Note: For after installed medias or screens with RCA video input only, it is NOT for orignal Car media directly!You can add camera interface or adapter cable if want to use it with original media.Special Trunk handle CCD Car Rear View Camera Reverse Backup Camera Special for: Ford Focus Hatchback & Sedan 2012 2013 2014Ford Focus2Ford Focus3Ford Kuga MondeoFord Fucos MK3 2011-2014(The car models are for reference only,please check the camera size and car's brake lamp size.We have size picture but please allow 0.5-1 inch difference due to manual measurement.)Special Note! If E39/E46/E53/E90 etc.,some cars original is 3pin,need to modify.Remove original 3pin connect with our camera.(Our camera is 2pin of boot connector.) Important: it is not LVDS connectors output to original screen.It is RCA connector. So the camera don't fit car original screen.Technical parameters Images sensors CMOS: (PC7070) Power Supply: DC12V Current Consumption: 100mA(MAX) Power: 1.2W(MAX) Effective pixels: 648*488 Electronic shutter: 1/60(NTSC)1/SD(PAL) 1/10,000 second Minimum illumination: 0.5Lux S/N Ratio: ≥48dB Resolution(TV Lines): 580 TV System: PAL/NTSC Lens Angle(Deg): 170° Video output: 1.0vp-p,75ohm IP rating: IP67/68 White Balance: Auto AGC: Auto BLC Auto The product is easy installation and assembly, but Note: 1.This product is a 12V voltage. 2.When installing the product,be sure to use the specified drill,screws,etc. to avoid damage to the camera functionUnique Design:This backup camera is with Guide Line (Yes/No) Switcher. It is with Guide line as default. Remember to turn off the power before switching 1.If you need a backup camera with distance scale line,you just install it without any operation.2.If you need a backup camera without distance scale line,please cut the white wire
Trustpilot
1 week ago
4 days ago
