PLA 1.75mm 3D Printer Filament - 1kg (2.2 lbs) (White)

I've tried several budget filament brands, but nothing quite meets the standard of AMZ3D so far. So far I am only printing in PLA so I cannot comment on their ABS, but the PLA is great - I've had no issues with the spools whatsoever. The diameter of the filament is consistent throughout the spool and I didn't have to change any settings from my other spools.Other brands have caused my nozzle to block on occasion but I haven't experienced this yet with an AMZ3D spool. They have a great selection of colours to choose from and so I decided to try this transparent blue. I was working on a project involving printing hex tiles for a table top game, and this filament makes for excellent water tiles! I highly recommend another of their colours - fluorescent green - for grassland tiles. Usually when I've used transparent colours in the past I wasn't too impressed with the end product, but the AMZ3D filament didn't disappoint at all. Prints well at 190C and the finished product looks great. I've now bought a spool of the transparent orange to try out next along with some of their regular black filament. I will review these once I have had the chance to use them as my printer is out of action until I have finished putting together my Lack enclosure. My next purchase from AMZ3D will probably be the wood or copper filament as I really want to try some of these more exotic filament varieties. Pros ------------------------- - Great selection of colours, I highly recommend trying the transparent blue if you like the look of it. - Consistent filament diameter - Prints well at 190C - Cheap!!! Cons ------------------------- I couldn't find a fault with this filament if I am totally honest. Especially at the price band. Review of the black & transparent orange filaments will be posted as soon as I have had a chance to test them.

I have now used about 80% of the 1kg and it prints really well. Does not matter .much what layer height of speed. Sticks well to the bed, does not string much. And print quality is really excellent, needed a magnifier to see lines on some of the prints. When starting a new print make sure you extrude a bit before starting a print as It retracts quite a bit overnight. It is nicely white white, it appears whiter than in the picture. Comes in a cardboard box and the spool is vacuum packed inside the box. Can only recommend and I will buy another one. Update: a year in and I am still using this filament in various colours. Never had an issue in the many it's I've used. Where others have clogged up or were inconsistent or stringy. Used white black blue and red. And am here to buy some more.

I ran out of black filament and went for this as it looked good and was reasonably priced. I’m really happy I did as this filament is great. It prints amazingly well, offers great bed adhesion and very little stringing. I’ve already prints loads of things using this and they’ve all turned out great. Even the mechanical scissor snake worked perfectly first time around. I put a little video of the moment I first tried it out. The filament also has a very good tolerance and passed smoothly through my Bowden tube. I would definitely recommend this to anyone looking a reliable and easy to use black PLA.

Purchased this filament to go with my Ender 3 Pro which I had purchased as a 2nd printer to tinker with. The quality of the filament is outstanding, and on par with the more expensive brands I use on my Prusa. The adhesion to my glass bed is 2nd to none, once I have levelled my bed. I am able to print with this at lower temps than my others 205 nozzle 50 bed. The reason the overall score was 4 and not a 5 is just that the winding of the filament onto the spool is not the best and appears to resemble a bird nest when looking. Luckily though so far, I have not had any tangles on this filament. When I have used this all up I will most likely try another filament of theirs as well. Definitely worth the money, if you can live with not being wound on spool perfectly.

Great PLA filament. Out of all the filaments I've tried, this is one of the best filaments. Great adhesion to base plate. No warping or shrinkage. I'm desperate to get some more, but everything is currently not available. I really hope they bring more in soon.

