati da vecchi hard disk che avevo nel cassetto e devo dire che fa esattamente quello che promette, senza complicazioni. ​Prestazioni e Facilità d'uso: La cosa migliore è la semplicità: è un dispositivo Plug & Play a tutti gli effetti. Basta inserire il disco (che sia un SSD da 2.5" o un HDD meccanico da 3.5"), collegare il cavo USB 3.2 e il PC lo riconosce all'istante. Supportando il protocollo UASP, le velocità di trasferimento sono ottime e stabili, ideali per spostare grandi quantità di GB senza attese infinite. ​Design e Qualità Costruttiva: A differenza di altre docking station "aperte", questa ha un design orizzontale molto stabile. La scocca è in plastica robusta e il meccanismo di inserimento è fluido. Apprezzo molto il LED di stato che indica l'attività del disco, così evito di scollegarlo mentre sta ancora lavorando. ​Perché sceglierla: È lo strumento ideale per chi fa manutenzione ai PC o semplicemente vuole trasformare un vecchio hard disk interno in un'unità esterna in pochi secondi. Non scalda eccessivamente e non richiede driver particolari. ​Pro: ​Compatibile con dischi da 2.5 e 3.5 pollici. ​Velocità USB 3.2 (supporta UASP). ​Stabile sulla scrivania e semplicissima da usare. ​Contro: ​Il cavo USB in dotazione è buono, ma avrei preferito fosse leggermente più lungo per una gestione dei cavi più pulita. ​In sintesi: Un accessorio indispensabile da avere nel kit di ogni smanettone. Rapporto qualità-prezzo eccellente, come spesso accade con i prodotti Sabrent.

To connect old drives to extract old data back. 3.5 and 2.5 drives are not an issue