Digital Vernier Caliper, Electronic Calipers 150mm with LCD Screen | Precision Tool Micrometer Stainless Steel Caliper with Mm/Inch Conversion, Splash Resistant (IP54)

I don’t usually leave reviews, but I’ve been using this caliper for a few projects now and it’s good enough that I felt it was worth saying something. I bought it because I wanted to be more accurate with my 3D printing work, but I didn’t want to spend serious money. A Mitutoyo digital caliper which is top of the pile is around £110–£120 in the UK. This cost a fraction of that, so expectations were sensible. First impression was good. It’s stainless steel, has a bit of weight to it, and doesn’t feel like a toy. The slide is smooth and the little thumb wheel is actually really useful for creeping up on a measurement instead of overshooting it. Once you lock it, it stays put. Accuracy-wise, it’s been spot on for what I need. I checked it against a couple of known sizes and kept getting the same readings back, usually within about 0.02 mm. I honestly wouldn’t gain much by spending ten times more. The screen is clear, zeroes properly, and doesn’t jump around while you’re measuring. Inside, outside and depth measurements all work as expected, even on small holes where cheap calipers can be a bit sketchy. Is it as silky smooth or as refined as a top-end Mitutoyo? No. But it also doesn’t cost Mitutoyo money. For normal workshop use it does exactly what it should without getting in the way. If you’re a hobbyist, DIYer, or just want a reliable digital caliper without paying professional prices, this is a really solid buy. I’d happily buy it again.

⭐⭐⭐⭐⭐ I can't say enough good things about the Digital Vernier Caliper! When precision measuring is required, this tool is an absolute game-changer. First and foremost, the digital display on this caliper is incredibly accurate and easy to read. You can trust the measurements it provides down to the smallest fraction, making it perfect for any task where precision matters. Whether you're a professional engineer or a hobbyist, this caliper will exceed your expectations. The build quality of the caliper is outstanding. It feels solid and durable in your hand, and you can tell it's made to last. The smooth sliding mechanism ensures that you can make precise measurements without any hiccups or wobbling. One of the standout features is the ability to switch between metric and imperial measurements with just a push of a button. This versatility is a huge time-saver and eliminates the need for multiple tools. Plus, the auto-off function helps conserve battery life, so you don't have to worry about constantly replacing batteries. The digital Vernier Caliper is also user-friendly, even for those new to precision measuring tools. It's easy to handle and comes with clear instructions for calibration and use. In summary, if you need precise measurements, the Digital Vernier Caliper is an absolute must-have. Its accuracy, durability, and user-friendly features make it a five-star tool for anyone from professionals to DIY enthusiasts. Don't hesitate to invest in this caliper – it's a game-changer for any precision measuring task!

I did a review of this product on youtube and showed how I carried out various checks. Using a 50mm engineers block I checked accuracy and repeatability of main jaws 49.98 to 50.0 readings which are within spec and indicate pretty good flatness and parallel machining of main jaws. Inside measurement jaws were not so good - the flat faces have a gap meaning the measurment axis is not inline with the points of measurment, this is worse for small items. There is a 0.06mm difference between the main jaws (which you use to zero, and the inside jaws, which are therefore actually out of spec, the inside jaws are difficult to zero separate from main jaws (they don't fit in a hole that has no size). Depth gauge/step - this end face is quite crudely ground and setting this on the engineer table it is easy to measure that the "plunger" is 0.05mm short of the end of the body, unlike the inside jaws you can probably zero-out this error. I had to tighten two screws in the body that they had forgotten to do in the factory (under the label) and on delivery the slide section was a bit wobbly because they had not properly tightened the top two screws that adjust the slider friction. After doing this it made the faces parallel and it works pretty well. I was disapointed in the attention to detail in the manufacture but accuracy and repeatablity are ok for the main jaws. For the price it is acceptable and better than the budget devices

This tools provides accurate measurement, is nice and clear to read in any light, and looks well constructed. Powered by the included coin batteries there's no need to worry about recharging. The all metal construction is great as it sticks to a magnetic tool bar easily. The calipers were easy to operate adjust/zero.