I've used quite a few different brands of PLA with various results, but I have to say this one is one of the better ones. Its got excellent layer adhesion and the finish is unbelievably glossy it looks like wet paint, it prints easily and i would like to compare it to a well known brand that say theirs is the best (rhymes with rich kids stink) it prints just as nice but better in the way that it doesn't smell as strong and seems tougher especially if sanding afterwards, I've had zero problem sanding this stuff where as the other brand clogs the sandpaper and just seems soft, I wonder if its why they boast about it printing at a lower temp. Anyway I'm not here to slag other companies off its just I feel the need to compare it to one of the most expensive pla's to say for me this one is better, nearly finished the roll and no tangles

After using more expensive brands of PLA for some time, I tried this on a recommendation online and I won't be going back! I've only tried the black, but I've used 4 spools of this without a single error or failed print. I've been mainly using it for large prints on my MK3, to trial the PLA, but the cleanliness of sharper edges at 0.2 is comparable to much more expensive brands, and I can't see it causing an issue on smaller, more detailed prints either. It is also remarkably smooth to the touch on flat surfaces, noticeably better than other low price brands I've tested. I wouldn't normally 5* something like this, I don't normally review full stop! But at this price I would be very surprised if I find a consistent better quality PLA and I reckon that deserves a review at least.

I am a 3D printing novice and picked up my first printer, the Creality Ender 5 Pro, last week. Since the included filament was junk decided to get something simple and relatively cheap so I don’t chew through good stuff while I’m learning. So far have had a number of successful prints with this stuff. The only upgrade made to my printer is a glass bed and at 75c, I didn’t have any trouble with adhesion with a brim type raft configured in Cura. I have the nozzle at 205c and haven’t had issues with clogging and is easy to remove from the Teflon Bowden tube fitted on this model. The benchy benchmark turned out well at 30% infill and 60mm/s print speed. I plan on getting more filament from this brand in the future and eventually venture to different filament types.

Some people want their rolls of filament to look pretty on the spool. This is not the spool to get for that. Since that doesn't actually affect how well this stuff prints though and it doesn't matter to me no stars lost. I bought this filament for a special project for some items we wanted in a Safety Yellow/Green style. Was making some signs for a sale that was going on while road construction was limiting access to the storefront. +Great color +Very even and no extrusion issues on any of my three printers +Well packaged +Consistent results, I printed about 60% of the spool already and have printed a lot of the same items and they are all coming out identical This was my first purchase of this brand of filament and I enjoyed using it so much I purchased 2 more spools in different colors. I will be purchasing this again to replace my almost depleted spool and will be offering this as a standard available color for all prints going forward.

There's not a lot of reviews on the Amz3d filament but I saw a post on one the big sites and the owner seemed to be participating (or someone with knowledge at the company) and answering questions. I don't have many questions (other then what's the color really look like and does it work) but I am usually swayed when people with a vested interest in their company make that kind of effort. At $16/spool, I bought brown and orange. I normally only use Hatchbox, so that's my comparison. The prints have been flawless and I've given the fact that it wasn't Hatchbox zero thought. I set it up just like normal (205/65 on PEI) and walked away. My first print was a go-for-broke 4 hour job. Printed the legs for the giant lego man off thingiverse and it was perfect. The brown is a nice dark color (I'll get photos up soon) and there were no problems whatsoever. Word of note... on a thin print there's a red/purple tint that shows through. I'm not sure what it would look like in say a vase or a something like that. I might print one just to see but the color might not as brown as intended. My parts were 50% infill and the brown is very much so brown. I haven't been paid for this review. I bought these spools with my own money. I hate that I even have to say this but with all the 'paid' reviews these days, I just need it to be clear. I'm not a 'measure the filament' guy but it passed the eye (and print) test with flying colors. I'll do a review of the orange soon.

半分くらい使いましたが特に問題なく使えています。 発色も綺麗だし安いし、良い製品です。 使い切ったらまた購入しようと思います。

Wow, what a pleasant surprise! The color is gorgeous in a deep, rich blue. My prints look absolutely amazing. I print this on a Monoprice Select V2 and set the temp at 65C for the print bed and 210C on the extruder, print height set to .1. The results are stunning! Hopefully, this company has good quality control and that their other colors print as easy and nice.

Looks good (unique color). The color was the reason that I bought it.