18m Greenhouse Glazing Rubber

I ordered this back in June as I wanted to replace all the glazing rubber on the roof of our large aluminium green house prior to sealing the glass panels in with silicone sealant (was fed up with the recent strong winds getting the better of the panels on the roof).After stripping the roof of it's glass and thoroughly cleaning all surfaces ready for the new rubber, I wanted to make sure the fitting was as easy as possible as I had noticed other reviewers saying that the fit was very tight. Luckily, I had the sun on my side and it was nice and warm on the day, but to make sure things went smoothly I first did a quick measure of each frame section and cut the rubber to size prior to soaking it, you will understand why I did this when you see how the product arrives! Let's just say that a 18m pile of fresh rubber stuck together could give you a major headache if you tried cutting/fitting it as one piece.So after cutting all required pieces to size I then put the lot into a washing up bowl of hot water with a little washing up liquid added, left that for 15 minutes then started to fit. I will be honest and say that it is a tight fit but then once on you know it won't move! With the help of my son we had the entire roof frame fitted with the new rubber seals in under 90 minutes and I really believe that we only achieved this due to the hot water AND the all important washing up liquid (agitated and foamed up a little before hand).Tip: Maybe obvious; but start with the rubber at the top of the frame and work downwards as the warm soapy water will then run down the frame as you apply the rubber acting as a lubricant.The end result was a good solid foundation for the glass which is key if you don't want problems further down the line, and now the silicone sealant is applied I feel the green house roof is ready for most all strong winds (*fingers crossed*).So all in all I'm very pleased with the product, yes it's a tight fit but that means that it won't move around on the frame, also it doesn't deform when you fit the glass like some others so is a good base for an install that you can feel reassured about. For the price I'd highly recommend this, but please do consider using the hot soapy water - your sanity will thank you!

8x6 greenhouse, so ordered 3 packs, did the job very well, reomoved every pane for cleaning, fitted the new seals with the aid of a small amount of washing up liquid in a water spray. easy as anything. just make sure you clean the frame edges with a bit of emery or like. had a small piece left over, about 2ft.

The rubber fitted correctly and now the glass seal as it should. Only problem was that the section used to tie off the rubber folded the groove over which made it difficult to later use. It would be better to use another medium to tie the rubber up.

Found it easy to fit after I was told to rub washing-up liquid to the metal edges of the greenhouse.

Glazing greenhouse/ difficult to fit

Good quality product, just what we needed for our greenhouse. Delivery was delayed but nothing the supplier could do about that it was despatched quickly.Will use them again for certain.

Arrived very quickly and was a perfect match to the old worn out stuff. Has breathed new life into my greenhouse. Would certainly order again.

Great product