Got to be the best £20 odd quid I ever spent, what a great buy, very useful bit of kit, well made, highly accurate, easy to use, digital read out, comes with plastic case to protect it, battarys supplied, well worth the money,

I only received it recently but I must say I am very impressed with the calipers. Jaws are closing flat without any light leakage with light test and it reads repeatedly 0 in that position. In general the reading can be repeated few times and the variation between them will not be bigger than 0.01mm which I attribute to jaws grabbing item differently due to the way I operate the instrument. Some users complained that the jaws are not precise. In my case they are perfect. Other complained that the batter runs down on its own as only minimal movement of the instrument will wake it up. This is not correct. At least not in my case. Yes the instrument is very sensitive but the easy way around it for storage is to lock it in fully closed position with a lock screw. This prevents calipers from waking up in transportation in my limited experience with it. I though that the screen will be the highlight - and don't get me wrong it is - but there is so many quality features about it that it just does not stand out so much even tough that it is amazing in how easy it is to read it and how big the numbers are. The precision adjustment wheel is a tiny bit loose but works really well and it does not impact the operation. The only downside I can think of and something that caught me by surprise is the added heft and weight. This is my first digital caliper, for past 20 years I was using traditional caliper which is a considerably lighter device. The increased weight on its own is not a real problem as such but the lack of balance it causes as it is accumulated towards the jaws can surprise and lead to dropping it to the floor I would imagine. It did not happen to me but it almost happened to me. All in all great buy. If you have found this review helpful I would appreciate if you could mark it as "Helpful" with the button below. Thank you!

I haven't reviewed anything for a long time, but this calliper is such a good buy, I have to say something! I'm starting to care about the accuracy with which I do metalwork. Callipers are one of the first measuring devices a machinist will need and so I did a lot of research. Mitutoyo is often regarded as the gold standard and their version of this calliper; their cheapest digital calliper in the UK, is 112 GBP; it costs seven times more than this Preciva calliper. For the DIY-er or hobbyist machinist, I reckon the Preciva calliper is every bit as good. Accuracy: I have two 'reference blocks': steel 'cuboids' with highly accurate dimensions and precise right angles. They are one of the best ways to check the accuracy of many things, including measuring instruments. This Preciva calliper measured my blocks to .02 of a millimetre, anywhere on the block. That's a guaranteed accuracy of two hundredths of a millimetre in your measurements, equivalent to the thinnest human hair. I don't need more than that! So it's accurate: good. And ... - Its 'frame' is made of stainless steel; this adds mass and dimensional stability. It also feels like a proper tool because it's heavier than plastic callipers: 'tool feel' is a thing! - The features built into it are pro-level and actually useful - The sliding gauge and digital readout can be moved up and down using the knurled part of the black plastic body, BUT using the small metal wheel allows you to move the scale much more accurately, even .01 mm at a time if you're gentle with it. - Then you can hold the slide in place by tightening the screw on the top of the slide. This is useful in ways you will discover as you use it. - using the often-rubbish 'inside diameter' jaws, I was able to measure the diameter of a 3mm hole I drilled with a cheap drill in my drill press. The diameter measured from 2.97 to 2.99 mm. Not only is that accurate, but I could measure such a small diameter with a reassuringly firm grip of the calliper on the hole. I suggest you buy this calliper. It has to be the best value for money calliper available on Amazon UK. PS: I hate Jeff Bezos!

