3D Printer Enclosure with Ventilation Kit & LED, Premium Fireproof Dustproof Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/3 Pro/3V2/3S1/Neo/Neptune 4/3 pro 4pro

I've been 3D printing for only a couple of months and this LE enclosure with the ventilation kit has completely upgraded my setup. The fire-resistant, heavy-duty material feels reassuringly sturdy, and the clear panels let me monitor prints without losing heat or letting fumes escape. The temperature stability alone is worth it. My ABS and ASA prints that used to warp constantly now come out clean, and the enclosure keeps a consistent internal temp even in my spare bedroom(live in humid Florida) Plus, it dramatically cuts down noise – my printer is nearly silent when the panels are closed. The ventilation kit is the real standout. I vented mine out a nearby window, and the difference in air quality is night and day. No more lingering resin or filament smells in my workspace. The included ducting and fittings were easy to set up, and the fan moves plenty of air without being obnoxiously loud. Assembly was straightforward – the poles snap together securely, and the cover zips on smoothly with reinforced seams. It fits my larger bed slinger with room to spare, and the built-in LED ports and storage pockets are thoughtful touches. For safety, temp control, and fume management, this is hands-down the best value enclosure I've found. Five stars.

Honestly one of the best prices for what you get. Good stitching and window plastic quality. compatible with many printers and sizes. Assembly was easy enough. Comes with a light and a fan, Most competitors in this price range have neither or only one.

The enclosure was easy to set up and assemble, and it was compatible with several printers I have tried it on. It doesn't have temperature control but it does have a thermometer so you can monitor the temperature. I have usedit for several months and the fan and light still work reliably. The main negative thing is that you cant move the fan to either side, it has to be at the right side, which isnt always convenient for the location you put it in. The value for money isn't great as you can probably build a better enclosure for cheaper and have it fit your needs perfectly as it would be custom built, but I enjoy the product and am giving it 4 stars

I purchased this 3D printer enclosure to create a safer, more controlled environment for my workspace. After using it for a while, here are my thoughts: Build Quality and Design: The enclosure is constructed well enough. The frame is flimsy plastic. But I figure if I ever damage a part, I should be able to repair it easily. The transparent panel with the zipper is fine. With the fan running, I can leave the front open sometimes and not smell much of the resin. The included ventilation system works effectively to extract odors. But you have to figure out your own attachment for the other end of the hose. I 3d printed a part for it to blow straight out a window. The fan is not quiet but it doesn't bother me. The light is nice. I don't need a "Thermo-Hygrometer" but the temp display is useful. It is large enough to accommodate most 3D printers, I have two in this one.

Good quality and value! The assembly of this enclosure, however, is where it really shines. It is very well designed and simple enough that anyone can put it together. You CAN watch a YouTube video on how to assemble this, but I recommend using the instruction manual that the package comes with. Tip: When you drop the frame into the jacket, make sure to follow what the instruction manual shows: Drop from the top and straight down. If not, it MAY seem like the frame doesn't fit. The YouTube videos show it another way. I also recommend working on a flat surface large enough to fit both the frame and the jacket side by side. This worked perfectly with my Ender 3 Pro. It's totally compatible with the modification I made to the orientation of the filament spool. Overall, I am very impressed with this product and, most importantly, it will to be very useful for what I am doing.

At about $70, I didn’t have high expectations for this enclosure. I expected it to work at the minimum acceptable level for what it promised and nothing more. Instead, I was pleasantly surprised to find a product with nice build quality, fast assembly, and an excellent ventilation system. Pros: -Great price -Easy assembly (took me 10-15 minutes to get everything set up with my printer inside) -LED light bar is a nice touch. Due to the reflective interior fabric, the light really illuminates everything. -The ventilation system is great. While it’s not absolutely airtight, the difference in air quality in my printer room is miles ahead of what it used to be (even with windows open). -Fits many/most hobbyist printers (I have an Elegoo Neptune 4 in here) Cons: -Zippers are a little finicky. I hope they hold up over time. -Window panel came with a crease in it that likely won’t come out. -Light and fan are both USB powered but didn’t come with an adapter or hub. Since many hobbyists likely don’t have two open USB ports on their printer, managing power for these accessories requires planning. Not a big deal but worth noting. All in all I’m very pleased. If this holds up well in the coming months it will be a great purchase. I will update if any issues arise.

