VFD Digital Phase Convertor 1.5kW 2HP 220V Single to 3 Phase

I have 4 of these operating pumps 24/7 365 since 2020. They are in a hot environment, so I have a 4" computer style fan laying on top of each controller drawing up to assist with heat management. The internal fan is probably not up to this task once the heat sinks become dirty after a year or two. Heat kills silicon, so it is well worth the extra $10 investment for an external fan. I am using external control of speed and also using another input as a safety fallback to keep the pumps idling at 20hz in the case of a blockage or other water issue. Make sure they are mounted vertically (as shown in the product photo) for proper airflow.

Works well on Bridgeport clone. I have it locked to 60hz because I’m using a Varispeed. The motor doesn’t see designed to cool at low speeds so I won’t be using variable frequency until I replace w good Baldor

Excellent product, very adjustable. Only issue was the poor translation of a poorly written instruction pamphlet. Other than that, runs my one hp South bend lathe just fine.

Pop smoked in under 30 seconds. I got the 1.5kw 2hp model. I adjusted the speed up to 120hz. The motor was running fine no load. Switched the display to amps and loaded the machine Right about when I reached 7 amps the motor slows down drastically and the vfd pop smoked. Dead to the world. Should have faulted out not let out the magic smoke. I took it apart and looked inside to see the area that vaporized was a strip on the printed circuit board that must have been too small for the intended load so the builder blobbed a snail trail of Solder all along the path from the imput terminal to the leg of the rectifier in a vain attempt to increase the ampacity. What a joke.

So far it’s running like a champ. I owned a 110v one so setting this one up was a little easier this time. YouTube has a lot of guides on setting these up if you need help. The one thing that really irks me about these is there isn’t an on/off switch you have to unplug it to turn it off or like me I wired a switch to it so I could turn it on/off without having to unplug it.

It works great. The user manual is in English and included in the box. The user manual is fairly easy to read and so are the wiring diagrams. Some of the explanations are not very clear so I suggest you google "Huangyang VFD set up" for more information, that's what I did along with reading the users manual and everything worked perfectly.

Worked great.

no problems, straight forward setup

HUANYANG VFD HY01D523B 1ph in 3ph out 0-220 vac 1.5Kw (2hp) 0.50hz- 400.0hz Output current 7.0 A Motor Leeson C184T11FB10C 3ph 208-230 v 60 Hz 2 Hp (1,5kw) FLA 7.2 SFA 7.8 Eff. 86.5% 6 Poles Notes: VFD Settings varies from a company to another Steps for programming the parameters. 1) Press “Program” 2) Press “Up” or “Down” arrows to get to the parameter you want. 3) Press “Set” to select the parameter for editing. 4) Press “Up” or “Down” arrows to enter the setting you want. 5) Press “Set” to lock in the new parameter value *Note: The “Shift” button changes the input position from right to left across the display. Parameter Value My Explanation PD000 0 0 = Allows VFD parameters to be adjusted 1 = Prevents VFD parameters from being adjusted PD013 0 8 = Reset VFD to factory settings (if necessary) PD001 1 0 = Start/Stop motor by buttons on the front of the drive. 1 = Start/Stop motor by external switch 2 = Start/Stop motor by computer communication port" PD002 1 0 = Motor Speed adjusted by buttons on the front of the drive 1 = Motor Speed adjusted by potentiometer (Onboard or external, jumper on “VI” for external or “VR” for onboard) 2 = Motor Speed adjusted via computer communication port" PD005 60 The maximum frequency that the drive will send to the motor. PD004 60 Rated frequency of the motor as listed on the motor's nameplate. PD003 60 The frequency (speed) the motor starts off at when PD002 is set to 0 . PD008 220 Rated voltage of the motor as listed on the motor's nameplate PD014 2.0 Time in seconds for motor to accelerate to full speed. PD015 2.0 Time in seconds for motor to decelerate to complete stop. PD023 1 0 = Reverse motor rotation not allowed. 1 = Reverse motor rotation is allowed. PD070 0 0 = 0-10V for external potentiometer Ref PD002 PD072 60 Higher analog frequency Same as PD005 (Factory set a 400hz not 50hz) PD141 220 Rated voltage of the motor as listed on the motor's nameplate. PD142 7 Set it to VFD max rating. F.L.A. (Full load amp) rating of the motor as listed on the motor's nameplate. PD143 6 Number of poles = 120(f)/n where f = motor's rated operating frequency (60Hz in the USA) and n = motor's rated RPM on the nameplate. 120 factor x 60 HZ divide by 1165 rpm = 6,180 rounded to 6 PD144 1165 Rated RPM of the motor as listed on the motor's nameplate.

Je ne m'attendais pas à recevoir cet article si rapidement. Bravo. Paquet bien emballé, bonne instruction, il suffit de bien lire tout le document avant d'entreprendre les connections. Très satisfait

Could not get to work