It is nicely engineered and feels right in the hand. Slightly ‘left hand’ heavy but acceptably so. OUTSIDE MEASURING JAWS: On holding it up the light, I can see that the machining is perfect. The gap, when virtually closed is absolutely even. INSIDE MEASURING JAWS: This is always more difficult to check because you need to look through the gap at a slight angle. It does however appear that the gap is not perfectly even. It is less than a thousandth of an inch out, by my eye-ball, and perfectly acceptable for my needs. There is a very slight roughness to the measuring surface which probably accounts for this. The 'error' will soon be nullified by normal wear and tear, so it really is not of significance. STEP MEASURING SURFACES: The calliper stands on end absolutely square - so the step surfaces are precisely made. DEPTH MEASUREMENT: Absolutely flush with the jaws held closed - just as they should be. The slider is slightly wobbly in the body but that does not affect the accuracy. Better that way that stiff. IN USE: The jaws can be held in place firmly with the thumb on the bulge under the display. Ergonomically, it is just right. The fine adjustment wheel is indeed a proper working wheel and not just a dummy plonked on there to make it look good. The locking screw works easily without having to apply too much pressure. Full marks then to Preciva for the design and engineering. THE LCD DISPLAY: It’s big and clear but it does not work well in cold weather. Anyone expecting to regularly work in the cold would be better off with a Vernier calliper or a Dial calliper. The manual says 5°C to 40°C operating temperature and it was less than that when it was delivered so, fair enough, it didn’t work properly. Whether you turn it off manually of leave it to turn itself off, it turns itself on again as soon as you move the jaws - which makes the on/off switch almost redundant. If you are travelling with one of these it may be a good idea to lock it with the top screw to stop it turning itself on all the time and flattening the battery. Remember not to close it right up though or you risk straining something. CR2032 batteries are pretty cheap and they give you a spare battery as well as the one fitted when it arrives. With a bit of care, battery life should not be an issue. MY FIRST ONE WAS FAULTY: I noticed that when pressing the 'ZERO' button, the display always said '7.77' or ‘0.01’ instead of '0.00'. Measurements sometimes worked normally but in some lighting conditions it was all too easy to see the parts of the LCD that you should not be seeing - which makes reading it a bit worrying. Having realised that problem, I gradually opened up the jaws beyond my normal range and I noticed that there were a great number of random readings appearing. Far too many to be acceptable, so my first one had to go back. Fortunately, the replacement is a brilliant tool at a bargain price. ACCURACY: To test the Preciva, I measured three drill-bits (5.00 mm, 2.50 mm, 1.20 mm) with 5 different devices. I measured each shaft three times with each of the 5 instruments - i.e. 15 measurements of each object. The table below shows the average result in millimetres. (The table may not survive re-formatting by Amazon so read carefully). NOMINAL SIZE: 5.00 2.50 1.20 Vernier Micrometer: 4.957 2.508 1.200 These readings did not vary. Vernier calliper: 5.02 2.54 1.26 These readings did not vary. Plastic calliper: 4.70 2.30 1.10 Varied by 0.20 over three readings. Faulty Preciva calliper: 4.94 2.49 1.18 Varied by 0.10 over three readings. Second Preciva calliper: 4.96 2.50 1.19 Varied by 0.02 over three readings. The micrometer readings and the Vernier calliper readings were absolutely consistent. The Faulty Preciva and the £5 plastic digital calliper varied with each reading but the Replacement Preciva varied only very slightly… On the ‘5.0’ mm object it varied 0.02 mm On the ‘2.5’ mm object it varied 0.01 mm. On the ‘1.2’ mm object it varied 0.00 mm. The measurement ‘error’, if error it really is (probably is), is a maximum of 0.01 mm. All of those results are pretty damn good for a budget calliper! My Vernier micrometer reads '0.00' when closed right up, using the torque limiter. I would guess therefore that it is reliably accurate at these small measurements. On that assumption, the Preciva calliper is more accurate than the Vernier calliper(!) and it is of course much quicker to read than the Vernier calliper. Very rarely will I need anything more accurate than the Preciva and if I did, I would be using a micrometer anyway – so the Preciva is a bargain! CONCLUSION: It is a shame about the faulty LCD on the first Perciva but the replacement one is a gem. Highly recommended and well worth 5 stars at that price. The £5 plastic calliper result was interesting. It is the least accurate, as should be expected, but for most purposes, it is good enough. How often do you REALLY need to measure closer than 0.3 mm? PLEASE NOTE THAT THE PICTURES ARE OF THE FAULTY ONE. THE REPLACEMENT IS 'PERFECT'.

J'avais un pied à coulisse classique et quel gain de temps pour lire les mesures avec celui-ci. La précision est au top.

Super jakość

Voorlopig doet deze wat hij moet doen. Lage prijs afwachten na meer gebruik

buen funcionamiento y acabado perfecto , viene con una pila de repuesto

fungerar som den ska.