Purchased the Premium version with exhaust because the description listed compatibility with the Creality Ender-3 S1 Plus 3D printer. While the printer fits inside the enclosure, it is not deep enough to allow the build plate to slide forward/backward completely. It's around 3-4 inches too short. If you're not doing prints that reach the front/back edges of the build plate, it works fine. The cover material seems very durable and feels like it will last a long time. The LED light works well but it's a USB cable (and not a very long one), so you'll need an adapter to plug it in. The support bars are the typical plastic/fiberglass ones which you must slide into plastic connectors. The poles do not always slide into the connectors easily and the connectors break easily if you try to push the poles in too hard. The side pocket is a good size. The overall stitching seems good and the zippers move easily without feeling like they're going to fall off. I haven't assembled the exhaust yet, but the parts look decent enough. Once assembled, the enclosure does a good job of reducing external heat and noise and keeping dust off the printer. The cover is kept fairly taut and there's no annoying sagging on the top or sides, but it's not so tight that you're afraid the poles will snap. I wouldn't put anything heavy on the top, but on its own, it should last. Overall I'd recommend it for machines smaller than the Ender-3 S1 Plus. Don't pay attention to the description of what it says it will fit, take the time to check the exact measurements you need. I removed a star because it says it fits the Ender-3 S1 Plus but it does not.

Strong fan, works as expected, only issue is that the humidity sensor temperature reader is only in celsius, and comes with no buttons to change it. The led is bright but the cable could be longer for it.

Tolles Gehäuse für den Drucker. Mein Ender 3 V3 KE passt locker hinein, sodass ich nebenan noch zwei zusätzliche Spulenhalter platzieren kann. Der Drucker hat in alle Richtungen genug Platz zum Verfahren. Qualitativ kann man auch nichts sagen. Scheibe ist gut, Reißverschlüsse sind top und der Aufbau ist kinderleicht. Handschuhe sind auch dabei, sodass man sich an den Stangen keinen Splitter einfängt o.ä. Passvorm vom Rahmen und die umhausung ist auch sehr gut. Licht ist schön hell, allerdings sind die mitgelieferten Halterungen eher nicht so gut (Kabelbinder regelt). Die Kabeldurchführung ist auch etwas klein (reicht gerade so für den Stecker einer KGL) aber hierzu kann auch die seitliche Öffnung (Sideload) genutzt werden. Diese lässt sich gut via Klettverschluss wieder verschließen. Die Absaugung leistet auch gute Dienste, lediglich ein Filter wäre schön gewesen. Dennoch hält die umhausung den Geruch von geschmolzenem Plastik gut im inneren. Alles in allem ein toller Artikel der das drucken auch im Keller, der Garage oder anderen unbeheizten oder staubigen Räumen ermöglicht.

Frame extremely weak, assembled it on a soft couch and with pushing the frames (according to manual) together it simply broke. Save your money on a stronger construction

I put my BambuLab P1S in this and it works great and gives me peace of mind. No more PLA smells while printing as it all vents outside. I did need to cut down the supports a bit which were a bit too long, but wasn’t too big of a job.

everything you need in a print enclosure, plenty of space, fan is powerful

J'avais déjà des caissons en "dur" avec profilé alu, pvc, plexi, etc.... Vu le prix des matériaux, pour rentré une geeetech A10 très modifiée, je ne voulais pas investir beaucoup, j'ai donc choisi ce caisson. Très surpris de la qualité et la solidité de l'ensemble, l'éclairage est parfait, tout est bien pensé, sauf qu'il manque la plaque de fixation du ventilo d'extraction (à imprimer donc) sinon il ne tient pas, c'est la seul défaut. Pour vous donner une idée de la taille, la geeetech (taille ender 3) rentre à l'aise dedans. Une sidewinder X1 loge sans le support de bobine, ça vous donne l'idée de la taille : c'est grand !