Color:for Cadillac Compatibility: Cadillac SRX 2011--2015 Cadillac XTS 2013-2015 Specification Input Voltage: 9-16V Operation Power: 3.2W / 12.4V / 260mA Operation Temperature: -22 to +176 ¨H Light Color: Bright White Color Temperature: 6000-6500k Enclosure Materials: Acrylic PVC Changeable Logo Chip: Yes (Forever-Lens) Product Size: 3 x 1 x 1in Life Span: 30,950 h Installation£º 1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights; 2. Plug In new Door Lights With Correspondent Connector; 3. Put new Door Lights To The Spot Where Your Original Step Lights Were. 4. Done! Logo Should Be Projecting On To The Ground.
D**E
Works for 2017 F30 340i LCI M Sport...Tight fit though.
I bought 2 sets of these lights for my new 2017 340ix M Sport. I took a chance not knowing whether they would fit as the item description doesn't specifically say that they fit the latest 3 series also known as the F30. I was about to spend $115 on the OEM ones for a 2 pack until I found these which was less than 1/10 the cost. The listing states that it uses 3 watt CREE LEDs but the included paperwork says 5 watts. I'm not sure if it makes the logo brighter or last longer but I thought I clarify the item description as it appears to have been either a typo or someone just cut and pasted old specs on this listing.I'm happy to report that it absolutely fits! And they work...beautifully! They completely transform the look and feel of the car each time I get in or get out at night. They absolutely look OEM. I wouldn't have guessed that they are a 3rd party replacement just by looking at the logo projected on the pavement. It's bright. It's very sharp and the color of the M and the 3 stripes seem to be very close to the actual emblems on the car. Also, the logo actually "fades" in when I open the door which is a cool effect. That's actually the car's doing and not these lights and I don't know if all BMWs do this or not.Installation was a breeze. All you need is a flat head screw driver and a quick pry is all you need. The OEM puddle lights have a small cut where you can slip in the head of the screw driver and you simply pry downwards and the unit pops out. BE SURE to orient the actual logo so that it ready correctly BEFORE you reinstall the new logo lights. There's a little tab that ROTATES the logo so be sure to orient it correctly by projecting it onto a piece of white paper first, if you install it during the daytime like I did. These units fit VERY SNUG so you need to use a little bit of force to get them back in. No cutting was necessary of the unit or the door trim!Hope this review and my photos allow those on the fence to pull the trigger if they have an F30 like I do.
J**S
looks great and you can't beat the price
I just put the lights in the mini Cooper 2006 and it took 5 minutes to replace both of lights driver and passenger door. It was light out side when I put them in the car and I could bearly see the emblem but as soon as I got home and it was dark. Wow.. looks great and you can't beat the price.. I just wish I could do this on my 2008 scion xb.. this is so cool. This photo is out of a Samsung s8plus.. it is as is.. what you see in this photo is what you will see in real life..
X**S
Very nice, easy install, colors and lights themselves fade after 3 months
20 seconds to change out, not too much, looks better than the stock lights and gives some character. UPDATE: several months later the colors on the logo are completely faded and the lights are about as bright as the light that would come out if i hung by backside out the door and lit a bit of flatulence with a match. Because they are so cheap, I'm knocking off only 2 stars, they should have lasted more than 3 months.
C**E
Inexpensive way to add some flair to your BMW but lights buzz & hum when on.
A very cool addition to my 2014 BMW 750 Li. Installation is relatively simple (a few minutes) but these new light housings were a bit larger than the stock housings which required slight modification to the opening to get them to fit. The image is very clear like the sample picture. If the image happens to be rotated on the ground or is backwards it is easy to rotate the projector housing or flip the image around. One negative I have found is that all of the lights hum / buzz when on and it is quite noticeable when you are loading / unloading the car in a quiet environment without the radio on. The lights are only on when at least one door is open so the noise isn't present when driving.
N**.
Looks awesome but tight fit!
These look great! Exactly as advertised. I have a 2013 2 door mini cooper, it fits the light slot but it is a TIGHT fit. When installing, you have to jam it in there hoping it wont break. It looks like these are slightly larger than the mini manufactured lights, that's the only reason I'm giving this product 4 stars instead of 5. Have had it installed for a week so far with no issues and it looks awesome, not cheap or anything. Also, if you notice that the mini symbol is facing the wrong way you can adjust it on the side/inside of the lights before installation, there is a nob to make the logo face the way you'd like it to.
J**N
Sharp detail and good colors
I installed this on my 2014 435i conv. (F33) in 10 minutes, with the help of a YouTube video. Looks great, sharp detail and good colors. The BMW dealership wants $130.00 for their product. Since this one is so much cheaper I thought it would be inferior & thought about buying from my local dealership. I'm so glad that I didn't. This one looks GREAT!!! I would love to compare the 2 side by side to see if there is a difference (which I doubt) . This one is priced right and looks AWESOME.FOLLOW UP: ALMOST A YEAR WITH THIS ON MY CAR & STILL LOOKS GREAT!!
R**K
Work Beyond Expectations
I bought these for my Audi 2014 S5. I was dubious about this at first, but thought for the price, I'll try them and if they don't work, not much lost.I received them and took them back to Canada (they are not available there on Amazon) and attempted to put them in. They are designed to fit right in the door cutout after taking the original lights out, and the electrical clip is also designed to fit into Audi's electrical wiring receptacle. These lights fit the electrical requirements perfect. As for a good fit into the door, I had to use a small utility knife and pare out some plastic from around the inside of the hole in the door and then these lights fit in perfectly. As far as function, the lights work great, are bright (at night) and are quite impressive. The drivers door shows the logo clearly and perfect, the passengers side, however, shows it upside down when you view it from the passengers seat. However passers by would not notice when the door opens and it shines onto the pavement. It looks very custom and honestly, I was very impressed with how good these work. Surprised actually. Recommended for the price!
Trustpilot
2 days ago
2 months ago