Guitar Strap Button Set Included Leather Headstock Strap Buttons Adaptor, 2 Strap Locks Safety Blocks and 2 Guitar Strap End Pins for Bass Ukulele Acoustic Classical Electric Guitars (Black)

Description

Specs: The leather headstock strap button adaptor is about 20cm long Screw is about 2.2 cm long The diameter of the strap safety block is 25mm and diameter of eye hole is 8mm with thickness 3mm. How to install strap buttons on a guitar or ukulele? A strap button can be install in most ukuleles or guitars in a few steps 1, Mark the desired location for the strap button on the body of the ukulele with a grease pencil. Ukulele strap buttons are generally installed in the tail section of the body of the ukulele, in-line with the neck of the instrument. 2, Drill a hole through the strap button mark using a power drill with a drill bit slightly smaller than the screw from the strap button kit. 3, Pass the included screw through the strap button and felt washer of the strap button kit. Drive the screw into the strap button hole with a power drill and driver bit until the strap button is firmly attached. Warning Do not use wood putty or other chemical fillers or adhesives when installing the strap button. Altering the original wood of the ukulele can lower the instrument Headstock strap install instructions: 1, Simply slide the leather strap button adaptor beneath the strings above the fretboard on your guitar. 2, While the button is still open, slip the guitar strap over the metal button. 3, Close the strap button by inserting the metal button into the slit on the other end of strap button. Package include: 1x leather strap adaptor 2x strap locks 2x strap buttons 2x felt washers 2x screws