How to use this paint less dent repair kits? 1. Clean the dent with a clean wet cloth. 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes. 3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is) 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue) 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 5 minutes. The cooling time should be less than 7 minutes and should be shorter slightly in winter).and into the tabs. 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent. 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen. 8. Clean the repaired place with a clean wet cloth. Packing List: 1 x PDR Yellow Bridge Dent Puller 24 x Glue Tabs 1 x Hot Melt Glue Gun 2 x Yellow Pro Glue Sticks 2 x Black Pro Glue Sticks 2 x White Pro Glue Sticks 2 x Rubber Scraper 1 x Alcohol Spray Bottle 1 x Black package bag 1 x Dishcloth 1 x User Manual 1 x Mini T -bar Kindly reminder: If it is still unreined although you have followed up the above steps, then you could repeat the above steps a few times more until repaired . NEW DESIGN FROM SHITONGDA– Yellow Bridge DIY dent puller with 24 pcs glue tabs for car dent removal and car door ding paintless repair.TIME SAVING – Dent Tools Can be offered on your service drive or on a mobile basis, making it convenient for customers.Ps: If it dents area more than 9cm/2.9inch, please try using slide hammer / T -bar.
P**N
Prior to trying that the top of the plastic nipples broke off whilst using the bridge puller/ Would I buy it again NO would I recommend it NO
rubbish. plastic pads kept coming off even after applying glue over the top .Prior to trying that the top of the plastic nipples broke off whilst using the bridge puller/ Would I buy it again NO would I recommend it NO! .Only good part was the hot glue gun and that wasn't much good .only had 18'' lead with a euro adaptor which kept coming unplugged .RUBBISH
G**O
Surprisingly good
Surprised at how well it works. Tried on 2 parking dings caused by other car doors. Completely removed one dent, and almost removed other. Takes a bit of perseverance and time but worth the effort
K**A
Please think more than 100 times before buy thise
Full waste of money and time I can't find the right word say how badly I think that pròduct is ¡¡¡ ¡¿¿
Q**D
Rubbish product
didn’t work at all
K**
10out of 10
It's ok
Trustpilot
1 day ago
1 week ago
